Linuxers October 2013

linuxers@mm.ilug-bom.org.in

26 participants
26 discussions

by jalinder jag

thank u all for this wonderful event, learned a lot and enjoyed even more met all this awesome brilliant minds keep it up guys Thank you to all. Jalinder.

9 years, 11 months

Re: [ILUG-BOM] Fwd: [OT/HW] How to unglue AMD Phenom II from it's heat sink?

by gnulinuxist＠gmail.com

Sorry about the blank mail earlier. -----Original Message----- From: Arun Khan Sent: 07/10/2013, 13:00 To: ILUG-Mumbai Subject: [ILUG-BOM] Fwd: [OT/HW] How to unglue AMD Phenom II from it's heat sink? Greetings HW enthusiasts, The motherboard of one of my system is RIP. When I took out the CPU heatsink+fan, it came out with the CPU firmly stuck to the copper!. I have tried to separate the CPU from the heat sink without much success. I am afraid if I try any solution it might damage the CPU. Any suggestion to resolve this 'sticky' issue would be much appreciated. -- Arun Khan -- What about yanking it gently with a broad flat screw driver? Regards, Rony.

9 years, 11 months

Re: [ILUG-BOM] inability to attend

by jitendra

Due to throat infection and some fever, I am unable to attend today's party. More specifically will miss making presentation on Treemapindia Cheers! Sent from BlackBerry® on Airtel

9 years, 11 months

any lispers around?

by Mayuresh Kathe

Hi, are there still any Lispers around on the list (pun intended). ;) ~Mayuresh

9 years, 11 months

ilug-bom : website : any plans?

by Mayuresh Kathe

Hello, are there any plans to create a proper website for ilug-bom? I voluteer (again) to build and maintain the website, just that I would need suggestions and contributions on the content front. ~Mayuresh

9 years, 11 months

Re: [ILUG-BOM] Mumbai LUG meeting and Ubuntu 13.10 Release Party

by Rushabh Mehta

Dear all, If there is time, one of our team would like to present some of the FOSS projects we are working on (15mins) including ERPNext, which has been recently listed as one of the world's best open source applications of 2013 [1] by InfoWorld magazine along with Wordpress and OpenERP. We have also done a couple of side projects including a prototype for Prof Shah of IITB [2] and have also made an open data browser [2] [1] www.infoworld.com/slideshow/119652/bossie-awards-2013-the-best-open-source-… [2] http://treemapper.in [3] http://opendataproject.in best, Rushabh W: https://erpnext.com T: @rushabh_mehta On 15-Oct-2013, at 9:30 PM, linuxers-request(a)mm.ilug-bom.org.in wrote: > Send Linuxers mailing list submissions to > linuxers(a)mm.ilug-bom.org.in > > To subscribe or unsubscribe via the World Wide Web, visit > http://mm.ilug-bom.org.in/mailman/listinfo/linuxers > or, via email, send a message with subject or body 'help' to > linuxers-request(a)mm.ilug-bom.org.in > > You can reach the person managing the list at > linuxers-owner(a)mm.ilug-bom.org.in > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Linuxers digest..." > Today's Topics: > > 1. Re: Mumbai LUG meeting and Ubuntu 13.10 Release Party > (Rigved Rakshit) > 2. Re: Mumbai LUG meeting and Ubuntu 13.10 Release Party > (Rigved Rakshit) > > From: Rigved Rakshit <r.phate(a)gmail.com> > Subject: Re: [ILUG-BOM] Mumbai LUG meeting and Ubuntu 13.10 Release Party > Date: 15 October 2013 7:12:12 PM IST > To: "GNU/Linux Users Group, Mumbai, India" <linuxers(a)mm.ilug-bom.org.in> > Reply-To: "GNU/Linux Users Group, Mumbai, India" <linuxers(a)mm.ilug-bom.org.in> > > >> Yes, I will make a presentation and also offer opportunities for >> participation of FOSSers in TreemapIndia FOSS project of GISE Lab f Comp >> Science deptt, IIT >> I will like 15 minutes of presentation > > Great! > > Best Regards, > Rigved > > > > > From: Rigved Rakshit <r.phate(a)gmail.com> > Subject: Re: [ILUG-BOM] Mumbai LUG meeting and Ubuntu 13.10 Release Party > Date: 15 October 2013 7:19:27 PM IST > To: "GNU/Linux Users Group, Mumbai, India" <linuxers(a)mm.ilug-bom.org.in> > Reply-To: "GNU/Linux Users Group, Mumbai, India" <linuxers(a)mm.ilug-bom.org.in> > > >> I'm trying to register myself on the RSVP page. >> >> On the Login page , after I submit my emai/password I get this: >> >> An attribute required for logging in was not returned (nickname). >> I read elsewhere that I ought to check my personal details I want to share >> before I click 'Log in'., But these items are already checked and grayed >> out as well. > > It seems that some details are not being passed to loco.ubuntu.com. > >> Is there anything I need to do ? Thank You. > > * Go to this URL: https://login.ubuntu.com/ and log in. > * Make sure that all your details are entered correctly. > * Now, in a new tab, go to this URL: > http://loco.ubuntu.com/events/indian-team/2596-ubuntu-1310-release-party-mu… > and try to register for the event. > * Please make sure that you have selected all the personal details > that are available, while logging in. It may be possible that a > personal details is not greyed out, but is still required and is > unselected. > > I hope this helps! Otherwise, just come along to the event and we'll > get your registered there on the spot. > > Best Regards, > Rigved > > > > -- > http://mm.ilug-bom.org.in/mailman/listinfo/linuxers

9 years, 11 months

filesystems

by J T Dsouza

Has anyone used btrfs? so far I have been using jfs which has worked just fine over the past several years. any gottchas to take care of with btrfs.

9 years, 11 months

Fwd: [OT/HW] How to unglue AMD Phenom II from it's heat sink?

by Arun Khan

Greetings HW enthusiasts, The motherboard of one of my system is RIP. When I took out the CPU heatsink+fan, it came out with the CPU firmly stuck to the copper!. I have tried to separate the CPU from the heat sink without much success. I am afraid if I try any solution it might damage the CPU. Any suggestion to resolve this 'sticky' issue would be much appreciated. -- Arun Khan

9 years, 11 months

Digisol DG-BA3370

by J T Dsouza

has anyone got usb_modeswitch to work with this? usb_modeswitch -W -c /etc/usb_modeswitch.d/2077\:f000 Reading config file: /etc/usb_modeswitch.d/2077:f000 * usb_modeswitch: handle USB devices with multiple modes * Version 1.1.4 (C) Josua Dietze 2010 * Based on libusb0 (0.1.12 and above) ! PLEASE REPORT NEW CONFIGURATIONS ! DefaultVendor= not set DefaultProduct= not set TargetVendor= 0x2077 TargetProduct= 0x9000 TargetClass= not set TargetProductList="" DetachStorageOnly=0 HuaweiMode=0 SierraMode=0 SonyMode=0 GCTMode=0 MessageEndpoint= not set MessageContent="5553424308902082000000000000061b000000020000000000000000000000" NeedResponse=0 ResponseEndpoint= not set Interface=0x00 InquireDevice enabled (default) Success check disabled System integration mode disabled usb_set_debug: Setting debugging level to 15 (on) usb_os_find_busses: Found 004 usb_os_find_busses: Found 003 usb_os_find_busses: Found 002 usb_os_find_busses: Found 001 usb_os_find_devices: Found 001 on 004 usb_os_find_devices: Found 001 on 003 usb_os_find_devices: Found 001 on 002 usb_os_find_devices: Found 008 on 001 usb_os_find_devices: Found 001 on 001 error obtaining child information: Inappropriate ioctl for device No default vendor/product ID given. Aborting. root@in1:~# lsusb Bus 001 Device 008: ID 2077:f000

9 years, 11 months

Re: [ILUG-BOM] Fwd: [OT/HW] How to unglue AMD Phenom II from it's heat sink?

by gnulinuxist＠gmail.com

-----Original Message----- From: Arun Khan Sent: 07/10/2013, 13:00 To: ILUG-Mumbai Subject: [ILUG-BOM] Fwd: [OT/HW] How to unglue AMD Phenom II from it's heat sink? Greetings HW enthusiasts, The motherboard of one of my system is RIP. When I took out the CPU heatsink+fan, it came out with the CPU firmly stuck to the copper!. I have tried to separate the CPU from the heat sink without much success. I am afraid if I try any solution it might damage the CPU. Any suggestion to resolve this 'sticky' issue would be much appreciated. -- Arun Khan -- http://mm.ilug-bom.org.in/mailman/listinfo/linuxers

9 years, 12 months

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

Linuxers October 2013