We're an engineering/manufacturing company with a small (~25 pc)
network - linux on the server side, linux/xp/nt on the workstations.
We're in the process of migrating to linux. We're looking for someone
who can sys/net admin the setup.
Since the setup is small, full time (9 to 5) commitment may not be
required. Those interested can mail me (off list) at
You can't push on a string.
Concepts has always been in forefront for providing
software professionals with right directions,
methodology to ensure that they remain on cutting edge
of development and continue to win, with quality
training from experienced Industry Experts. We are
extremely happy to announce next weekend batch of
Linux Kernel Programming from Sunday i.e. 6th March
-Intel x86 Fundamentals
-Operating Systems Basics
-Character loopback device driver
-Mouse Device Driver
-System Call hooking
-Kernel Threading and synchronization
-Simple File System
Duration: Approximately 40+ Hrs (1.5 months)
3rd Floor, Nirmal Complex,
Paud rd., Kothrud,
Pune � 411038.
-Industry Driven Curriculum
-Techno-specialists as course-faculties having proven
track record in the industry
-Average rating of Concepts Trainer is 9 out of 10
-Concepts guided project �MailDisk� won prize at IIT
If you have any queries feel free to call us on 020-
25381126 Or mail us at training(a)conceptssys.com
Thanks & Regards,
+91 020 25381126 (O)
Learn From Experts! Be part of winning team!
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
>> my modem is internal---motorola sm56 PCI
>> my kernel version is 2.4.21-4.EL
You are done. AFAIK redhat wasn't supporting this modem after 7.1
try googling 'motorola sm56 pci modem RHL'. You'll meet the club.
Another noodle who bought this modem and then tried to get it working on lin
On Wednesday 02 March 2005 11:21, Vinayakam Murugan wrote:
> > Which mobo (chipset, make, model no.)?
> P4 3 GHz 800 MHz FSB 1 MB L2 Cache
> 865 Chipset Mother Board with N Videa G force 64 MB AGP Graphics
You will need the nvidia drivers, which is closed. So be ready to
face problems a few months down the line. Get em from the nvidia site.
I865 is supported in the 2.4.24 and abv kernels.
I have used several i865 boards. Uptime of several months.
On Wednesday 02 March 2005 10:39, Vinayakam Murugan wrote:
> I am running Debian 3.1 testing. I am upgrading from a PII machine
> to a PIV 2.5 ghz , 64 MB Video RAM, Cd writer .
> What would I need to do to use my old HDD without a reformat? any
> things to take care of?
No need to reformat at all. Just plug it on the same ide port as your
After that you will have to edit /etc/X11/XF86Config-4 for using the
right X11 driver.
Then run modconf and select/remove the apropriate modules.
Which mobo (chipset, make, model no.)?
I am running Debian 3.1 testing. I am upgrading from a PII machine to
a PIV 2.5 ghz , 64 MB Video RAM, Cd writer .
What would I need to do to use my old HDD without a reformat? any
things to take care of?
i recently tried installing FC3 on my system,
the first problem i faced was it did not detect my mouse.
the second problem i faced was while trying to label the partitions my
version of FC3 setup showed hung up screens.
i had to abondon my setup.
anyone can tell me whats the problem?
I have a Dell inspiron 510m laptop.
from lspci -v it shows.
000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
AC'97 Modem Controller (rev 01) (prog-if 00 [Generic])
Subsystem: Conexant: Unknown device 5422
Flags: bus master, medium devsel, latency 0, IRQ 7
I/O ports at d400 [size=256]
I/O ports at d080 [size=128]
Capabilities:  Power Management version
I installed slmodem modules. it gets the modem through alsa , &
detected by wvdialconf , when below is run.
cartoon:~# slmodemd -c INDIA --alsa
SmartLink Soft Modem: version 2.9.10 Feb 8 2005 14:54:01
symbolic link `/dev/ttySL0' -> `/dev/pts/2' created.
modem `modem:1' created. TTY is `/dev/pts/2'
Use `/dev/ttySL0' as modem device, Ctrl+C for termination.
But dialing doesnt work, there is no sound ( even after adjusting
alsamixer settings - Phone) & it doesnt dial?
What could be the problem. below is output of wvdial trying to dial
vsnl ( 172226 )
cartoon:~# wvdial vsnl
--> WvDial: Internet dialer version 1.54.0
--> Initializing modem.
--> Sending: ATZ
--> Sending: ATX3M1L3
--> Sending: ATQ0 L3 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 L3 V1 E1 S0=0 &C1 &D2 +FCLASS=0
--> Modem initialized.
--> Sending: ATDT172226
--> Waiting for carrier.
--> Unknown dial response string.
--> Disconnecting at Fri Feb 18 18:49:00 2005
Dear Kenneth Gonsalves
Any kind of input interface can be accepted. But USB will be prefered as it
is moving towards a common interface now days and also providing extra
Bilal Ahmed Mazhar