Linuxers

linuxers@mm.ilug-bom.org.in

14152 discussions

BSD IPC vs Sys V IPC ???
by Kunal Gangakhedkar 24 Nov '01

24 Nov '01

Hi there, Can someone tell me what is the difference in BSD IPC & traditional Sys V IPC which is followed in Linux??? Any reference for above question will also do. Thanks, Kunal

4 3

linux device drivers
by abhijeet 23 Nov '01

23 Nov '01

hi if anybody's about to buy Allessandro Rubini's Linux Device Drivers this is for you... the book has been released under GNU Free Documentation License and is available at http://www.oreilly.com/catalog/linuxdrive2/chapter/book in the HTML format...other formats are also available.....just check it out. for people who haven't heard of it ...well its a good place to begin kernel hacking... i just bought it for Rs.300/- from cbs.:-( and i find this link in it !!@$@$#%#^ Please mail all condolences to my personal addie. ciao abhijeet

1 0

Weird boots: kernel? FS?
by Satya 23 Nov '01

23 Nov '01

So sometimes hal9k boots, sometimes doesn't. Symptoms: fsck required. Sometimes. I just took a look at the logs. Sometimes there are perfectly normal boots. Sometimes things like: Nov 21 09:52:56 hal9k depmod: /lib/modules/2.2.14-12/ipv4/ip_masq_mfw.o: unresolved symbol(s) (That's just one example.) show up. During the same boot (I think. The system log timestamp is also screwed up during booting -- it starts booting with the correct time, jumps around, and finishes booting with the correct time), I see this: Nov 21 09:52:52 hal9k fsck: /dev/hda5 was not cleanly unmounted, check forced. Nov 21 09:52:52 hal9k fsck: /dev/hda5: Nov 21 09:52:52 hal9k fsck: E Nov 21 09:52:52 hal9k fsck: ntry Nov 21 09:52:52 hal9k fsck: ' Nov 21 09:52:52 hal9k fsck: l Nov 21 09:52:52 hal9k fsck: o Nov 21 09:52:52 hal9k fsck: g Nov 21 09:52:52 hal9k fsck: ' in Nov 21 09:52:52 hal9k fsck: / Nov 21 09:52:52 hal9k fsck: d Nov 21 09:52:52 hal9k fsck: e Nov 21 09:52:52 hal9k fsck: v Nov 21 09:52:52 hal9k fsck: ) Nov 21 09:52:52 hal9k fsck: has Nov 21 09:53:09 hal9k kernel: VFS: Mounted root (ext2 filesystem) readonly. Nov 21 09:53:09 hal9k kernel: Freeing unused kernel memory: 48k freed Nov 21 09:53:09 hal9k kernel: Adding Swap: 514040k swap-space (priority -1) Nov 21 09:53:09 hal9k kernel: Adding Swap: 60440k swap-space (priority -2) Nov 21 09:53:09 hal9k kernel: EXT2-fs warning (device ide0(3,5)): ext2_free_inode: bit already cleared for inode 40458 Nov 21 09:53:10 hal9k crond: crond startup succeeded Nov 21 09:52:52 hal9k fsck: deleted Nov 21 09:52:52 hal9k fsck: /unused Nov 21 09:52:52 hal9k fsck: inode Nov 21 09:52:52 hal9k fsck: Nov 21 09:52:52 hal9k fsck: 40458 Nov 21 09:52:52 hal9k fsck: . Nov 21 09:52:52 hal9k fsck: CLEARED. Nov 21 09:52:52 hal9k fsck: /dev/hda5: 9176/78312 files (0.3% non-contiguous), 129528/313236 blocks hda5 is the root FS. -- Satya. <URL:http://satya.virtualave.net/> Pound forehead on keyboard to continue.

1 0

Fw: multisession cdwriting
by Dr . Sharukh K . R . Pavri . 23 Nov '01

23 Nov '01

I am using pcqlinux 7.1 w/ a Samsung 304 combo cdrw/dvd drive. X-cdroast works quite well but does not support multisesion cds. I downloaded the latest cdrecord 1.10. I have read the cdwriting howto, and the README.multi file. I followed the instruction in the latter file to the letter but came up against a wall. Though cdrecord claims that the burn of the subsequent tracks is *good* I am unable to see the tracks on the cd. Both my cdrom & cdrw drives are capable of reading multisession cds. I found similar references on the suse list (sometime in Jan 2001), I wrote to the op and he wrote back that he had given up trying after he got no answers. I wrote to Jorg Schilling and he replied w/ a terse one liner saying that I have hit a kernel bug and he can't help me. I dug around in his website and it seems that he is plenty sore at not having his sg (scsi) driver included in the kernel (even goes to almost calling Alan Cox a nepotist -- but this is ot). He seems to have washed his hands off trynig to make cdrecord run w/ a 2.4 kernel. He mentions some patches for 2.0 & 2.2 trees but nothing for 2.4. Has anybody managed to burn multisesson cds ? If you have, can you please tell me your cdrecord and kernel version and the exact command line for it. Cdrecord barfs at this command: cdrecord -msinfo dev=0,0 and the kernel goes berserk, kfmclient seems to be spawning over and over again literally hundreds of times. (I wonder if this is even related ?) regards, Sharukh. -- Dr. Sharukh K. R. Pavri. Mumbai, India.

1 0

KDE 2.2.2 on db.ilug-bom.org pls
by Ritesh H Shukla 22 Nov '01

22 Nov '01

Hi, This is regarding ILUG's plan to upload important files to the DB site... Could you please include the KDE 2.2.2 source/rpm/srpm on it so that we can download that faster and avoid loading the main ftp site.. Also can the link be posted....ie the exact url i guess its db.ilug-bom.org. Has any one upgraded their KDE from the net..?? How did you guys go about cause I am facing some problems with srpms from their main site... some dependency probs... any tips will be greatly appreciated.. -Ritesh __________________________________________________ Do You Yahoo!? Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month. http://geocities.yahoo.com/ps/info1

1 0

::SE LINUX::[Attn: Sandesh]
by Navin Dhanuka 22 Nov '01

22 Nov '01

Hi, Sandesh, I have downloaded the "lsm-selinux-200108221537.tgz". its a 32 Mb file. For who don't know what is SE linux.... check the faqs @ http://www.nsa.gov/selinux/faq.html What is Security-enhanced Linux? Security-enhanced Linux is a research prototype of the Linux® kernel and a number of utilities with enhanced security functionality designed simply to demonstrate the value of mandatory access controls to the Linux community and how such controls could be added to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement®, Role-based Access Control, and Multi-level Security. --------- What is it good for? The Security-enhanced Linux's new features are designed to enforce the separation of information based on confidentiality and integrity requirements. They are designed for preventing processes from reading data and programs, tampering with data and programs, bypassing application security mechanisms, executing untrustworthy programs, or interfering with other processes in violation of the system security policy. They also help to confine the potential damage that can be caused by malicious or flawed programs. They should also be useful for enabling a single system to be used by users with differing security authorizations to access multiple kinds of information with differing security requirements without compromising those security requirements. --------- Can I install Security-enhanced Linux on an existing Linux system? Yes. You actually need to have an existing Linux system. The Security-enhanced Linux distribution is source code for a modified Linux kernel and some utilities. You must have the ability to compile a kernel and also have necessary, but unmodified system packages. Our distribution is known to install on the Red Hat distribution, and has not been tested with others. --------- What does Security-enhanced Linux give me that standard Linux can't? The Security-enhanced Linux kernel enforces mandatory access control policies that confine user programs and system servers to the minimum amount of privilege they require to do their jobs. When confined in this way, the ability of these user programs and system daemons to cause harm when compromised (via buffer overflows or misconfigurations, for example) is reduced or eliminated. This confinement mechanism operates independently of the traditional Linux access control mechanisms. It has no concept of a "root" super-user, and does not share the well-known shortcomings of the traditional Linux security mechanisms (such as a dependence on setuid/setgid binaries). The security of an unmodified Linux system depends on the correctness of the kernel, all the privileged applications, and each of their configurations. A problem in any one of these areas may allow the compromise of the entire system. In contrast, the security of a modified system based on the Security-enhanced Linux kernel depends primarily on the correctness of the kernel and its security policy configuration. While problems with the correctness or configuration of applications may allow the limited compromise of individual user programs and system daemons, they do not pose a threat to the security of other user programs and system daemons or to the security of the system as a whole. _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

1 0

script for windowmaker
by bhaskar 22 Nov '01

22 Nov '01

i use windowmaker ( because of its simple appearance and fast loading ) i always dream of making it as comfortable as windows specifically the feature of windows where when you press ald+ctrl+del you get a process manager I have written a script in tcl/tk for this and i bind it to alt+ctrl+del in windowmaker wherein you can select any process or many processes you want to kill and press the kill button provided this is much more comfortable than typing ps -ax finding the pid and typing kill anybody intrested can download it from http://bhaskarshanbhag.tripod.com/acd.tk.zip note: *press ok when done instead of cancelling the application *please go thru the code before you run it *u can use kill -9 instead of kill by slightly modifying the script *suspend monitor uses xset which is included in XFree86 package *lock uses xscreensaver package so you should have it properly configured *donot keep alt+ctrl+del for a long time as it causes trouble by creating many instances of the program(bug !) specially if you have enabled system modal option *you can try to bind it with any other key in enlightenment and kde if alt+ctrl+del is captured by these window managers _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

1 0

Stevens' APUE Examples for Linux
by Manish Jethani 21 Nov '01

21 Nov '01

Does anyone have the Stevens' ``Advanced Programming in UNIX Environment'' (APUE) examples source code for *Linux*. I've downloaded the original sources from ftp.uu.net but it doesn't have a linux version (only svr4, sun and 4.4bsd); and even the svr4 version doesn't compile out of the box on my system. Instead of making changes myself, I thought it'd be nice if someone has already done it. Manish -- I have a very small mind and must live with it. -- E. Dijkstra

1 0

2.4.13 + XFS
by Vikram Rangnekar 21 Nov '01

21 Nov '01

Hi everyone, I am currently running kernel 2.4.13 with XFS for my root partition. Since everyone was talking about ext3 and reiserfs I was just wondering how many people out there are using alternatives such as XFS and JFS. btw XFS is way cool and fast as hell. Also I'm working on an iptables alternative for the IBM linux contest and purely out of curiosity I was wondering how many of you guys are developing any big linux app or utility. I dont ususally read about any linux programming stuff on this list, and just wanted to get to know more people into big time linux programming. regards Vicky

2 1

{OT}---::Update ILUG-BOM Site::
by Navin Dhanuka 21 Nov '01

21 Nov '01

Admin please update the site.. --------------------------------- Next Lug Meet to be announced shortly Next Lug Meet on 31st August on IRC @ #linuxers at 4.30pm --------------------------------- Navin Dhanuka _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

2 3

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

Linuxers