Hello,
Sorry for top posting, my phone doesn't allow me to start writing from below.
Anyway, I think as you said, its a MoDem and they understand AT command set and send data only when they get connected on the remote end.
In your case you need some external application like Asterisk and also external hardware (which is not just a Voice Modem) which can send voice traffic using standard telephone signaling (like Ground Start or Loop Start)
Modem's cant do any of the above activity, however I have a device which can take one line input (std telephone line from mtnl) and shows that as telephone FXO line to Asterisk.
Please contact me off the list to know the pricing and working of the same,
Regards, Mitul Limbani Chief Asterisk Trainer & Founder, Enterux Solutions www.enterux.com +919820332422
"H.S.Rai" hardeep.rai@gmail.com wrote:
I wanted to dial telephone number (not using any Internet, just telephone network) and if possible attending phone through PC.
I have "conexant RD02 D400" [having only one port to connect phone cable, and not second port to connect phone instrument], which is connected to PC through USB port. I was able to use following command:
modem-cmd /dev/ttyACM0 ATDP123456
which rings bell on dialed number.
On picking remote phone, I expected that speaker and phone will be used to communicate, but that did not happened.
Is it possible to use PC's mic, speaker or head set attached to PC? If yes, which software or what setting?
-- H.S.Rai -- http://mm.glug-bom.org/mailman/listinfo/linuxers