Long ago there used to be a command line utility called Xconfigurator which
would probe the monitor and other things and write these settings in
This utility was there till RedHat Linux 6. Afterwards it was discontinued.
I have a RedHat Linux system installed (RH 9). If I chanage the monitor, X
doesn't work. because the monitror has to be configured.
Is there any command line utility which can help probe and configure the
I tried searcing for Xconfigurator on the net, but the rpms and srps on
give the errror messsage
"not an rpm package (or package manifest):"
I need either Xconfigurator source code or some other similar utility.
Abhijeet D Mhatre
Today i got Java Desktop System 2003 ...i`m getting an error during
setup saying "An error has occured during Installation"...i checked out
the jds forum and other related sites....but didnt get any help....so
anyone who has used Sun Java Desktop ...pliz help me(btw...Sun java
desktop is based on suse 8.1)...i get the error when loading of YAST2
fails..dunno for wat reasons...but suse 8.1,8.2 and 9.1 worked properly
on my system...i doubt there might be some problem with the cd...pliz
My system specs are:
PIII-1 Ghz,256MB SD ram.Intel 810 MObo (onboard graphics card)
opeining for a php programmer .
miminum 1 year experience.
please write your expected salary and salary received now.
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
I'm still fighting to get a correct Nfs moun= ted root
filesystem. So correct me if I'm wrong when I did the following :< BR>
--> I exported my newly built embedded (hardly,....its 20 M= B in
size) rootfs from my host machine.
--> = This is thus my NFS server. I started portmap, nfs and
--> On my so called target ( I'm just using another i686 PC f= or
trial purposes, before porting it on the actual machine), I started
the = same services.
--> I have only a kernel on my client/target system= with NFS,
Network block Devices and TCP netwroking options enabled.
= --> I'm still using Grub (for obvious reasons) and the entry is
as follo= ws :
= kernel /bzImage-2.4.20 rw root=/dev/nfs
= ; nfsroot=<nfs-server-address>:<path-to-rootfs-on-server>
ip=<client ip>:<server ip>:<gateway ip&= gt;:<subnet
Thats it !!!
See anything wrong?
&g= t;Its a bad idea as you can see, you need to hardcode this into
the kernel = source
>code for the command line (unless you have good boot loade= r,
grub is one, but i
>didnt have success in putting up Grub, the = stages file size are
too big for
>embedded systems ), and somethin= g that is hardcoded is certainly
>But yes it = is a good idea if you have thin clients and that you
know the IP of
&= gt;NFS Server and the path is never going to change. Choice is
Im new to linux and want to access my two fat32 partitions in my redhat 7.2 installed in the same hard drive. My partition tables and fstab contents are mentioned below. Kindly let me know which files to edit to get these partitions mounted in linux, and do i have any options to access linux partitions in win98.
Device start, end, system
/dev/hda1, 1, 487, win95 fat32
/dev/hda2 , 488, 2438, win95 ext'd (lba)
/dev/hda5, 488, 974, win95 fat32
/dev/hda6, 975, 1947, win95 fat32
/dev/hda7, 1948, 1950, linux
/dev/hda8, 1951, 1983, linux swap
/dev/hda9, 1984, 2438, linux
label=/ ,/, ext3, defaults, 1 1
label=/boot, /boot, ext3, defaults,1 2
none, /dev/pts, devpts, gid=5, mode=620",0 0
none ,/proc, proc, defaults,0 0
none, /dev/shm ,tmpfs, defaults,0 0
/dev/hda8 ,swap, swap, defaults,0 0
/dev/fd0, /mnt/floppy, auto , noauto.owner.kudzu,0 0
WholE WorlD is A FamilY
I have started working on linux last 3 months back and i found it very good in terms of operating and security.
My querry is how can i run virtual computers on my single system..
Here is an e.g for what i mean
I have my windows OS and in windows OS i need to install Linux so that i can boot linux in windows and after booting i need to configure a network with linux and windows in the same session. I know that vmware is available but do we have any open source.
(Linux server and windows Clients in single system.)
Namaste Sir ,
I am your Mumbai University PGDIT student . Today i checked mails and came to know that you needed some testers for your college and school CDs . I would like to be one and contribute some thing as much as possible . Sir i do not have a PC at home so it would be helpful to me if you call me on my phone if needed .
Sharma Niwas No. 2 , Room No. 32 ,
Asalfa Pipe Line Road , Ghatkopar(w),
Mumbai - (400084)
Phone No :
Yahoo! India Matrimony: Find your life partneronline.
i am quiet new to the world of open sou= rce community,
actually i was loking for some good books to learn lin= ux, debian
in particular....so guys plz suggest me some books and the place= from
where i can get those...
i am facing two errors
1. when i login
message related to one dir comes like this
"-bash : /root/pr= actice : is a directory"
/root/practice is one of directory in m= y root dir
2. when i issue command
rpm -qa | grep (anyth= ing)samba
then it shows hdc error device interrupt seek etc...
can any one of you please help me
thanks in advance
On Thu, 22 Jul 20= 04 K Ravishekar wrote :
>Vin....Thanks for the tip...Ravi
&g= t;----- Original Message -----
> From: Vinayak Hegde <vinayakh@= gmail.com>
>To: GNU/Linux Users Group, Mumbai, India <linuxe rs(a)mm.ilug-bom.org.in>
>Sent: Thursday, July 22, 2004 5:02 PM
>Subject: Re: [ILUG-BOM]
> > On Thu, 22 Jul 2004 14:54:09 +0530, K Ravishekar
> &= gt; <ravi(a)phoenixsoftnet.com> wrote:
> > > Linuxers...
> > >
> > > Our = Company, is looking for Sys Admins (RHCE) with
1- 1 1/2
>yrs= . of experience and
> > [snip]
> > In case you have= any commercial interest in sending the mail
> > consulting, selling stuff etc. consider
adding the [C= OMMERCIAL] tag
> > in the subject line.
&= gt; > --> Vin
> > --
> > http= ://mm.ilug-bom.org.in/mailman/listinfo/linuxers
>Outgoing mail is certified Virus Free.
>Checked by AVG
anti-virus system (http://www.grisoft.com).
&= gt;Version: 6.0.716 / Virus Database: 472 - Release Date: 7/5/04