On Sun, 22 Jul 2007 Siddhesh Poyarekar wrote :
On 21 Jul 2007 18:42:22 -0000, Joel Solomon joel_joel72004@rediffmail.com wrote:
i tired doing an ifup eth0 as given in the wiki..... but after i do that it says "eth0=eth0".... i don't even know what that means.... when i checked the hardware information.... it detects it as a dlink 502T adsl modem... but on the second line it says unknown device...
Execute this command in your terminal and paste the output on list:
dmesg | grep cdc_ether
-- Siddhesh Poyarekar This document validates as Plain Text
did do as you said...... but the prompt comes again... without any output... even tried running the same command as root!!!!
On 22 Jul 2007 20:01:30 -0000, Joel Solomon joel_joel72004@rediffmail.com wrote:
On Sun, 22 Jul 2007 Siddhesh Poyarekar wrote :
Execute this command in your terminal and paste the output on list:
dmesg | grep cdc_ether
did do as you said...... but the prompt comes again... without any output... even tried running the same command as root!!!!
So, the module isn't loaded. Try loading it. modprobe cdc_ether or it maybe usbnet. Do it as root.
On 22 Jul 2007 20:01:30 -0000, Joel Solomon joel_joel72004@rediffmail.com wrote:
did do as you said...... but the prompt comes again... without any output... even tried running the same command as root!!!!
Ok. No when you plug in your router into the USB, does the 'USB' led on the router turn itself on at any time? Is the 'Power' LED on the router on?
-
Joel Solomon -
mehul -
Siddhesh Poyarekar