Hi all,
 
        In the installation of the RHL7.1, I found that it does not
allow me to install Workstation mode in a dual bootable system
with a lilo prompt. So I decided to give cusom setup. But I still
stucked up at the disk partitioning part.
        So can somebody tell me how should I partition the disk
& mount it to the different mount points.
        My present disk partitions are:
 
The Disk Druid shows the following chart
--------------------------------------------------------------------
Partitions
Mount Point     Device   Requested     Actual    Type
<not set>         hda1     3898M         3898M   win95 FAT32
<not set>         hda5      3859M        3859M   win95 FAT32
<not set>         hda6     3859M        3859M   win95 FAT32
<not set>         hda7      3961M        3961M   win95 FAT32 
 
  Add Edit  Delete  Reset  Make RAID device (BTW wht is RAID)
----------------------------------------------------------------------
Drive Summery
Device    Geom [c/h/s]     Total(M)   Free(M)    Used(M)  used (%)
hda        [2481/255/63]     19461M    3883M      15578M    80 % 
 
----------------------------------------------------------------------
So I have around 3.8GB for linux.
   
    How much minimum space should I assign to these mount
points:
 
/
/boot
/usr
/home
/var
/opt
/tmp
/usr/local
 
    Do I need to assign any FAT partition to any mount point
I tried this & found that only /home & /opt are allowed in the
FAT partitons. Will it be OK if I assign them to FAT partition
 
 
Thanks & Regards,
SAMEER :))
 
~~~~
Try Try till you get succeed
 
My Messanger IDs
MSN       : s2sameer    Yahoo!    : s9sameer
RediffBol : s2sameer     Indiatimes: s2sameer
AIM        : s2sameer