Dear Luggers,
Hi...2 all.....
I m facing a problem for configuring 2 NIC for sharing
my Internet Connection.
Plz. find the complete problembelow.
I m having 2 Machines. On one I m having Direct Cable
Internet Connection...i.e. on Ethernet Technology.
And that machine is having Linux 7.1 with Squid
configured properly. I want to share that on 2-3
machines. All other machines having Win98. I want to
set up its TCP/IP Configuration as Using DHCP Server
and I want to make my first PC as DHCP Server for my
Internal Network. For that matter I edited the file
/etc/dhcpd.conf
Its contents is as follows in /etc/dhcpd.conf
subnet 192.168.0.0 netmask 255.255.255.0
{
range 192.168.0.2 192.168.0.10;
option subnet-mask 255.255.255.0;
option broadcast-address 192.168.0.255;
option routers 192.168.0.1;
}
subnet 202.131.99.81 netmask 255.255.255.0
{
option broadcast-address 202.131.99.255;
option routers 202.131.99.81;
}
And then I restart DHCP Service using "dhcpd -f"
command. Then it has given me error as follows.
Listening on Socket /etc/192.168.0.0
Sending on Socket /etc/192.168.0.0
No subnet declaration for eth0 (202.131.99.81)
Please write a subnet declaration in your dhcpd.conf
file for the network segment to which interface eth0
is attched.
exiting.
My Internet Service Provider has provided us some
fixed IPs...I would like to mentioned that I already
started Squid for Netsharing. After that I've provided
all the machines IP address manually. And I can be
able to browse the websites. But I want to make my
Linux machine as DHCP server for my Internetwork.
So, in above situation where the defect amy be left by
me...????
Plz. suggese me some solution for that.
Regards,
[Ashish Desai]
__________________________________________________
Do You Yahoo!?
Send your FREE holiday greetings online!
http://greetings.yahoo.com
>
AFAIK It is disallowed
First enable XAA, specify that you have only 4MB on your videocard
Turn on turboqueue and fast_vram and force the dacspeed to 175 you should see
a marked improvement in the cards performance.
If you are still having problems use XAAnopixmapcache option
it worked for me.
I will mail you the XF86Config file
>With X3.3.6 after tweaking modelines, I had a res of 1280x1024 24bpp with
>SIS6326 and samtel monitor. X4 gives a resolution of 1024 x 768 with bad
>displacements and "aspect ratio".
>So how do I specify the modeline or is it disallowed.
>
>
>
>_________________________________________________________
>Do You Yahoo!?
>Get your free @yahoo.com address at http://mail.yahoo.com
>
>_______________________________________________
>http://mm.ilug-bom.org.in/mailman/listinfo/linuxers
Distro RH6.2 (zoot i think)
Mount -t vfat /dev/hda1 /win
results in unable to mount /dev/hda1 bad major or minor number
ls -l /dev/hda shows major as 3 and minor as 0 (3, 1 in case of hda1) which
afaik is correct.
This is a 17gb disk on a machine with bios which can read only 8 gb.
Exceept for the above problem linux occupying the upper 8gb works happily.
I wanted to move some stuff from the ext3 partitions on to the vfat
partitions before installing woody.
jtdesouza(a)yahoo.com
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
where have the modelines for X4.02 been relocated to. The
/etc/X11/XF86Config-4 does not have mode lines.
jtdesouza(a)yahoo.com
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
A company in Thane requires people with Linux expertise:
Skills required:
Linux installation, package selection, kernel config (added advantage),
networking.
Loading new hardware in real time system.
Loading device drivers (provided by card vendor).
Troubleshooting and ability to fix bugs.
C/C++ programming on Linux platform for real time applications.
Other skills added advantage.
Contact along with this mail:
prolific(a)bom3.vsnl.net.in <mailto:prolific@bom3.vsnl.net.in>
Anand
Hi all
1) Can squid direct all the http request to another proxy. If yes how.
2) Can I block certain sites. Deny user from browsing some site.
3) Can blocking be user based. like some to denyed and other allowed.
Hopeing for positive anws....
Thanks
priyadarshi
_____________________________________________________________
Seems that the VM change in 2.4.10 and later is the cause of problems
related to ext3.
Read on.
http://linuxjournal.com/article.php?sid=5676
jtdesouza(a)yahoo.com
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
I need the debian woody Cds. Where can I get a set ? Seascope folks only seem
to have potato.
regards,
Sharukh.
btw I am in south Mumbai.
--
Dr. Sharukh K. R. Pavri.
Mumbai, India.
Here's the situation:
Net DSL Windowsbox LAN(dhcp) Linuxbox
The LAN, naturally, has a 192.168.0.0 range of IPs (I think it's a
class C). The DSL modem is connected to the Winbox on USB and the LAN
is a 5-port hub supporting a windows network, with my Linux box (say
hello to gort, folks) creeping in using dhcpd.
The Linux box, and any box on the LAN, can access everything. I think
the Net cannot access anything but the Windows box on the DSL modem
(see <http://gort.cjb.net/>. That's the Winbox.).
Now I need POP3 (and HTTP et al, if possible) access to the Linux box
from the outside world. IP forwarding is enabled on the Winbox.
What do I do now?
PS: Can I get a static IP on the internal network with minimal changes
to the other boxen?
--
Satya. <URL:http://satya.virtualave.net/>
US-bound grad students! For pre-apps, see <URL:http://quickapps.cjb.net/>
