And ironically this modem uses a linux kernel and other gnu stuff in the firmware. Try teleneting into it.
rgds jtd
On Tuesday 22 March 2005 15:22, Arun Khan wrote:
On Tue, 22 Mar 2005 10:06:33 +0500, sherlock@vsnl.com sherlock@vsnl.com wrote:
On Monday 21 March 2005 22:12, Derwyn Dpenha wrote:
- What model of modem
- what make (quite often the model num is mangled by the
importer) 3) does it connect to the pc via the Ethernet / serial /usb port
Also google. Here is what i found. http://www.desktoplinux.com/articles/AT7909082870.html
The modem driver in suse is DSL-502 Has anyone suceeded in doing this MTNL/Tri band connection on Linux.... If no has anyone spoken to MTNL as to how to get this connection up on linux... The stupid linesmen have no idea at all.....
Nobody in MTNL (or the other ISPs) will have a clue when you say Linux. They will tell u point blank that it wont work, which is total rubbish. I rolled over laughing when the tataindicom zombie wanted to know "yes, but which version of windows linux" to which i replied "linux 2005" and he says "sorry sir we only support windows 2000, we have not yet installed windows linux 2005"
rgds jtd
After my original posting on this topic, I have been talking to the DLink tech support as well as their distributor in Mumbai. From what I have gathered, the 502T has 2 ports 1) a RJ11 DSL connection and 2) a RJ45 (ethernet) port to hook up to a PC or a Hub/Switch. For this kind of a setup I don't think any special drivers are needed (in the PC) to connect to the 502T. Worst case scenario, you may need a cross over cable if you are connecting the unit directly to a PC but then again many devices auto detect straight/cross over cable and internall adjust the wire pairs.
HTH, Arun Khan