Dear Sir,
On searching over in net about NTP Time Servers , I came across your page.Pardon me for this unwanted intrusion. You seemed to me the same way excited about the Time Servers as myself. The page lists some Get-Time Servers, but mostly these servers are of Stratum 2 or 3. Do you have any information about primary stratum 1 Time Servers operating in India and what or where is the Reference clock situated. If you have any information regarding this, it would be really appreciated if you could inform me on this.
Thanking you.
*************************************************
R.S.V.P
MR. SIDDHARTHA BHATTACHARYA
E-mail me at:
1. siddharthab19(a)yahoo.com
2. siddhartha19(a)hotmail.com
3. siddhartha19(a)lycos.com
Hello Monil Chheda
To best of my knowledge you can use partition magic which is a free
software available for download. You can boot your computer using pqmagic
floppy.
Regards
Pradeep
> Hello,
>
> Thank you for your prompt reply.Well , Can you guide me how to go about
> deleting the partitions as i cannot see the linux partition when i boot
> to win98 .I do not have much experience using fdisk.
>
> Please help me again.
>
> Best Regards,
> Monil Chheda.
> ===========================
> http://www.eliteral.com
> http://domains.eliteral.com
> ===========================
>
> Linux Lover wrote:
>
> > 1) To remove linux delete the partitions where u have installled linux.
> > 2) To restore the boot sector, boot with windows 98 floppy and run fdisk
> > /mbr
> > lilo
> > ----- Original Message -----
> > From: Monil Chheda <monil(a)eliteral.com>
> > To: <linuxers(a)mm.ilug-bom.org.in>
> > Sent: Tuesday, February 12, 2002 10:00 PM
> > Subject: [ILUG-BOM] A new bee in linux
> >
> >
> >
> >>Dear friends,
> >>
> >>I am a newbee to linux . I have a 20 gb hdd with 4 partitions of 5 gb
> >>each. I ran win98 till now and i still have it .Recently i installed
> >>RedHat 7.1 on one of my partitions With linux in the master boot record.
> >>The pc boots up and prompts me to load linux or dos(win98) . Now to
> >>remove Linux how do I work out."
> >>--
> >>Best Regards,
> >>Monil Chheda.
> >>===========================
> >>http://www.eliteral.com
> >>http://domains.eliteral.com
> >>===========================
> >>
> >>
> >>_______________________________________________
> >>http://mm.ilug-bom.org.in/mailman/listinfo/linuxers
> >>
> >
> > _______________________________________________
> > http://mm.ilug-bom.org.in/mailman/listinfo/linuxers
> >
> >
> >
> >
>
>
> _______________________________________________
> http://mm.ilug-bom.org.in/mailman/listinfo/linuxers
>
>
>
>
--
Sent using NeoMail, a web-based e-mail client.
http://neomail.sourceforge.net
how to give root privelages to non-root users?
Get Your Private, Free E-mail from Indiatimes at http://email.indiatimes.com
Buy Music, Video, CD-ROM, Audio-Books and Music Accessories from http://www.planetm.co.in
hi there everyone,
i have adoubt, how can we have the system correctly
boot with the required modules, if i have 2 kernels
which differ only by a patch ?
i have compiled 2.4.17 and the same one with with a
premptive patch.
the system.map of both the kernels is in the boot and
also i had compiled the modules of both the kernels,
however the second kernel( preemptiv ) has overwritten
the modules anyway.
can i copy the modues of both of them as different
directries in /lib/modules/ and have them loaded
accoreding to the kernel from whihc i am booting the
computer.
regards
-rahul
__________________________________________________
Do You Yahoo!?
Yahoo! Sports - Coverage of the 2002 Olympic Games
http://sports.yahoo.com
On Sat, 16 Feb 2002 20:39:55
kshitijv wrote:
>Hi all,
>how can give options to LILO at boot time? In earlier versions, with the text version of LILO, it was very easy. But in 7.1 how can I eneter boot parameters from the graphical boot screen?
>
>Please help me!
>
>kshitijv
>e-mail: kshitijv(a)forindia.com
>
>
>_______________________________________________
>http://mm.ilug-bom.org.in/mailman/listinfo/linuxers
>
>
Have a look around the screen and you'll find the way out. :-|
OK, just press Ctrl+x to get at the boot: prompt.
---
Tahir Hashmi (VSE, NCST)
http://tahirhashmi.scriptmania.com
mailme(a)tahirhashmi.scriptmania.com
__________________________________
We, the rest of humanity, wish GNU luck and Godspeed
Check out Cupid School where you will learn from Matchmaker's
best and brightest. Good Luck!
http://ecard.matchmaker.com/cupid0202/cupid0202.html
to : all
What is a dial command in wvdial for diabling wait for
dial tone.
Rgds
Girish
__________________________________________________
Do You Yahoo!?
Yahoo! Sports - Coverage of the 2002 Olympic Games
http://sports.yahoo.com
Dear friends,
I am a newbee to linux . I have a 20 gb hdd with 4 partitions of 5 gb
each. I ran win98 till now and i still have it .Recently i installed
RedHat 7.1 on one of my partitions With linux in the master boot record.
The pc boots up and prompts me to load linux or dos(win98) . Now to
remove Linux how do I work out."
--
Best Regards,
Monil Chheda.
===========================
http://www.eliteral.comhttp://domains.eliteral.com
===========================
On Fri, 15 Feb 2002 Philip S Tellis wrote :
> On 15 Feb 2002, Mahesh Gharat wrote:
>
> > open /etc/passwd and make uid 0 for that non-root
> user.
>
> not a good idea. when that new user tries to change
> his password, it
> will change root's password, but not his.
That's what called as superuser equivalence.;-)
-Mahesh
> This is so
> because passwd
> checks the uid, and looks in /etc/passwd for first
> account with that
> uid.
>
> Basic answer is don't give any other user root
> privilidges. If a user
> needs some kind of installation privilidges, put him in
> the wheel group.
> Also configure pam to use the wheel module.
>
> Alternately, sudo can be used.
>
>
> --
> If you are smart enough to know that you're not smart
> enough to be an
> Engineer, then you're in Business.
>
> _______________________________________________
> http://mm.ilug-bom.org.in/mailman/listinfo/linuxers
>
Hi,
I have purchased HP x2100 workstation.I am trying to
install the system with Redhat Linux(6.2/7.1) but it
doesnt detect the PS/2 keyboard & mouse,the system
hangs.
When i connect the USB keyboard/mouse the system works
fine.
Why this problem,i dont have enough USB
Keyboards/mouse & need to get the system working with
PS/2 keyboard & mouse.
PLEASE HELP.
Regards,
Anurag
__________________________________________________
Do You Yahoo!?
Got something to say? Say it better with Yahoo! Video Mail
http://mail.yahoo.com
I'm facing a problem running mysql on red hat 6.2.
# uname -a
Linux dummy2.ezee 2.2.14-12 #1 Tue Apr 25 13:04:07 EDT 2000
i686 unknown
The problem is that after running the mysql server for a while,
clients stop getting connections. netstat returns the
following:
# netstat -a | grep -E 'mysql.*TIME_WAIT' | wc -l
14605
And those sockets are not getting closed. Not after waiting
for
120 secs. Not even 120 minutes! I think the problem is not
with mysql but somewhere else. There are only 67 mysql
processes running, so I guess the processes that were using
these sockets are probably dead already (assuming mysql forks
for every connection).
No clue. How do I free these port numbers so that other
sockets
can be bound to these ports? Or have I got it totally wrong?
Thanks in advance.
Manish
________________________________________________________________________
Looking for a job? Visit Yahoo! India Careers
Visit http://in.careers.yahoo.com