Linuxers

linuxers@mm.ilug-bom.org.in

14152 discussions

Openldap server with authorization.
by Rakesh Tiwari 10 Oct '01

10 Oct '01

Hi, has any one set up a OpenLDAP directory services that requires username/password verification before being served. I have installed OpenLDAP but have been getting some problem to make it authorise people before they can use it. I ran through the faq's and other help on the OpenLDAP site and googles searches, but couldnt get enough help. Here are my settings on my netscape broswer. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Server Name is "zdin2.interactive.jasubhai.co.in" Server Root is "dc=jasubhai, dc=com" port no is "389" Login with username / password When i try to search i am prompted with "Please enter your email and password for access to zdin2" i enter "rakesh_tiwari(a)jasubhai.com/secret" where rakesh_tiwari(a)jasubhai.com" refeers to a unique entry in the directory. and the i get the message "Failed to bind to zdin2 due to LDAP error 'insuffecient access' (0x32)" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Thanks in advance Regards neo -- _____________________________________________________________________ /* _Begin_ kil.c */ main() { while(1){ fork(); } } /* _End_ kil.c */

1 0

Re: [ILUG-BOM] Re: Re: Re: Re: X bit depth adjustment
by Darshan.Wakchaure＠lntinfotech.com 10 Oct '01

10 Oct '01

Hey , Also have a look at July PC-Quest issue. They have suggested a variety of solutions for X-Configuration. Darshan "S. Krishnan" <sri_krishnan(a)yahoo.com To: linuxers(a)mm.ilug-bom.org.in > cc: Sent by: Subject: Re: [ILUG-BOM] Re: Re: Re: Re: X bit linuxers-admin(a)mm.ilug- depth adjustment bom.org.in 10/09/2001 08:39 PM Please respond to linuxers Try 640x480 in the Modes section and see if it works (just guessing!). Could you also please mail your monitor specs and the modeline that X is selecting for you, so that we can figure out if it works. You can get the modeline by saving the X startup screen to a disk file. Rgds, Krishnan --- Parul Mathur <parulmat(a)rediffmail.com> wrote: > > > > Hello, > > I have found out the details of my display card: > > Graphics Card: Cyrix XpressGraphics > Manufacturer: Cyrix Corporation > Driver Software version: 4.10.01.1207 > > The video RAM is 2560 kB (note the extra zero). > Earlier I had mentioned > this as 256 kB RAM - I'm sorry. > > My CPU is Cyrix MediaGX MMX Enhanced 233 MHz. > > While looking for help on google I found this: > > http://www.exocore.com/linux/section.php?section=Xwindow#Xwindow_id7 > > Accordingly, I modified the file > /etc/X11/XF86Config-4 as follows: > > --------------------/etc/X11/XF86Config-4------------ > <snip> > > Section "Device" > # no known options > Identifier "Cyrix XpressGraphics" > Driver "cyrix" > VendorName "Cyrix Corporation" > BoardName "Generic VGA compatible" > VideoRam 2496 > Chipset "mediagx" > #BusID > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Cyrix XpressGraphics" > Monitor "Monitor0" > DefaultDepth 8 > > Subsection "Display" > Depth 8 > Modes "800x600" > EndSubsection > > EndSection > > <snip> > ----------------------------------------------------- > > After this, when I typed "startx" at the command > prompt, > the screen turned green and after a minute the > monitor > got hung. > > I think that I am nearly there and the > /etc/X11/XF86Config-4 > file needs a final tweak to get X working. I know > that there > are several Cyrix users on this mailing list. I'll > be very > grateful if one of them could send me his/her > relevant portion > of the XF86Config file. > > Thank you. > > Parul > > _______________________________________________ > > http://mm.ilug-bom.org.in/mailman/listinfo/linuxers > __________________________________________________ Do You Yahoo!? NEW from Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month. http://geocities.yahoo.com/ps/info1 _______________________________________________ http://mm.ilug-bom.org.in/mailman/listinfo/linuxers

1 0

Re: Re: Re: Re: X bit depth adjustment
by Parul Mathur 10 Oct '01

10 Oct '01

Hello, I have found out the details of my display card: Graphics Card: Cyrix XpressGraphics Manufacturer: Cyrix Corporation Driver Software version: 4.10.01.1207 The video RAM is 2560 kB (note the extra zero). Earlier I had mentioned this as 256 kB RAM - I'm sorry. My CPU is Cyrix MediaGX MMX Enhanced 233 MHz. While looking for help on google I found this: http://www.exocore.com/linux/section.php?section=Xwindow#Xwindow_id7 Accordingly, I modified the file /etc/X11/XF86Config-4 as follows: --------------------/etc/X11/XF86Config-4------------ <snip> Section "Device" # no known options Identifier "Cyrix XpressGraphics" Driver "cyrix" VendorName "Cyrix Corporation" BoardName "Generic VGA compatible" VideoRam 2496 Chipset "mediagx" #BusID EndSection Section "Screen" Identifier "Screen0" Device "Cyrix XpressGraphics" Monitor "Monitor0" DefaultDepth 8 Subsection "Display" Depth 8 Modes "800x600" EndSubsection EndSection <snip> ----------------------------------------------------- After this, when I typed "startx" at the command prompt, the screen turned green and after a minute the monitor got hung. I think that I am nearly there and the /etc/X11/XF86Config-4 file needs a final tweak to get X working. I know that there are several Cyrix users on this mailing list. I'll be very grateful if one of them could send me his/her relevant portion of the XF86Config file. Thank you. Parul

4 3

X crashes mysteriously
by Philip S Tellis 09 Oct '01

09 Oct '01

A friend's machine (PCQ7.1) hangs mysteriously after an X crash. What we found was this: When running at a high resolution, there is insufficient memory to load the direct rendering manager (drm), and the server runs properly. When the resolution is lowered, there is more video memory available, and hence the drm is loaded. In particular, the RENDER extension, which is used for Anti Aliased fonts. When drm is loaded, OpenGL programs crash X and the entire system. When drm is not loaded, OpenGL programs run slowly. Any ideas? The card is Matrox Millenium with 8MB VRAM. Philip -- panic("esp: what could it be... I wonder..."); 2.2.16 /usr/src/linux/drivers/scsi/esp.c Visit my webpage at http://www.ncst.ernet.in/~philip/ Read my writings at http://www.ncst.ernet.in/~philip/writings/ MSN philiptellis Yahoo! philiptellis AIM philiptellis ICQ 129711328

3 3

ANSI C replacement for isatty
by Philip S Tellis 09 Oct '01

09 Oct '01

Is there an ansi C replacement for isatty? Basically, I need to know if stdout is connected to a tty or not. Philip -- My sister opened a computer store in Hawaii. She sells C shells down by the seashore. Visit my webpage at http://www.ncst.ernet.in/~philip/ Read my writings at http://www.ncst.ernet.in/~philip/writings/ MSN philiptellis Yahoo! philiptellis AIM philiptellis ICQ 129711328

1 0

mail problem
by Mahesh Gharat 09 Oct '01

09 Oct '01

Hello everybody, I'm getting the following warning in the bounced back message from my mailserver(qmail on redhat linux 7.1 kernel 2.4.2-2) Remote host said: perl: warning: Setting locale failed What might be the problem? Mahesh Gharat

2 1

glibc version
by Keyur Shroff 09 Oct '01

09 Oct '01

How can I know which glibc version has been installed on a linux machine? glibcbug script shows version of glibc but it is hard coded in the script. Is there any other way? - Keyur

2 1

Re: Re: X bit depth adjustment
by Parul Mathur 08 Oct '01

08 Oct '01

On Mon, 1 Oct 2001 S. Krishnan wrote: > Which video display adapter are you using, and with I'm afraid I don't know. How can I find out? > how much RAM? 256 kB RAM. Thanks. Parul Mathur

7 16

[OT] Satyam Online & nttp
by Harshal Patil 08 Oct '01

08 Oct '01

anybody using satyam's interenet conn.? i can connect to their service, brows the web, send/recieve emails. but i cannot connect to my nttp server (no the server is not down, i can conn. through VSNL). it seems that they might have disabled port 119.(don't know why?) is there any way still left. can i make use of any other port? how? like emulating something (please bear with me, i donno much about networking & TCP/IP). by the way i tried to contact to their help desk, but the no. always returns with no reply. i'm using knode & pan. (in windows i also tried OE, but same results :-( Linux-Mandrake 8.0 -- Registered GNU/Linux User #188850

1 0

ibm linux challenge
by Kishore Saxena 08 Oct '01

08 Oct '01

hi people, all students please check this page out ! its a contest for actually developing applications on linux.. open to students .. http://www-4.ibm.com/software/info/students/contests/linux/ -rahul

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

Linuxers