On Tuesday 02 August 2005 08:17, Sujeet Bhatt wrote:
Can you tell me how linc-daemon works exactly? I have never used it.
Thanks in advance,
Sujeet
Dejavu :P. It seems just yesterday that Philip Tellis was tutoring me on how to use linc-daemon. I didnt thank him for his wonderful post. Anyway, its better to be late than never. Thanks Philip :)
Here is his original post:
On Wed Feb 18 17:04:30 IST 2004, Philip S Tellis wrote:
I'm not sure about the rpm, I installed from source, but it should be the same. If my instructions don't work, then give me the output of rpm -q linc-daemon
Instructions:
After installing, you should have the following files:
/usr/bin/linc /etc/lincrc
if you do not have /etc/lincrc, then create it using the command:
touch /etc/lincrc
now, edit this file:
vi /etc/lincrc
My file looks like this:
# Config file for linc cablenet client srvaddr = 172.16.1.1 srvport = 6060 username = tellis password = xxxxxxxxxxx hwaddr = 00:E0:4C:00:03:42
you should change the settings to whatever your operator gives you. hwaddr is specific to your machine, you can use the ifconfig utility to find out:
/sbin/ifconfig
eth0 Link encap:Ethernet HWaddr 00:E0:4C:00:03:42 ^^^^^^^^^^^^^^^^^
next, you'll need to configure your resolv.conf file to use the dns server that your ISP gives you.
finally, I've attached a linc startup script to this mail. You should copy it to /etc/init.d and run the following commands:
chmod +x /etc/init.d/linc chkconfig --add linc chkconfig linc on
This will ensure that linc connects to the net when your machine boots up. To start linc immediately, run the following command:
/etc/init.d/linc start
to stop linc, run:
/etc/init.d/linc stop
other options can be got by running
/etc/init.d/linc
NOTES:
before you do anything, try and understand how things work. man linc man lincrc will explain a lot
You can also start linc by just running the linc program. This will start linc on the current console, but in the background. You will have to send it signals using the kill command, which IMO isn't very user friendly.
Subscribing to the linc-user's mailing list (on sourceforge) can help.
Philip