Hi All,
Thanks siji. I do take care of that. So I am starting new thread with this.
Kernel compile really testing my patience. I have cross compile the linux kernel 2.6.35 for mips based system. When i loaded that to the device and rebooted the device its booting device but not falling or reaching the shell prompt so because of that I am not able to access the shell.
Can someone help me where I made mistake.
This is what the log message says...
1. For compiled image vmlinux
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.10.24 11:19:04 =~=~=~=~=~=~=~=~=~=~=~= <--LAN_LAN91C111_install() ##HW_CFG--zmh---get HW_CFG--- is 0x00050000. LCD has been installed! Panel(WVGA_800x480), 800x480 frame_buffer =0x81800000 Start to display framebuffer! Display down!
YAMON ROM Monitor, Revision 02.27GDB1200. Copyright (c) 1999-2004 MIPS Technologies, Inc. - All Rights Reserved.
For a list of available commands, type 'help'.
CPU/SBUS/DDR in MHz: 492/164/164
Compilation time = Nov 23 2010 17:12:04 MAC address = 00.00.01.02.30.40 Processor Company ID = 0x03 Processor ID/revision = 0x02 / 0x02 Endianness = Little CPU = 492 MHz Flash memory size = 8 MByte SDRAM size = 256 MByte First free SDRAM address = 0x8008fdb0
Environment variable 'start' exists. After 2 seconds it will be interpreted as a YAMON command and executed. Press Ctrl-C to bypass this.
-----------------------zmh---- -------------lcd --init-----panel-------111111111------- Panel(WVGA_800x480), 800x480 -----------------------zmh-----------------lcd --init-----panel-------222222222222------- -----------------------zmh-----------------lcd --init-----panel-------33333333333------- -----------------------zmh-----------------lcd --init-----panel-------444444444444444444------- -----------------------zmh-----------------lcd --init-done-- -----------------------zmh-----------------lcd -----setlocation-----frame_buffer =0x81800000 -----------------------zeng-----------------go-----vmlinux------- files: 9FD08B98, address: 9FD08B4C, jump: 0
--------------------------------------------- Loading Image: vmlinux.rec (Format = SREC) TTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT TTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT TTTTTTTTTTTTTTT Image Loaded Successfully. --------------------------------------------- Program Entry Point: 80104610 Executing Application Linux version 2.6.35 (root@pravin-P5GZ-MX) (gcc version 3.4.4) #1 Sat Oct 22 12:49:09 IST 2011 bootconsole [early0] enabled CPU revision is: 04030202 (Au1250) (PRId 04030202) @ 492.00 MHz Alchemy/AMD/RMI DB1200 Board, CPLD Rev 0 Board-ID 0 Daughtercard ID 8 Determined physical RAM map: memory: 10000000 @ 00000000 (usable) Zone PFN ranges: Normal 0x00000000 -> 0x00010000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00010000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 Kernel command line: PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes Memory: 255308k/262144k available (2601k kernel code, 6836k reserved, 684k data, 164k init, 0k highmem) Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:128 Alchemy clocksource installed Console: colour dummy device 80x25 console [tty0] enabled, bootconsole disabled <--LAN_LAN91C111_install() ##HW_CFG--zmh---get HW_CFG--- is 0x00050000. LCD has been installed! Panel(WVGA_800x480), 800x480 frame_buffer =0x81800000 Start to display framebuffer! Display down!