Hi all,
i have a 20 GB HDD & have win2000 preinstalled on it with just one primary
partition (C: drive). & the disk is filled upto 55% of its capacity, now i want
to install Linux on it by making a another partition & installing 2 OS's over
it which i have done many a times but as my current HDD has just 1 partition &
is filled upto 10 GB i face a problem while installing RH 7.1
The error i am getting is --> boot partition >1024 cylinders.
.. well i created the partition using *fips* utility which partitions without
loosing the data on the drive present currently but when tried to install it
gave me the error above again & again & was unable to install linux(sorry
GNU/linux) ;)
i guess this problem is becoz the boot partition or may be the primary
partition shouldnt exceed 3 gb..
plz suggest me a solution ..i tried to find bootpartition software but i didnt
get it on the net & also donno how to fiddle with it.
Thanx
cheers~
</shahazad>
--
Get your firstname@lastname email for FREE at http://Nameplanet.com/?su
I deleted the original message, so can't reply directly.
Videotaping the lecture is a good idea; I don't suppose TIFR has
already thought of that?
Has anyone contacted the press?
--
Satya. <URL:http://satya.virtualave.net/>
US-bound grad students! For pre-apps, see <URL:http://quickapps.cjb.net/>
"Please feel free to blither now." -- THHGTTG
and ofcourse the winner will win the dinner with RMS on
18th. (Dinner is hosted by RH India and its Invitation only Dinner...
Pls
refer Parag's earlier mail
I Seemed to be the only placard holder - so does the "only" placard
holder at 2-30 am,become the best by default??
the message said "welcome St. Ignucius" and he saw it the moment he came
out so at least it served its purpose well.
Regards,
Triptpal Singh
There is no chance, no fate, no destiny that can circumvent, or hinder,
or control a firm resolve of a determined soul.
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Dear Colleague,
This is to remind you of the following ACM event.
Regards,
- Durgesh
ACM Seminar
Friday, July 20, 2001 - 6:30 p.m.
Title: Regular Expressions
Speaker: Philip Tellis
Venue: Lecture Theatre, NCST, Juhu
Abstract: Whether you're a programmer, system administrator, or just
someone who wants to run a very finely tuned search, regular expressions
make your job much simpler - if you know how to use them well. A regex is
a grammar, built specifically to match patterns in large amounts of
text. Once you start using regular expressions, you'll wonder how you ever
got along without them.
Languages like awk, perl, python, elisp, etc. and editors like vi and
emacs have built-in regular expression parsers, while the unix command
line provides us with the all powerful grep and sed.
We will introduce regular expressions using some common shell utilities,
and then proceed to look at advanced concepts in perl.
So, as they say at Bell Labs Unix: Reach out and grep someone.
About the Speaker: Philip Tellis has been programming in various languages
since 1985. He started using Unix and perl as late as 1999, and never
looked back. He uses regular expressions during the course of a normal
day. Be it writing perl, shell scripting, grepping his file system, or
just a file in vi, the regex is something he cannot do without.
----------------------------------------------------------------------------
Durgesh D Rao (DDR) | Email: durgesh(a)ncst.ernet.in
Research Scientist, KBCS Division | Ph: 6201606x372(w), 7563437(r)
National Centre for Software Technology | Fax: +91-22-6210139
Gulmohar Rd 9, Juhu, Mumbai 400049, INDIA.| Web: www.ncst.ernet.in/~durgesh
----------------------------------------------------------------------------
Making effective use of Pine - I
================================
I decided to start this series with pine, because, along with lynx, it was
one of the first Unix programs that I ever used. For this, I thank vsnl
for giving students shell accounts, and not full fledged ppp dial-ins.
During the course of these tutorials, we will learn how to use pine as an
effective mail and news reader, and hopefully increase productivity as
well.
Some important things to note though, Pine was developed by the University
of Washington as a Program for Internet News and Email. Hence the name.
Pine could also mean Pine Is Not Elm, but that's a different story
altogether. Pine was initially designed for inexperienced users, so if
you fall in that category, you have no excuse for not using it. If you're
an advanced user, pine has features for you too.
One last point before we start using pine. It is not licenced under the
GPL. The licence allows you to see the source, and even to modify it, but
not to redistribute modified versions of its source.
Now, on with the show.
To start pine, one would normally type pine at the shell prompt:
$ pine
This brings you to the main screen. The most important thing you need to
know here is, Q is to quit.
Now, read what's on screen. The menus are self explanatory, use the
cursor keys to move up and down, or just press the access key marked to
the left of each command. To get back to this screen from almost
anywhere, press M.
At the bottom, we have a complete menu that is always available to us.
Press O to see some more commands in this list.
Now, lets move on to composing mail. Most of you would have figured out
how to compose a mail by now, if you didn't already know it. We'll jump
straight to advanced compose options.
Get into compose mode (you've got to figure this out yourself).
While you're in the header section, have a look at the menu at the bottom
of the compose screen. Now move down to the body section and see what the
menu changes too. In fact, if you look closely, you'll notice the options
changing for every header field that you're on.
While in header mode, there's one particular entry called `Rich Hdr'.
The access key for this command is Ctrl+R. It's actually marked as ^R,
because ^ is the common way of denoting a control character. We will use
Ctrl+R because we aren't really running short of space.
Press Ctrl+R while in the header of your message.
If you've ever used mail before, you're certain to have received spam.
Ever notice how your address is not included in the header, but the mail
still gets to you. Well, you can do something similar through pine,
although we don't want to start spamming.
The Bcc: header, which shows up after you press Ctrl+R lets you do this.
The format is the same as the To: and Cc: fields. You can enter a comma
separated list of addresses here, any number of them, and no one will be
any wiser. None of the addresses included in the Bcc: field show up in
the recipients mail. In fact, there is no Bcc: field in the received mail
(Some mail clients and servers are broken, and don't always honour this).
We also notice a few other fields called Newsgrps, Fcc and Lcc. Newsgrps
is basically a list of newsgroups that you want to post your message to.
You'd typically not use both a To, and a Newsgrp, although you can. We
won't delve into this too much, because chances are, if you're using a
newsgroup, you don't really need this document.
Fcc and Lcc are slightly confusing, because they aren't part of standard
mail headers. They don't show up on received mail. Actually, they aren't
even included in the mail you send. Looking at the default value for Fcc,
it's easy to figure out that that's how all mails you send end up in your
sent-mail folder.
Fcc stands for File Carbon Copy, and is the name of a (mail) folder where
sent mail will be saved, *before* it is actually sent. This is important
to remember, because if pine cannot write the mail to the Fcc folder, it
will not send it. You could delete the entry in the Fcc: field to not
save your outgoing mail. We'll see later how to do this permanently.
Lcc stands for list carbon copy, and is something unique to pine. It is
similar to the Bcc: field, except that one can enter the name of a
distribution list here. Pine will expand the addresses in the
distribution list in the Lcc: field, and put the name of the list in the
To: field. Each person listed in the Lcc: field receives a copy of the
mail, but all they see is the name of the list without any of the
addresses. We'll see later how to create a distribution list.
The next field is Attchmnt, and is where you specify a list of files that
you want to attach to your outgoing mail. You can use Ctrl+T to select
files from your directory, or type in the file name itself. Files are
encoded using Base64 encoding. We don't really need to know what that is,
because all mail programs understand it, and will happily decode it for
you. What you do need to know, is that base64 encoding will always
increase your file's size by 133% (in English, that means that the
attached file will be a third larger than the original file). If your
file is plain text, and doesn't have any lines longer than about 72-74
characters, it might be a good idea to just paste it in the body of the
mail. Which is what we talk about next.
Actually, we'll talk about it just after this short note about the
subject. The subject field is one of the most important fields as far as
the recipient is concerned. It should tell the recipient as much as
possible about the mail, while still being less than 40-50 characters in
length. Many people read mail selectively based on the subject
(especially when they receive a large number of mails), so be sure to
always use a meaningful subject in formal correspondence.
Now, we come down to the body section. I'm assuming you already know by
now how to type your mail. Pasting the contents of a file into the mail
body is even easier. Just use Ctrl+R (Yes, the same Ctrl+R, it has a
different meaning here). In the body, Ctrl+R stands for Read file, and
you've got to give it a file name. You could use Ctrl+T just as in the
attachment case above to select a file from your directory, and in really
new versions of pine, you could also paste the contents of another
message. I'll leave that for you to figure out.
That's it for this installment. For now, you should try out the address
book feature from the main menu. Add all your friends' and family
members' addresses to it. We'll use it the next time.
Philip
--
The clothes have no emperor.
-- C.A.R. Hoare, commenting on ADA.
Visit my webpage at http://www.ncst.ernet.in/~philip/
Read my writings at http://www.ncst.ernet.in/~philip/writings/
MSN philiptellis Yahoo! philiptellis
>>Helo Krishnan,
>>inetd folder as well as inetd.conf file is not there. I am
>>using version
>>7.1
>>Thanks
>>=======================
>>Darshan S. Wakchaure
>>=======================
it is in /etc
noel
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Making effective use of Pine - IV
=================================
Today we'll look at advanced commands in pine. The first option is
enable-aggregate-command-set. This allows you to apply a single command
to a group of messages. Useful if you want to delete or save all messages
that meet some common criteria. The next option, enable-bounce-cmd, is
used to bounce messages. If you've ever received mail that you wanted
forwarded, but wanted to make it look like it had come from the original
sender, then use the bounce command. The access key for bouncing a
message is B.
You may want to enable the flag commands, which allow you to set certain
flags on messages. You could flag a message as important, so that it
shows up with an asterisk in your message index. You can also use these
to unset the Answered, Deleted or New flags.
Enable-full-header allows you to use the H access key to see the full
header of received messages. This is useful if you want to see the full
path that the mail has travelled to get from its source to its
destination.
Enable-goto-in-file-browser allows you to tell the file browser exactly
which directory you want to go to by typing in its path. This is useful
if you need to attach files that are not in the current directory. It's
much faster than navigating to the directory every time.
Enable-jump-shortcut allows you to jump directly to a message in your
message index by typing in its number and pressing Enter.
Enable-partial-match-lists and enable-tab-completion affect the behaviour
of selection entries. For example, if you wanted to save a message to
another folder, just pressing s and Ctrl+X (for the partial match), will
show you all folders that start with s. Alternately, if one presses
sa<Tab>, and there is only one folder starting with sa, then the folder
name is automatically completed. This is similar to the way commands are
completed in bash.
In Advanced User Preferences, the few that you may want to set include
auto-move-read-msgs, enable-mouse-in-xterm, enable-newmail-in-xterm-icon,
save-will-advance, and use-current-dir. The first will move read messages
to the read-messages folder when closing the folder, if one was set.
We'll see more on this when we deal with incoming-folders.
Save-will-advance moves to the next message after saving the message.
Use-current-dir uses the directory that pine was started in as the default
for Takes and Exports.
If you find yourself using the same set of commands every time you start
pine, for example, pressing I to get to the message index, you may want to
put those commands in the initial-keystroke-list. Anything put here will
be treated as if you entered it through the keyboard when starting pine.
Moving down, we come to character-set. It will normally be set to
US-ASCII, but too many people today use iso-8859-1, so it may make sense
to set it to this. If you have a favourite text editor (pine's default is
pico), then you can set that in editor. vi seems to be a good choice.
The speller is the program that is called when you do a Ctrl+T in compose
mode. It is supposed to check and correct spellings. The default is the
unix spell command that only returns a list of misspelled words. Do not
set this value to spell, leave it blank instead.
The composer-wrap-column is the column number where the composer will wrap
long lines. Setting it to something like 72 or 74 will take care of extra
characters added by the reply indent string set when replying to messages.
The reply-indent-string is by default set to >. It's probably not a good
idea to change this, because many mail clients rely on this string to
display original text and current text in different styles.
The reply-leading is what shows up at the top of the message when you
choose to include the original text in the reply. Pine has a very
customisable reply-leadin, but you'll have to explore that on your own.
It allows you to include conditions, and variables in your leadin.
Display and sending filters can be used to modify mails before sending or
after receiving. A typical use of this would be to sign your mails with
PGP and then to decode it when received.
Alt-addresses are a very useful feature when replying to mails. Let's say
you have many email accounts, and you use pine to read all of them. When
you reply to a message, and choose to reply to all recipients, pine will
also reply to all your other addresses. By putting those addresses in
here, pine will detect that they are your addresses, and that they
shouldn't be included in the reply list.
url-viewers, which is the last option that we will modify, allows you to
set the program that is spawned to view urls in the mail. You'd probably
want to start something like netscape if you are running X, but lynx or
some other text browser if you are not.
I have my url-viewers set to this:
_TEST("test -L $HOME/.netscape/lock")_ "/usr/bin/netscape -remote 'openURL(_URL_, new-window)' &"
_TEST("test -n '${DISPLAY}'")_ "/usr/bin/netscape _URL_ &"
"/usr/bin/lynx _URL_"
Yes, all three lines. Pine will execute everything in _TEST()_ and if it
evaluates to true, will execute the rest of that line. Over here, I first
check to see if netscape is already running, if so, then call
netscape -remote. If not, then if the DISPLAY variable is set, call
netscape. If the DISPLAY variable is not set, then call lynx.
You could probably omit the first line, because your netscape startup
script already does that check. Notice that netscape is started in the
background, while lynx isn't. This is so because lynx runs in the same
window as pine (in the shell), while netscape starts its own window.
It's not easy to enter this string in the configuration screen, so you may
want to type it directly into your .pinerc file. Just search for
url-viewers.
The next time, we'll look at incoming-folders, and that will conclude this
series on pine. There's obviously much more you can do, but you'll have
to figure that out yourself. This should get you started on your way.
--
"Being against torture ought to be sort of a bipartisan thing."
-- Karl Lehenbauer
Visit my webpage at http://www.ncst.ernet.in/~philip/
Read my writings at http://www.ncst.ernet.in/~philip/writings/
MSN philiptellis Yahoo! philiptellis