Hi All,
The problem continues here......
On the 2nd day, the system hanged twice ( in 2 tries)
I needed to hardboot these times.
On the 3rd try I get the message like:
"An error occured while transfering the install image to
your hard disk. You are probably out of disk space."
this sends me back where the installation starts.
[ Read the message carefully, as I mention above, I had kept
around 3.7 GB for / & the total package size was around 1.5GB ]
once again I tried to install, but again I got the same message.
so I decided to make a clean installation & moved back by pressing
back button. When I reached to partitioning part of the installation,
I got the message.....
" The partition table on device hda is carrupted. To create new partitions
it must be initialized causing the loss of ALL DATA on this drvie"
This was along with 2 options [ initialize ] [ skip Drive ]
Naturally, I skiped the Drive b'coz I do not wanted to loose all my data
which is in windows.
This gives me another message, " an error has occured - no valid devices
were found on which to create new file system. Plz check your hardware
for the cause of this problem.
Pressing [OK ] leads me to another message, " An exceptional condition
has occured. This is most likely a bug. Plz copy the full txt of this exception
& file a bug report at http://bugzilla.redhat.com/bugzila"
[ I have a copy of the bug with me & not attached here, if anybody want it
I can send it to them. ]
${ Do I need to remove all the partitions, (including windows partition which I don't
want to be,b'coz of my data) to initialize the disk & re-define the partition table
hi folks,
We need to deploy a qmail with LDAP for address book and
authentication at several of our offices spread over the
country.
We'll be putting one central server at our data center,
with an anti virus gateway for it.So its a hub-n-spoke
kinda architecture.All mails to-n-fro the Internet will
pass thru this central server.
some issues that i'd like help with:
1)i need a single domain ( company.com) to be hosted across
these multiple mail servers
2)Intra-office mail, i.e mail from an user to another user
in the same office should be delivered locally.
3)Mail for remote user i.e.one situated at another location
should be routed to that location's mail server, but
through the central anti-virus gateway.
4) All users have a common web interface for changing
passwords
5)In case of qmail,how can i have some accounts on the
local server and then instruct the server to send mails to
some other user but belonging to the same domain to some
other smtp sever.. this without LDAP....
i.e user1(a)company.com wants to mail user2(a)company.com
but user1 and user2 are on diff machines .. LDAP is not
involved in the picture
i want mails to go thru a central mail server!!!!
I guess this might sound a little confusing, but i'm sure
most of ya guys will get it!
any help appreciated!
regards,
kishor
__________________________________________________
Do You Yahoo!?
Yahoo! Health - Feel better, live better
http://health.yahoo.com
We need to define a procedure for signing up for a project and Mentor-
Student responsibilities.
I have the few suggestions..
The mentor is required to bring in domain knowledge to the project.
The mentor will decide the scope of the project. [in consultation with
students based on project requirements etc]
The mentor is involved in an advisory and guiding position in all phases of
the project [planning, design, coding, testing, documentation etc]
Mentor may choose to perform part of the coding or he may not.
Students will be involved in all phases of the project and should commit in
principle to stick to the end of the project.
Mentor may choose to request some one for independant quality
assessment...[at least for non corporate projects]
More questions we need to find answers to:
If mentors for a project are decided merely on volunteer basis, then we need
functionality to support a wish list. where someone not qualified or not
having enough time to be a mentor can put up a project that someone takes up
as a mentor.
Will the mentor decide how big a team is required...& will we have projects
that students cannot sign up for?
How will a student sign up? [ i guess we need to create a page for that]
- Shankar
On Thu, 25 Jul 2002, Dinesh Shah wrote:
> The example servlets which came with the tomcat is running fine.
>
> I want to enable servlets in my "DocumentRoot"
> My servlets are in "/home/httpd/htdocs/servlet/WEB-INF/classes"
>
I had similar problems, and had followed similar steps, with an identical
configuration file. I am sorry, I don't exactly remember the procedure,
but I know where I found the answer. I searched on
http://marc.theaimsgroup.com/?l=tomcat-user
I followed the exact procedure listed in one of the message bodies.
Hope it helps.
--
Regards, | Cybertech Networks Pvt. Ltd.
| email: himanshu(a)cnpl.co.in
Himanshu | Web: http://www.cnpl.co.in
|
-----------------------------------------------------------------------
Knowledge is often mistaken for intelligence. This is like mistaking
a cup of milk for a cow.
------------------------------------------------------------------------
On Thu, 25 Jul 2002, Trevor Warren wrote:
>
> --- Gurpreet Singh <tonysingh(a)rediffmail.com> wrote:
> > hello
> > it is really good that u guys have set up the php
> > groupware
> [snip]
> neh...not groupware. phprojekt....guess that watz it
> was.
Right, it is "PHProjekt" (www.phprojekt.com ?)
> > i visited the link and logged in as "test". every
> > thing up there
> > was like greek to me. i didnt understand how to use
> > it and how wud
> > it be helpful to us...
> [snip]
> hmmm....;)
> Himanshu....guess we need to get some work done with
> the login/Signup for Student-Mentor pages 2.
I guess so...i even put this up on the list, asking everyone abt what the
next step could be. Well, php is not exactly greek to me, as far as
reading code goes, but I would rather request someone to write such an
automatic sign up page for students and mentors.
>
>
> > so plz help guys...
> > and how abt adding some help pages on the site, coz
> > many ppl like
> > me will have such probs. just add a link for help
> > and a few tips
> > on how to go abt things
Hold on...I think it already has some wonderful help pages.
For example, if you think you can't understand what the "Votes" on the
right hand side means, just click on "vote" and you'll find a new help
window explaining what it is all about. The only problem is figuring out
which links are actually help pages ;)
OK..may b we could write a small help doc on an intro, and how to go about
using phprojekt.
--
Regards, | Cybertech Networks Pvt. Ltd.
| email: himanshu(a)cnpl.co.in
Himanshu | Web: http://www.cnpl.co.in
|
-----------------------------------------------------------------------
Knowledge is often mistaken for intelligence. This is like mistaking
a cup of milk for a cow.
------------------------------------------------------------------------
A development version of GNOWSYS-0.1-1 is released at
http://www.zope.org/Members/nagarjuna/GNOWSYS.
GNOWSYS, Gnowledge Networking and Organizing System, is a web
application for developing and maintaining semantic web content
developed in Python and works as an installed product in ZOPE.
The application provides generic classes, viz. object, object type,
association, association type, facet, facet type, occurance, occurance
type, theme, scope, etc., for developing semantic web content. For
those who are aware, the application follows the structure of
TopicMaps (http://www.topicmaps.org). It is intended to develop as a
powerful prototype application demonstrating the potential of an
expert system within the paradigm+of object oriented database
technology. Presently it cannot import/export the content in the form
of XTM (XML Topic Maps) standard, but this feature is being developed.
The application can be used for web based knowledge representation and
management projects, for developing structured knowledge bases, as a
collaborative authoring tool, suitable for making electronic
glossaries, dictionaries and encyclopedias, for managing large
web sites or links, developing an online catalogue for a library of any
thing including books, to make ontologies, classifying and networking
any objects etc. This tool is intended to be used also for an on-line
tutoring system with dependency management system between various
concepts.
It also contains a facility to add rules into its rule base, and
execute the rules. Once completely implemented this feature will make
the product really powerful, for it can infer and make new relations.
Though a prototype of rule base already exists in the developing
version, more elegant implementation is being worked out.
GNOSYS is a free software, released under GPL.
Project website will be managed from http://savannah.gnu.org/projects/gnosys
Sample applications that are developed using GNOWSYS will be available
at http://www.gnowledge.org/, which is a site under development.
You can download from the Zope site:
http://www.zope.org/Members/nagarjuna/GNOWSYS
This product depends on another Zope Product, Transparent Folders.
Nagarjuna
I have RH 7.2 and squid Installed to proxy net requests. i have a
Multitech 128 ISDN (External) TA, which i have configure it on
linux on com1 port. Can some 1 please help me how to use the
second chanel of the TA ?
I also have problem with ftp & https not getting accessed form any
of the stations
please guide me
JAideep
hello
it is really good that u guys have set up the php groupware and
the PRC is now finally up and running, but dear dont mind
this...
i visited the link and logged in as "test". every thing up there
was like greek to me. i didnt understand how to use it and how wud
it be helpful to us...
so plz help guys...
and how abt adding some help pages on the site, coz many ppl like
me will have such probs. just add a link for help and a few tips
on how to go abt things
thx
Gurpreet
Hi All,
I have problem with configuring Tomcat. Please help.
Linux - RedHat 7.2 kernel 2.4.7
Java - 1.4.0 (j2sdk-1.4.0) (/usr/java)
Tomcat - jakarta-tomcat-4.0.3 (compiled from source)
Tomcat installed in "/usr/tomcat" port 8080
The example servlets which came with the tomcat is running fine.
I want to enable servlets in my "DocumentRoot"
My servlets are in "/home/httpd/htdocs/servlet/WEB-INF/classes"
My Tomcat server.xml contains -
<Context path="/servlet" docBase="/home/httpd/htdocs/servlet" debug="9"
reloadable="true" >
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="localhost_servlet_log." suffix=".txt" timestamp="true"/>
My .../servlet/WEB-INF/web.xml contains -
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<servlet>
<servlet-name>Hello</servlet-name>
<servlet-class>Hello</servlet-class>
</servlet>
<servlet>
<servlet-name>HelloWorldExample</servlet-name>
<servlet-class>HelloWorldExample</servlet-class>
</servlet>
</web-app>
The context "servlet" loads OK. (I can see the context running in manager)
When I load http://192.168.1.100:8080/servlet/Hello OR
http://192.168.1.100:8080/servlet/HelloWorldExample (taken from example
dir of Tomcat)
It gives me "404 resource not available."
I also have difficulty compiling and installing mod_jk in apache (1.3.26)
All help and pointers will be greatly appreciated.
TIA for your help
With regards,
--
--Dinesh Shah :-)
Shah Micro System
dinesh(a)indiamail.com
http://dineshah.tripod.com
Mobile: 98213-11906