RECENTLY, a shiftover of mail-servers in Goa (from Goatelecom to Sancharnet.in) caused quite a few glitches in e-mail access here. Below are some threads from the debate. We are trying to find solutions (many have been found), and seek your help in pointing us in the right direction. Please note that some of the suggestions below are tentative and not tested in all conditions. Hence, your suggestions on these, and pointing out of inaccuracies, would be more than welcome. Kindly send your responses to fred@bytesforall.org with subjectline reading EMAIL FAQ... FN
------------------------------------------------------------------------- DRAFT FAQ: FOR GNULinux EMAIL USERS IN GOA, INCLUDING THOSE ON SANCHARNET ------------------------------------------------------------------------- Compiled by FN for ILUG-Goa
It is found that sancharnet does not accept webmail logging from konquerer, but from mozilla it works. I am using RH 7.2. Dialling through kppp script is also not smooth due to long time it takes for password authentication. Has anybody else in the list found the same problem? -- Bijon B Shaha bbshaha@gmx.net
I had to enable the silent option in /etc/ppp/options to enable wvdial to connect. But this connect now takes ages at least 1.5 min from handshake tone to final connection. Is this a problwm with Sancharnet speeds? Or is it a problem with my machine? What's the best and fastest connect setting? I'm using wvdial.. no extra settings in the file. -- Ashely Delaney delaneyashley@softhome.net
For me after the silent option I get the connection and it takes around 30 secs to connect.
That's about as long as it takes for me also... This is almost 20-25 seconds slower then Windows based systems. I tried it out! I don't like my Linux box slower then something else :-(
In wvdial.conf, will Stupid Mode =1 be of use?
Nope.. tried that. The stupid thing does just that. Starts ppp before username and password and hence disconnects almost immediately. BTW I must note that with the option passive it took 30 seconds, and with option 'silent' it took 1 min and the next time it disconnected. Any ideas??? -- Ashley Delaney delaneyashley@softhome.net
Wvdial which used to work flawlessly for dialling to goatelecom has become unusable due to long authentication time required by Sanchanet. The program after starting desparelty ppp waits and waits and waits and eventually comes out to start redialling. Has anyone found a solution as many linux users use wvdial for automatic dialling? -Bijon B Shaha bbshaha@gmx.net
I use wvdial and have to enable 'silent' option in /etc/ppp/options to make sancharnet dialing to work with wvdial. However after configuring using debian tool pppconfig and using pon and poff it worked in the first shot. Still there are problems while sending mails using sancharnet smtp. -- Rajesh Fowkar
Use PAP authentication without dialup script or terminal. -- Derek Cordeiro derek_cordeiro@gmx.net
-------------------------------------------------------------------------
Does anybody know how to configure Mozilla mail to handover outgoing mail to exim? -- Mahesh T Pai
Very simple. Just put your outgoing smtp server as localhost (or your machine hostname) Exim listens on the port 25 of your local machine as defined in your inetd.conf file. You don't need to edit it. Just a tip: If you use fetchmail to retrieve your email you can install one of the many available pop3 servers. UW i.e. university of washington pop3, imap is quite good. derek_cordeiro@gmx.net
-------------------------------------------------------------------------
Wanna get your hotmail email in a linux email client? Use hotwayd proxy server http://hotwayd.sourceforge.net/ -- Derek Cordeiro derek_cordeiro@gmx.net
-------------------------------------------------------------------------
There are problems while sending mails using sancharnet smtp. -- Rajesh Fowkar
smra.sancharnet.in requires SMTP authorization. Old email clients do not support authorization. Change your email client. You may not be able to send email using an MTA such as sendmail, postfix, exim etc.. Use an email client directly or get the use of an alternative SMTP server(relayhost) -- Derek Cordeiro derek_cordeiro@gmx.net
Strange -- I had no problems in setting up wvdial. It just worked with same options as for Goatelecom. Regarding the mail sending -- a line on CSI-Goa (Computer Society of India-Goa chapter) list helped. I got three helpful responses. Sancharnet requires authentication for sending mails. I set that option on Sylpheed and it is working. -- Anil Seth anilseth@sancharnet.in
Thats good to hear. But does wvdial.conf have the option Stupid Mode = 1 enabled?
Sylpheed supports SMTP auth. Not all email clients support the same. Older versions of kmail -- e.g. kmail on RHL7.2 Debian woody 3.0, Mandrake 8.1 -- do not support smtp auth.
MTAs most probably will not support the same as they are full fledged SMTP servers and not any email client like Sylpheed.
Sancharnet could, like many other servers, have allowed POP before SMTP authentication so that most users (using sendmail, postfix, old email clients) will be able to use the given SMTP server
BTW users of old versions of ppp should use 'passive' instead of 'silent'. -- Derek Cordeiro derek_cordeiro@gmx.net
-------------------------------------------------------------------------
Debian vs Redhat: In Debian the wvdial package contains a file /etc/ppp/peers/wvdial-pipe whereas in RedHat Lnx the same does not exist. Is it that this file is not important?(Then why does it continue to exist even in Knoppix?) There is a utility called pppstatus in Debian Woody(and Knoppix). The same I downloaded and compiled on Mandrake, RedHat, But it fails to do the job (it provides a terminal interface graph). Has anyone tried it, Any answers? -- Derek Cordeiro
I can add a lot to that since yesterday I made a mess of my dialup accounts. Redhat ppp dialer (rather the ifup-ppp script) also uses a file in the same directory. It is created with the names like ppp0, ppp1. It contains the command for connecting to the ISP using wvdial. (These files should actually be temporary and dynamic and should be cleaned up when the connection is closed. My problem may have been a side effect of abnormal terminations.)
For the curious, I used a shortcut to make sancharnet correspond to ppp0. The idiot kept dialing goatelecom! I got rid of goatelecom entry in wvdial.conf. It then complained about no phone number. Oh, well. I learnt - short cuts are dangerous.
Regarding the ppp status, from my experience with Modem Lights, I would guess that these programs actually use the Modem Lock file for the status. If the modem is using /dev/ttyS0 and the monitoring program is using /dev/modem, the status will not be shown. The file name will be something like /var/lock/LCK..ttyS0 -- Anil Seth anilseth@sancharnet.in
These files i.e. ppp0, ppp1 to my knowledge only contain a command wvdial with different options. The file "wvdial-pipe" contains pppd options like "noipdefault" etc. That's the reason I want to know it's significance.(It does not contain the command wvdial)
The RedHat Network control creates ppp0, ppp1,...only upto version 8.0. RHL 9.0 directly edits the /etc/wvdial.conf file. There are additional settings in /etc/sysconfig/network(network-scripts) folder-- Derek Cordeiro
---------------------------------------------------------------------------- ILUG-Goa, a network with a difference: sharing software, knowledge and ideas ----------------------------------------------------------------------------