On Tuesday 05 April 2011 07:14:15 H.S.Rai wrote:
On Tue, Apr 5, 2011 at 12:13 AM, jtd jtd@mtnl.net.in wrote:
On Monday 04 April 2011 23:25:32 Rony wrote:
Fax machines/modems sometimes do not recognise EPABX circuits.
How there are two other fax machines, which work fine (without any need to do any change any where) on same EPABX
<snip>
However the network (phoneline) interface (usually) has dip switches / jumpers which can be set to overcome this problem.
For the modem in question (a tiny USB device) I doubt any such facility would be available for setting voltages.
You are right ;-(
Try out your config on a direct line at least for testing and cross checking.
OK
Revert back with the results of the test. The fact that minicom reports "ring" shows that the ring detect is ok.
Regarding setting ring cadence I will have to google. I knew quite a number of AT commands
Would appreciate help in this regards.
Will it be possible to have a new modem which cam work with EPBAX or that will be impossible.
IMO this modem will work too, with appropriate settings. Just hold on for a day or two as I am tied up with some other work.