SuSE Meta pppd (smpppd-ifcfg), Version 1.16 on linux. Status is: disconnected trying to connect to smpppd connect to smpppd Status is: disconnected Interface is eth1. Status is: connecting pppd[0]: Plugin rp-pppoe.so loaded. pppd[0]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2 pppd[0]: Plugin passwordfd.so loaded. pppd[0]: Using interface ppp0 Status is: connecting pppd[0]: Connect: ppp0 <--> eth1 pppd[0]: Couldn't increase MTU to 1500 pppd[0]: Couldn't increase MRU to 1500 pppd[0]: Couldn't increase MTU to 1500 pppd[0]: CHAP authentication succeeded: Welcome to sion001. pppd[0]: peer from calling number 00:08:C7:B3:2F:71 authorized pppd[0]: local IP address 202.63.180.106 pppd[0]: remote IP address 202.63.173.18 pppd[0]: primary DNS address 202.63.164.17 pppd[0]: secondary DNS address 202.63.164.18 pppd[0]: Script /etc/ppp/ip-up finished (pid 6647), status = 0x0 Status is: connected pppd[0]: Modem hangup pppd[0]: Couldn't increase MTU to 1500 pppd[0]: Couldn't increase MRU to 1500 pppd[0]: Connection terminated. pppd[0]: Connect time 0.1 minutes. pppd[0]: Sent 54 bytes, received 54 bytes. pppd[0]: Script /etc/ppp/ip-down finished (pid 6790), status = 0x0 Status is: disconnected pppd[0]: Connect time 0.1 minutes. pppd[0]: Sent 54 bytes, received 54 bytes. pppd[0] died: A modem hung up the phone (exit code 16)
This is the error that i get after i type ifup eth1 and then try to connect to the ISP configured in my DSL services.
can someone tell me how to solve this problem?
Hi V, I too had a similar problem,I reconfigured the ethernet interface through yast -> advance options in network interface -> manually changed the mtu to 1500 and that solved my purpose.
Regards, Rohit Baisakhiya, GNU/Linux Consultant.
SuSE Meta pppd (smpppd-ifcfg), Version 1.16 on linux. Status is: disconnected trying to connect to smpppd connect to smpppd Status is: disconnected Interface is eth1. Status is: connecting pppd[0]: Plugin rp-pppoe.so loaded. pppd[0]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2 pppd[0]: Plugin passwordfd.so loaded. pppd[0]: Using interface ppp0 Status is: connecting pppd[0]: Connect: ppp0 <--> eth1 pppd[0]: Couldn't increase MTU to 1500 pppd[0]: Couldn't increase MRU to 1500 pppd[0]: Couldn't increase MTU to 1500 pppd[0]: CHAP authentication succeeded: Welcome to sion001. pppd[0]: peer from calling number 00:08:C7:B3:2F:71 authorized pppd[0]: local IP address 202.63.180.106 pppd[0]: remote IP address 202.63.173.18 pppd[0]: primary DNS address 202.63.164.17 pppd[0]: secondary DNS address 202.63.164.18 pppd[0]: Script /etc/ppp/ip-up finished (pid 6647), status = 0x0 Status is: connected pppd[0]: Modem hangup pppd[0]: Couldn't increase MTU to 1500 pppd[0]: Couldn't increase MRU to 1500 pppd[0]: Connection terminated. pppd[0]: Connect time 0.1 minutes. pppd[0]: Sent 54 bytes, received 54 bytes. pppd[0]: Script /etc/ppp/ip-down finished (pid 6790), status = 0x0 Status is: disconnected pppd[0]: Connect time 0.1 minutes. pppd[0]: Sent 54 bytes, received 54 bytes. pppd[0] died: A modem hung up the phone (exit code 16)
This is the error that i get after i type ifup eth1 and then try to connect to the ISP configured in my DSL services.
Yup this is true with few ISPs who require lower MTU. Heres what my Netgear manual says about MTU setting. "MTU Size
The normal MTU (Maximum Transmit Unit) value for most Ethernet networks is 1500 Bytes. For some ISPs, particularly some using PPPoE, you may need to reduce the MTU. This is rarely required, and should not be done unless you are sure it is necessary for your ISP connection. " I had to set it to 1492 to get it working with Exact. - ARV
On Tue, 3 Aug 2004 05:26:41 +0530, Rohit Baisakhiya rohitbaisakhiya@speedpost.net wrote:
Hi V, I too had a similar problem,I reconfigured the ethernet interface through yast -> advance options in network interface -> manually changed the mtu to 1500 and that solved my purpose.
Regards, Rohit Baisakhiya, GNU/Linux Consultant.
SuSE Meta pppd (smpppd-ifcfg), Version 1.16 on linux. Status is: disconnected trying to connect to smpppd connect to smpppd Status is: disconnected Interface is eth1. Status is: connecting pppd[0]: Plugin rp-pppoe.so loaded. pppd[0]: RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2 pppd[0]: Plugin passwordfd.so loaded. pppd[0]: Using interface ppp0 Status is: connecting pppd[0]: Connect: ppp0 <--> eth1 pppd[0]: Couldn't increase MTU to 1500 pppd[0]: Couldn't increase MRU to 1500 pppd[0]: Couldn't increase MTU to 1500 pppd[0]: CHAP authentication succeeded: Welcome to sion001. pppd[0]: peer from calling number 00:08:C7:B3:2F:71 authorized pppd[0]: local IP address 202.63.180.106 pppd[0]: remote IP address 202.63.173.18 pppd[0]: primary DNS address 202.63.164.17 pppd[0]: secondary DNS address 202.63.164.18 pppd[0]: Script /etc/ppp/ip-up finished (pid 6647), status = 0x0 Status is: connected pppd[0]: Modem hangup pppd[0]: Couldn't increase MTU to 1500 pppd[0]: Couldn't increase MRU to 1500 pppd[0]: Connection terminated. pppd[0]: Connect time 0.1 minutes. pppd[0]: Sent 54 bytes, received 54 bytes. pppd[0]: Script /etc/ppp/ip-down finished (pid 6790), status = 0x0 Status is: disconnected pppd[0]: Connect time 0.1 minutes. pppd[0]: Sent 54 bytes, received 54 bytes. pppd[0] died: A modem hung up the phone (exit code 16)
This is the error that i get after i type ifup eth1 and then try to connect to the ISP configured in my DSL services.
-
Asit Vadhavkar -
Rohit Baisakhiya -
Vidyasagar Venkatesh