Not pretty to see that those with queries are still being insulted on this list. Admins, kick out the rabid and the insane. Why don't we make a fresh start?
Regards Suhit Kelkar
Hi All,
Kernel compile really testing my patience. I have cross compile the linux kernel 2.6.35 for mips based system. When i loaded that to the device and rebooted the device its booting device but not falling or reaching the shell prompt so because of that I am not able to access the shell.
Can someone help me where I made mistake.
This is what the log message says...
1. For compiled image vmlinux
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2011.10.24 11:19:04 =~=~=~=~=~=~=~=~=~=~=~= <--LAN_LAN91C111_install() ##HW_CFG--zmh---get HW_CFG--- is 0x00050000. LCD has been installed! Panel(WVGA_800x480), 800x480 frame_buffer =0x81800000 Start to display framebuffer! Display down!
YAMON ROM Monitor, Revision 02.27GDB1200. Copyright (c) 1999-2004 MIPS Technologies, Inc. - All Rights Reserved.
For a list of available commands, type 'help'.
CPU/SBUS/DDR in MHz: 492/164/164
Compilation time = Nov 23 2010 17:12:04 MAC address = 00.00.01.02.30.40 Processor Company ID = 0x03 Processor ID/revision = 0x02 / 0x02 Endianness = Little CPU = 492 MHz Flash memory size = 8 MByte SDRAM size = 256 MByte First free SDRAM address = 0x8008fdb0
Environment variable 'start' exists. After 2 seconds it will be interpreted as a YAMON command and executed. Press Ctrl-C to bypass this.
-----------------------zmh-----------------lcd --init-----panel-------111111111------- Panel(WVGA_800x480), 800x480 -----------------------zmh-----------------lcd --init-----panel-------222222222222------- -----------------------zmh-----------------lcd --init-----panel-------33333333333------- -----------------------zmh-----------------lcd --init-----panel-------444444444444444444------- -----------------------zmh-----------------lcd --init-done-- -----------------------zmh-----------------lcd -----setlocation-----frame_buffer =0x81800000 -----------------------zeng-----------------go-----vmlinux------- files: 9FD08B98, address: 9FD08B4C, jump: 0
--------------------------------------------- Loading Image: vmlinux.rec (Format = SREC) TTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT TTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT TTTTTTTTTTTTTTT Image Loaded Successfully. --------------------------------------------- Program Entry Point: 80104610 Executing Application Linux version 2.6.35 (root@pravin-P5GZ-MX) (gcc version 3.4.4) #1 Sat Oct 22 12:49:09 IST 2011 bootconsole [early0] enabled CPU revision is: 04030202 (Au1250) (PRId 04030202) @ 492.00 MHz Alchemy/AMD/RMI DB1200 Board, CPLD Rev 0 Board-ID 0 Daughtercard ID 8 Determined physical RAM map: memory: 10000000 @ 00000000 (usable) Zone PFN ranges: Normal 0x00000000 -> 0x00010000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x00010000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 Kernel command line: PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes. Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes Memory: 255308k/262144k available (2601k kernel code, 6836k reserved, 684k data, 164k init, 0k highmem) Hierarchical RCU implementation. RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:128 Alchemy clocksource installed Console: colour dummy device 80x25 console [tty0] enabled, bootconsole disabled <--LAN_LAN91C111_install() ##HW_CFG--zmh---get HW_CFG--- is 0x00050000. LCD has been installed! Panel(WVGA_800x480), 800x480 frame_buffer =0x81800000 Start to display framebuffer! Display down!
On 25 October 2011 11:22, Suhit Kelkar suhitkelkar@gmail.com wrote:
Not pretty to see that those with queries are still being insulted on this list. Admins, kick out the rabid and the insane. Why don't we make a fresh start?
Regards Suhit Kelkar -- http://mm.ilug-bom.org.in/mailman/listinfo/linuxers
On Tuesday 25 Oct 2011 11:22:18 Suhit Kelkar wrote:
Not pretty to see that those with queries are still being insulted on this list. Admins, kick out the rabid and the insane. Why don't we make a fresh start?
Please tone down the rhetoric. There was nothing of what you allege in any of the replies. If following list etiquette on THIS LIST is such a problem, do find another list without such guidelines.
It is utterly insensitive on the part of posters to not read the list guidelines and then fill everybody's mailboxes with gunk.
On Tue, Oct 25, 2011 at 11:22 AM, Suhit Kelkar suhitkelkar@gmail.com wrote:
Not pretty to see that those with queries are still being insulted on this list. Admins, kick out the rabid and the insane. Why don't we make a fresh start?
I do not perceive KG's comment as an insult, rather he was pointing out a proper way to post queries to the mailing list.
The zebra road crossings and traffic signals are there for a purpose; to have some order/rules on the road, so that there is no chaos. Unfortunately over the years that self discipline, within the public, has gone down the drains. At a personal level, when I try to correct the public's behaviour, the majority reaction is "mind your own business"
LIkewise, if such behaviour is not corrected then the posters will develop a bad habit and will give a damn to list guidelines.
My two cents. -- Arun Khan
-
Arun Khan -
jtd＠mtnl.net.in -
Pravinkumar Chavan -
Suhit Kelkar