HI Navin,
Or wat you can do is ... instead of all the procedure described by Krishnan.. its a Redhat so it has some thing called Interactive mode .. so while it switched to interactive mode press I and say no to bring up the network and u can skip that step..:)
-Mitul Limbani (mitul 2 mitul.com)
S. Krishnan writes:
- First try "linux single" at the LILO prompt to drop
into a single user shell. This should generally work and give you access to the system so that you can remove the offending driver.
- Else use a boot/ rescue disk combo to boot the
system, mount the hard disks and proceed from there.
- If all else fails, let the machine wait on the
"Bringing up eth0" prompt - the driver load routine should time out after some time and continue with the boot, since Linux generally doesn't hang eternally unlike some pricey OS'es that we all know about.
HTH,
Krishnan
--- Navin chakko@caltiger.com wrote:
i have RH7.1 installed on my box, recently i tried out a lan card on win. when i tried booting into linux, the startup stalled at "Bringing up eth0" and wont go further. any ideas on how to get to the login prompt without it trying to bring up eth0 Navin
Next Lug Meet on 17th August on IRC @ #linuxers Linuxers mailing list
Linuxers@mm.ilug-bom.org.in
Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ _______________________________________________ Next Lug Meet on 17th August on IRC @ #linuxers Linuxers mailing list
Linuxers@mm.ilug-bom.org.in