Linuxers

linuxers@mm.ilug-bom.org.in

14152 discussions

Re: Philip/Quasi/Link of articles
by Triptpal Singh Lamba 18 Jul '01

18 Jul '01

Why increase the size of the digest/mails .. Could Philip pls. give us a link instead , unless I am not seeing some point he thought of. btw, neat idea Philip ...pls keep up the good work,helps newbies like me Regards, Triptpal Singh There is no chance, no fate, no destiny that can circumvent, or hinder, or control a firm resolve of a determined soul. ----- Original Message ----- > Message: 1 > Date: Wed, 18 Jul 2001 11:40:53 +0530 > To: <linuxers(a)mm.ilug-bom.org.in> > From: Q u a s i <quasiabhi(a)yahoo.com> > Subject: [ILUG-BOM] Sgtn: Pine Tutorials > Reply-To: linuxers(a)mm.ilug-bom.org.in > > It might be a good Idea to put up the pine tutorials by Philip on the > (G/L)UG site for future reference, wouldn't it? > > quasi > > -- postscript -- > > Math is like love -- a simple idea but it can get complicated. > -- R. Drabek > _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

2 1

Problems with Kernel 2.4
by Paresh Chodpekar 18 Jul '01

18 Jul '01

I am using Suse Linux 7.1, it has two precompiled kernels ie 2.2.18 & 2.4. During the installation I had installed both the kernels. Now I am able to boot correctly using the 2.2.18 kernel. However when i try to boot using the 2.4 kernel i always have some kind of problems. The problem usually arises at the last stage. The system boots correctly and the graphical login is displayed. But after login the system either sys it cannot setup IPC or the xserver crashes & i am returned to the login. The login works correctly in X (so i suppose there is no problen with the xserver). Please do provide a simple answer to my problem. I am still a bigenner with linux. ( I guess there is some probelm in the precompiled kernel. Can i use the 2.4.6 kernel proveided in he last PCQ cd ?) Thanx in advance Paresh C

1 0

L in inlux is not for the Pound Sign
by Anand 18 Jul '01

18 Jul '01

Hello mayuresh, I believe you are asking the wrong question at the wong place. This is not M$ world. The software is given for fukat(free) and the support is only charged. the user has a right to modify the original program and redistribute it. This is linux. please do not change the L to Pound sign. Anand Original message from mayuresh follows.... how do s/w vendors ensure that a customer who buys a CD can use it to install the s/w only on his computer and if he takes a CD dump, the second CD will be of no use to anybody else? i guess there must be many techniques to do that but which one is used frequently? thanks a lot.. mayuresh kulkarni

2 1

Free Software & Open Source Software
by sandeep 18 Jul '01

18 Jul '01

Free Software: Here's part o' my paper that I will publish soon that might help clear up the "issue" some people have with the "freedom" that GPL provides : start-------------------------------------------- excerpt from "Copyleft Sucks" by Sandeep Copyright (C) 2001 Sandeep, Verbatim copying and distribution of this entire article is permitted in any medium, provided the copyright notice and this notice are preserved. --snip-- Freedom to me is the ability to make choices and to carry them out, but in a social environment, freedom requires a legal and institutional framework. Here is the paradox, on the one hand for a person to have complete freedom, he must be able to make choices and carry them out without being controlled by anyone else, but on the other hand, in a social setting, one persons choices affect another and hence, in a free society, we need laws to distribute the condition of freedom equally among all the people. Therefore, from a legal point of view, people are free if society imposes no unjust limits on them and also protects their rights. That is, the law both limits and protects the freedom of an individual. For example, it forbids people to steal from others, but it also guarantees that people will be free from being robbed. --snip-- end--------------------------------------------- This is exaclty how the GNU GPL functions. It is not totally free of constraints but these restrictions r very nessecary -they limit but only to protect. Sandeep --- "The only freedom which deserves the name is that of pursuing our own good, in our own way, so long as we do not attempt to deprive others of theirs, or impede their efforts to obtain it." ---John Stuart Mill ___________________________________________________________________ *FREE* Web-based Email Accounts at BOX.COM - http://www.box.com/?i=2 Access Your Email from ANYWHERE!

1 0

Sgtn: Pine Tutorials
by Q u a s i 18 Jul '01

18 Jul '01

It might be a good Idea to put up the pine tutorials by Philip on the (G/L)UG site for future reference, wouldn't it? quasi -- postscript -- Math is like love -- a simple idea but it can get complicated. -- R. Drabek __________________________________________________ \?/ .Quasi. (0-0) ( | ) <quasiabhi(a)yahoo.com> ( v ) yahoo messenger : quasiabhi __| |__ / \ Protect OUR Earth.

2 1

Pine - III
by Philip S Tellis 18 Jul '01

18 Jul '01

Making effective use of Pine - III ================================== In the last issue, we learnt how to use our address books to best effect. There's much more that you can do with your address book. You should experiment with the different menu options available in the address book screen. Use Ctrl+G for help on any screen. Even the help screen. Just for safety, you'd probably want to back up your address book before you fool around with options. I don't think you'd mess anything up, but even so, your address book is stored as two files in your home directory, aptly named .addressbook and .addressbook.lu, the latter being an index of your address book. Today, we'll look at the different configuration options, and set some of them to make the most out of pine. You'll have to get to the configuration screen for this. I think you know how. The first thing I generally do, is set the default-fcc to a blank value. I do this because I don't like to save sent mail. This is really a personal decision, so I'll let you make it. You could change the value if you want. Alternately, you could set a different sent-mail folder for each person that you send mail to. We saw this in the address book. We next go down to Composer Preferences. It makes sense to turn on search and replace. This is disabled by default, because it would only confuse novice users. This option changes the behaviour of the Ctrl+W key in compose mode from search, to search and replace. You should probab try a search and replace right now, just to see how it works. I'm not going to tell you. The next option I enable is sigdashes. Sigdashes are a special character sequence used to separate the mail from its signature. The sequence is "\n-- \n" without the quotes. For those of you who aren't programmers, this means the enter key, followed by two dashes, followed by a space, followed by the enter key again. I guess the big question on everybody's mind right now is, "Why do we need a fixed sequence for something as insignificant as this? Why can't everyone just decide how to do it on their own?". Valid questions, and here's the valid answer. Standards are good. By using a standard separator, mail clients can easily separate the body from the signature without the user's intervention. With sigdashes enabled, if you include the original message in your replies, pine will automatically strip everything from the sigdashes onwards. The advantage of this, is that your mail doesn't get cluttered with everyone else's signatures. The disadvantage, which should be obvious now is, what if one really wants to include the other person's signature? I think that is easily accomplished through copy-paste. The second thing that sigdashes does, is automatically include the sigdashes before your signature in all outgoing mail. This of course happens only if you have a signature. The next option I enable is quell-dead-letter-on-cancel. If you've ever cancelled a mail, you'll notice that it saves the cancelled mail as a file called dead-letter in your home directory. Often, this file is saved with permissions depending on your default umask (don't worry if you don't know what that means). If you have a non-restrictive umask, this could be saved with world readable permissions, which means anyone can read mail you've cancelled. Besides, it takes up disk space. Quelling it means that dead.letter won't be saved. The advantage is that you don't have to delete it everytime you quit pine. Next, we come to Reply Preferences. The only option that you really want to enable is signature-at-bottom. All this does, is to put your signature right at the bottom of the mail, even if you include the original message in your reply. The option after that - strip-from-sigdashes-on-reply basically does the first part of enable-sigdashes without doing the second. This only applies if you didn't select enable-sigdashes. In Sending Preferences, the only option I have is use-sender-not-x-sender. This makes your mail more standards compliant, but has little effect on anything else. You'll notice its positive effects only in rare cases, but I recommend turning it on anyway. The next block is where pine really shines above all other mail user agents. Folder preferences along with a few features give you amazing power to categorise your mails. The first two options go hand in hand. Combined-folder-display affects how folders show up in the folder list screen. By default, only collections are shown (eg: incoming folders, mail folders, newsgroups). Selecting one of these collections will show you all folders in that collection. If this is what you do everytime, you may want to enable it by default. The previous option, combined-subdirectory-display affects how subdirectories in folders are displayed. By default, they show up in a separate screen. Enabling this feature will allow them to show up in the same screen as all your other folders. The only problem you'll face with these options is that if your folder list exceeds one screenful, pine will take a few seconds to format the scrolling display. That's not too much of an issue for most people. We will also enable expanded-view-of-folders here. By default, pine will only expand one collection at a time. To have all your collections expanded, select this option. It allows you to see all your folders at a single glance. Finally, to avoid unnecessary clutter, we'll enable quell-empty-directories. This causes empty directorie to be hidden from the folder list. It doesn't delete the directory, but merely hides it from view. The last option I enable here is enable-incoming-folders. This is sort of an advanced option, and I'll deal with it later when we do incoming folders. We probably won't need to change address book settings, except maybe setting an expanded-view-of-distribution-lists. This will show us all addresses under the distribution list instead of just the name. The problem here is that it may take ages to actually scroll through your entire address book. In Message Index Preferences, I only have delete-skips-deleted enabled. This saves me the time of moving past deleted messages in the index, by jumping over a whole group of deleted messages at a time. When you try it, you'll know what I mean. In viewer preferences, I have almost all options enabled. Attachments, urls, web-hostnames and addresses. The first allows one to click (or press enter) on an attachment, and have that attachment shown in its default viewer. The second does that with urls (even in plain text email), and the third with web hostnames. Pine figures that anything starting with "www." is a web hostname, so you could get false hits with this. Addresses is for email addresses, or more correctly, anything with an @ in it. Selecting this item will send mail to the specified address. Pine by default doesn't handle anything other than email (and news), but it lets you specify any kind of viewer that you may want for each mime type. We'll see how to do this later. I would normally have enabled prefer-plain-text, but due to the proliferation of html mail these days, I chose not to. Most of the remaining commands in pine are advanced, so we'll handle them in a later section. For now, experiment with everything we've done today. Try enabling and disabling different features to see how it makes a difference. Read help on each of the features that you've changed. -- Economists state their GNP growth projections to the nearest tenth of a percentage point to prove they have a sense of humor. -- Edgar R. Fiedler Visit my webpage at http://www.ncst.ernet.in/~philip/ Read my writings at http://www.ncst.ernet.in/~philip/writings/ MSN philiptellis Yahoo! philiptellis

1 0

Re:Re: [ILUG-BOM] Help Me
by Paresh Chopdekar 18 Jul '01

18 Jul '01

On Jul 12 Kinjal Sonpal wrote, >As mentioned in my earlier mail,u have to download the >driver >file from the motorola's site .. >Here's the URL: >http://e->www.motorola.com/products/softmodem/support/sm56_5.1_i38 >6.rpm > >And before downloading, don't forget to read the docs >that >they've put up on the above mentioned link's parent >page which is > >http://e->www.motorola.com/products/softmodem/support/software.htm >l > >So,after u download the RPM file install the file using >(Log in >as root) > >$ rpm -Uvh sm56.rpm (Replace sm56.rpm with >whichever file u've >downloaded) >$ /usr/local/sm56 >$ reboot (I'm not very sure why we need reboot,but it >din't work >for me .. I had to reboot) > >They've also got a man page for the modem which u can >read by >typing > >$ man sm56 > >And voila! yr SM56 Internal modem is ready !! >As of now I'm using SuSE 7.1(Thanks to Navin for >giving me the >CDs) and the above mentioned procedure worked for >me .. >However it failed in Caldera OpenLinux 2.3 .. May be >the older >kernel was the problem .. First of all thanks for the soulution to my problem. But I would like to ask what kernel vewrsion are you using? I tried to use the 2.4 version but found it very problematic. Is the 2.4 version shipped with Suse Linux 7.1 good enough for you? I actually went back to use the 2.2.18 kernal. About the driver from the motorola site i tried it out. It looks good, but does it work with 2.2.18 kernel? And about the Roltanet connection , >Is there anyone one the lug who is using RoltaNet's >dialup net >services? I've been facing problems in connecting to the >RoltaNet >.. >The logs say that I can connect to their server but then >while >logging on to the network, the connection hangs ,, And it >even >blocks my internal modem,i.e. I can't even kill the >connection .. >If anyone was successful in setting up dialup connection >to the >RoltaNet then please help me .. >Connection to the VSNL dialup connection is absolutely >fine and >to my surprise it's much faster than what I used to get >with >Windows !! I use Roltanet in windows, but due to my modem not yet working in linux i have not been able to connect in linux. Please do tell me how you did it in linux? And about the speed differences in win & lin it may well be due to better implementation of the TCP/IP in linux than in Windows. Bye for now

9 10

Newbie needs help
by Deepak Kashyap 18 Jul '01

18 Jul '01

Hi everyone I have installed linux from PCQ CD it's based on redhat 7.1 Now my problem When I start my netscape prowser on linux box It is unable to open the localhost whose domainname is loaclhost.localdomain I am able to http:// to my win machine running PWS but not telnet http:// or ftp to linux box How do I do this.. Do I need to install samba. Thanking you Deepak _____________________________________________________________ Get your own OYE ID at http://www.oye91.com

4 3

Re: [ILUG-BOM] Newbie needs help
by Amish Mehta 18 Jul '01

18 Jul '01

Hello, >When I start my netscape prowser on linux box It is unable to open the localhost whose domainname is loaclhost.localdomain > >I am able to http:// to my win machine running PWS but not telnet http:// or ftp to linux box I guess you are talking about http://localhost or http://127.0.0.1. > >How do I do this.. You need to have apache web server(httpd) running your machine. You can do it by using linuxconf and/or ntsysv. Where you can enable wu-ftpd, telnet too for ftp access to linux box. Tip: You might want to use ssh instead of telnet. > >Do I need to install samba. I dont think you need samba atleast for this. Amish.

1 0

RMS Lecture!!! (OT)
by Kompalli SuryaPrakash 18 Jul '01

18 Jul '01

Hi There, The lecture today was really nice!!! We Luggers missed Nagarjun and Philip - It was a very nice and successful effort on part of all the organisers. Bye, SP Pls. note: - My Email ID has changed from ksuryap1(a)yahoo.com to neosurya(a)yahoo.com --- Outgoing mail is certified Virus Free.Using AVG antivirus Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.264 / Virus Database: 136 - Release Date: 7/2/01 _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

2 1

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

Linuxers