hello guys,
do anyone knows where i could get dual layer PCB printed, its proxmark3 pcb,
i had contacted some companies but the are too high some asking abt 4000rs
for single PCB
Thank u,
Jalinder.
I intend to purchase a Lenovo ThinkPad which comes pre-installed with
Windows 8.1.
Since I will be installing Ubuntu from the moment the machine is first
switch on, is there any possibility of getting a refund on the unused
Windows 8.1 license?
If yes, may I know the general procedure?
Thanks,
~Mayuresh
https://mm.ilug-bom.org.in/ is down.
The connection has timed out
The server at mm.ilug-bom.org.in is taking too long to respond.
http://mm.ilug-bom.org.in/
ERROR The requested URL could not be retrieved
------------------------------
The following error was encountered while trying to retrieve the URL:
http://mm.ilug-bom.org.in/mailman/listinfo/linuxers
*Connection to 74.207.228.67 failed.*
The system returned: *(111) Connection refused*
The remote host or network may be down. Please try the request again.
Your cache administrator is webmaster.
------------------------------
Rahul,
On Tue, Aug 26, 2014 at 12:16 PM, Rahul Mahale
<rahul.mahale123(a)gmail.com> wrote:
>>
>>
>> ---------- Forwarded message ----------
>> From: J T Dsouza <jtd1959(a)gmail.com>
>> To: "GNU/Linux Users Group, Mumbai, India" <linuxers(a)mm.ilug-bom.org.in>
>> Cc:
>> Date: Tue, 26 Aug 2014 11:10:46 +0530
>> Subject: Re: [ILUG-BOM] [Network] Need suggestion
>> On Mon, Aug 25, 2014 at 9:07 PM, Siji Sunny <sijisunny(a)gmail.com> wrote:
>>
>> > > > Hi,
Please mailing list guidelines. In digest mode, you need to change
the subject line to the original discussion that you started.
Reading "Linuxes Digest" in the subject line is meaningless.
-- Arun Khan
Does anyone out here know of any good progress been done on getting the
Firefox OS to run on a Raspberry Pi?
Googling around showed projects which are mostly half baked.
~Mayuresh
Looking to sell off my HP ChromeBook 14 (4GB RAM).
Runs that Linux based ChromeOS from Google. :)
Is less than 2 months old.
Am willing to part with it for INR.20,000/-.
Any takers?
~Mayuresh
The Linux Foundation’s Training Scholarship Program aims to provide funds
to up-and-coming developers and sysadmins who show incredible promise for
helping to shape the future of Linux, but do not otherwise have the ability
to attend Linux Foundation training courses.
http://training.linuxfoundation.org/free-linux-training/linux-training-scho…
--
Siji Sunny
> ---------- Forwarded message ----------
> From: Siji Sunny <sijisunny(a)gmail.com>
> To: "GNU/Linux Users Group, Mumbai, India" <linuxers(a)mm.ilug-bom.org.in>
> Cc:
> Date: Tue, 26 Aug 2014 12:55:00 +0530
> Subject: Re: [ILUG-BOM] [Network] Need suggestion
> > On 26 August 2014 12:31, Siji Sunny <sijisunny(a)gmail.com> wrote:
> >
> > > > On 25 August 2014 19:55, Rahul Mahale <rahul.mahale123(a)gmail.com>
> > wrote:
> > > >
> > > > > Hi,
> > > > > I have a Raspberry Pi running Raspbian, and I have configured it
> as a
> > > > wifi
> > > > > hotspot using Hostapd and dhcp server. Mobile clients connect to
> the
> > > wifi
> > > > > network and browse internet. I need to keep the track of each user,
> > how
> > > > > much internet data it uses, and also need to limit the user to
> > > particular
> > > > > data limit (e.g:1 GB). I need to track data plan, as well how much
> > data
> > > > > used or left for particular user.
> > > > >
> > > > > Which tool or configuration will allow me to achieve this scenario?
> > > > >
> > > > > Thanks in Advance.
> > > > > --
> > > > > *Rahul.R.Mahale.(**http://rahulmahale.wordpress.com/
> > > > > <http://rahulmahale.wordpress.com/>**)*
> > > > > --
> > > > > http://mm.ilug-bom.org.in/mailman/listinfo/linuxers
> > > > >
> > > >
> > > > Dear Rahul,
> > > >
> > > > These systems will require a linux server/router box and little bit
> of
> > > > setup( Sadly, i doubt the Pi has the grunt to run them.), but you can
> > > > satisfy all your requirements and more. Again, it might be worth it
> if
> > > you
> > > > are looking at doing this on an organized basis, but may be too much
> > > effort
> > > > for just personal use.
> > > >
> > >
> > > Squid will work without any issue on ARM platform, so RPi. Only you may
> > > need to compile it from source.
> > > Since the processing capacity of RPi is very low, you may not be able
> to
> > > handle much users/data.
> > >
> > >
> > Siji, i was not taking about basic squid, but rather the ISP grade
> billing
> > systems that i had listed in my mail as not being able to run on the RPi
> > Specificaly(Remember, this is an ARMv6 platform, with very limited
> > resources available, compared to something like the beagelboard black,
> > ARMv7+lots more ram).
> >
>
> This can be managed by Log-Cycle management and pushing data to a cloud
> server periodically. (which we are using ins some of our wifi projects,
> similar to his set-up).
>
>
> >
> > >
> > > http://www.freeside.biz/freeside/
> > > http://www.citrusdb.org/
> > > http://www.amberdms.com/
> > >
> > >
> >
> > Also, the way he described his setup, it looks like he has only minimal
> > storage available(Agreed, my assumption), so he would have to add more
> > flash/SDCard Storage to provide any meaningful caching with squid, else
> > just use squid as a pass through to throttle/account data usage(And dont
> > get me started on the required storage space for the log files for all
> that
> > data usage accounting).
> >
> >
>
>
Are Raspberry Pi B+ system specifications not capable for me to achieve
this scenario with USB Wifi Adapter ?.
I have 8 GB SD card and if needed I can mount USB drive as well.
And is it necessary to compile squid from source rather then installing by
apt-get ?
Also I searched on squid delay pools but did'nt get any exact method to
limit quota ,rest all are to limit bandwidth speed .
will try it practically once i receive my Wifi Adapter.
Also I would like to ask, Is it easily achievable to do with Capative
Portal like fruitywifi or wifidog ?
--
*Rahul.R.Mahale.*
