Maybe we could initiate some tech topics and post such articles on fsf-prog ... i am sure it will help
======================================================= How to Compile 2.6 kernel for RedHat 9/8 Mike Chirico Last Updated: Mon Apr 5 06:45:59 EDT 2004
The latest version of this document can be found at: http://prdownloads.sourceforge.net/souptonuts/README_26.txt?download
For configs ref: http://sourceforge.net/project/showfiles.php?group_id=79320&package_id=1...
STEP 1:
Download the latest version of the kernel and any patches. This documentation is done with linux-2.6.3, but look for later versions. http://www.kernel.org/pub/linux/kernel/v2.6/
Also take a look at http://www.codemonkey.org.uk/post-halloween-2.5.txt
This has some useful hints on some of the changes needed.
STEP 2:
Download the latest version of module-init-tools "module-init-tools-3.0.tar.gz" and "modutils-2.4.21-23.src.rpm"
http://www.kernel.org/pub/linux/kernel/people/rusty/modules/module-init-tool... http://www.kernel.org/pub/linux/kernel/people/rusty/modules/modutils-2.4.21-...
STEP 3:
Install module-init-tools. This will replace depmod [/sbin/depmod] and other tools.
tar -zxvf module-init-tools-3.0.tar.gz cd module-init-tools-3.0 ./configure --prefix=/sbin make make install ./generate-modprobe.conf /etc/modprobe.conf
STEP 4:
Install modutils-2.4.21-23.src.rpm. You may get warnings about user rusty and group rusty not existing. Also, yes, you'll have to force the install. If you don't do these steps for both Redhat 9 and Redhat 8, you'll have problems with the make modules_install.
rpm -i modutils-2.4.21-23.src.rpm rpmbuild -bb /usr/src/redhat/SPECS/modutils.spec rpm -Fi /usr/src/redhat/RPMS/i386/modutils-2.4.21-23.i386.rpm
STEP 5:
Install and configure the kernel. Do NOT use the /usr/src/linux area! Reference the README. I put my files in /home/src/kernel/
gunzip linux-2.6.3.tar.gz tar -xvf linux-2.6.3.tar cd linux-2.6.3
If you have patches install these now:
bzip2 -dc ../patch-2.6.xx.bz2 | patch -p1
STEP 6:
Copy the appropriate /usr/src/linux-2.4/configs [kernel-2.4.20-i686.config, kernel-2.4.20-i686-smp.config] to .config in whatever directory you are installing. In my case it's /home/src/kernel/linux-2.6.3
cp /usr/src/linux-2.4/configs/kernel-2.4.20-i686.config \ /home/src/kernel/linux-2.6.3/.config
If you don't have the source configs, you can download them from here:
https://sourceforge.net/project/showfiles.php?group_id=79320&package_id=...
I've also included a file config2.6-chirico which was a 2.6 version for some of my systems. This isn't a bad reference if you run into trouble.
STEP 7:
Assuming you copied the appropriate kernel-2.4 config to .config, run the following which will run through necessary questions for the 2.6 kernel. Or, you might want to use the config2.6-chirico...this has already been run through make oldconfig on my system, and I've answered the necessary questions for a general system.
make oldconfig
STEP 8:
This is very important. Make sure you're .config has the following in it CONFIG_EXT3_FS=y You'll run into the following error if you leave this =m instead of =y:
pivotroot: pivot_root(/sysroot,/sysroot/initrd) failed
This is because Redhat 9.0 and 8.0 use the ext3 filesystem for /boot ...
STEP 9:
Edit the Makefile and add changes to the Extraversion as desired. Patches will update these values as well.
VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 3 EXTRAVERSION = -skim-ch6
STEP 10:
make bzImage
STEP 11:
make modules
STEP 12:
make modules_install
STEP 13:
make install
If you come across errors here, what version of "depmod" is being picked up in your path?
Also, if you get a module not found, say the following: No module aic7xxx found for kernel 2.6.x Then, in /lib/modules/2.6.x/kernel/drivers/scsi/aic7xxx/ cp aic7xxx.ko aic7xxx.o
insmod should look for aic7xxx.ko ;but , it looks for aic7xxx.o
If you still have trouble, make the following change in the .config CONFIG_BLK_DEV_SD=y and go back to STEP 10.
You also may want to ref kernel-2.6.3-i686-smp-chirico-aic7xxx.config in http://prdownloads.sourceforge.net/souptonuts/configs-0.3.tar.gz?download
STEP 14:
mkdir /sys
STEP 15:
/etc/rc.sysinit needs to be modified. Look for the following line:
action $"Mounting proc filesystem: " mount -n -t proc /proc /proc
and after this line enter the following:
action $"Mounting sysfs filesystem: " mount -t sysfs none /sys
Here's my /etc/rc.sysinit for reference:
http://prdownloads.sourceforge.net/souptonuts/rc.sysinit.txt?download
Be very careful at this step. Backup the /etc/rc.sysinit file.
Thomer [http://thomer.com/linux/migrate-to-2.6.html ] also added changes to /etc/fstab. I only had to do STEP 16 below.
STEP 16:
Add the following to /etc/fstab for usb support.
/proc/bus/usb /proc/bus/usb usbdevfs defaults 0 0
STEP 17 (CHECKING EVERYTHING):
Check the following:
a. The new image file should be installed on boot and there should be sym link to it. My latest kernel is 2.6.3-skim-ch6, and I got the "-skim-ch6" from the values I put in the Makefile, so I see the following:
_________________________________________________________________ Post Classifieds on MSN classifieds. http://go.msnserver.com/IN/44045.asp Buy and Sell on MSN Classifieds.