[satyap]~$ zgv
svgalib: mmap error in paged screen memory.
[satyap]~$
Why?
Kernel 2.4.8. That's the only change.
--
Satya. <URL:http://satya.virtualave.net/>
To this day she declares that I told her one moving anecdote as to how a
musket looked into my tent at the dead of night, and how I fired a
double-barrelled tiger cub at it. --Watson, in "The Sign of the Four"
jtd spewed into the ether:
<snip>
>> You are speaking of 802.11b LAN cards. We provide Essar with 512
>> mbps in the same frequency band, and they are 16 km away.
>
>How come. If ur using 802.11b the spec standards specify power limits
I am not referring to 802.11b, except for the frequency range.
We use the same frequencies (and we can ask for a wide enough range), but not the tech.
Sorry about any confusion there.
Devdas Bhagat
------------------------------------------------------------
Nettaxi would like to ask for your help in donations to the RED CROSS today!
http://www.nyredcross.org/donate/
jtd spewed into the ether:
<snip>
>AFAIK the range is limited to 100 mtrs. If you use an ISHM frequency
You are speaking of 802.11b LAN cards. We provide Essar with 512 mbps in the same frequency band, and they are 16 km away.
>(and rig up your own radio modem) your throughput will drop to
>1200bps. Other frequencies require licenses from the police and DOT
>used to cost Rs.25000 per alloted frequency/p.a. and requires you to
>use only DOT approved equipment.
Still cheap. Any telecom people on this list who can help out with the info/tech?
Devdas Bhagat
------------------------------------------------------------
Nettaxi would like to ask for your help in donations to the RED CROSS today!
http://www.nyredcross.org/donate/
So I got this message about my computer back home. Any ideas? No
kernel changes.
again stuck up, says FPU using exception 16 error reporting.
checking " hlt" instruction....<1> unable to handle kernel paging
request
at virtual address ffc0000
many zeroes
..... ... .........
...
kernel panic: attempted to kill the idle task
IN swapper task- not syncing
--
Satya. <URL:http://satya.virtualave.net/>
Don't use a big word where a diminutive one will suffice.
Sorry my earlier prob was not defined properly So I am sending the error
again. I guess my dial up connection died down when i tried previously. the
actual problem sounds like this..................
2 messages for goldwyn_r at pop.softhome.net (8132 octets).
reading message 1 of 2 (3711 octets) .fetchmail: SMTP connect to localhost
failed
fetchmail: can't raise the listener; falling back to $procmail -d %T..sh: -d:
command not found
fetchmail: MDA exited abnormally or returned nonzero status
not flushed
reading message 2 of 2 (4421 octets) ....sh: -d: command not found
Please note that it works perfectly fine with a MUA(Mail User Agent) like
KMail. howeevr I am not keen on doin gthis as there are quite a few people
worin gon this system and i want mail of eveyone to be downloaded in one
connection and distributed accordingly. Procmail is also installed.
Another question. I am in bash shell why is it showing sh for errors??
Sorry for the trouble, and thanx again for the help.
Goldwyn :o)
Noel Sequeira spewed into the ether:
> Ifconfig gives the entire details. There was a thread sometime back
> to mail the ip address received from the modem, but i could not
> locate it from the archives. If someone is using it please post it
> on the list. Philip had written a script to this effect.
Try this one liner:
/sbin/ifconfig|grep P-t-P|tr -s ' '|cut -f 4 -d ' '|tr -d adr:
This is mostly from memory, so the paramter to cut may be wrong.
To explain:
/sbin/ifconfig -- get all network details
grep P-t-P -- get the line containing the external ppp ip address
tr -s ' ' -- convert all multiple space fields to a single space.
cut -f 4 -d ' ' -- cut the fourth field using a delimiter of a space.
(There is a space at the beginning, which you have to consider)
tr -d adr: delete the addr: part of this field.
Devdas Bhagat
------------------------------------------------------------
Nettaxi would like to ask for your help in donations to the RED CROSS today!
http://www.nyredcross.org/donate/
I have a dial up connection and whenever I run fetchmail (after connection)
it gives me the following error.
fetchmail: timeout after 300 seconds waiting for server pop.softhome.net.
fetchmail: Query status=7 (ERROR)
client/server synchronization error while fetching from pop.softhome.net
Anu idea what cud be the reason?? I have sendmail runnoing properly and mail
thru MUA works fine but however i wanted to configure fetchmail so that mails
of all users can come and go together.
Goldwyn :o)
-------------------------------------------------------
>From: Goldwyn Rodrigues <goldwyn_r(a)yahoo.co.uk>
>
>
>I have a dial up connection and whenever I run fetchmail (after connection)
>it gives me the following error.
>
>fetchmail: timeout after 300 seconds waiting for server pop.softhome.net.
>fetchmail: Query status=7 (ERROR)
>client/server synchronization error while fetching from pop.softhome.net
That is because it is taking too much time for your host to connect to your
mail server. Either your link is slow or your mail server is down.
I use
poll mail.server with protocol pop3 timeout 1200
HTH
Noel.
Gnu/Linux registered user #226476
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
hi linuxers,dai'm having this strange problem. all my mail clients hang,
wheneverda i hit compose, reply, forward. this list includes mutt, pine,
netscape.dai'm using the PCQ(based on redhat 7.1 distro ). i have recently
reinstalleddathis distro and had copied my mail folders from backup to home
directory (though i think.dathat should not be a problem).daanyone knows
whats happ ???dadaparvez
Hi luggers,
Is it possible to use two gateways, one from a fixed ip provider (hathway)
on my eth1 and the other from dial-up (vsnl) on my ppp0 (modem)
Using hathway, i can browse better, but download of mails is painfully slow.
Using vsnl dial-up, i am able download mails, but browsing is very slow.
Moreover if i use vsnl for browsing, it slows my mail download.
Right now i have to manually change the gateway (using linuxconf), and then
connect to vsnl. After downloading the mails, i disconnect and switch to
hathway.
I tried man route to change the routing rules manually, but it does not
work.
route add gw 202.88.136.1 Nm 0.0.0.0 dev eth1
Suggestions please
Noel.
Gnu/Linux registered user #226476
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
