hi guys,
I have a dual boot machine windows and fedora 11. the problem is when I am windows and then fedora , I can boot fedora but not windows. it says NTLDR is missing. but when I am installing windows only it's work fine. Can anybody tell me why it's happening ?
Thanks,
Hi,
You can also try writing the cd @ a lower speed i.e. 2x / 4x
Best Regards
Prakash Shetty
------Original Message------
From: Amol Hatwar
Sender: linuxers-bounces(a)mm.ilug-bom.org.in
To: GNU/Linux Users Group, Mumbai, India
ReplyTo: GNU/Linux Users Group, Mumbai, India
Subject: Re: [ILUG-BOM] Centos not booting.
Sent: 9 Nov 2009 9:30 PM
On Nov 9, 2009, at 8:16 PM, Ramang G wrote:
> Dear All,
>
> I have downloaded centos CentOS-5.4-i386-LiveCD.iso and burnt to a
> CD, but when I try to boot from CD it is not booting.
*Chop*
Could you please give us the 'ls' output of the CD?
Also, check if other bootable CDs boot? If they don't, you need to
change some BIOS settings for boot-order.
Cheers,
Amol
--
http://mm.glug-bom.org/mailman/listinfo/linuxers
BlackBerry® Powered Email
I have been unable to extract information--phonebook, sms messages,
received/missed/called numbers logs from my Nokia N70 using wammu 0.29 on
ubuntu 9.04 using the ca53 USB cable inspite of the wammu.eu site mentioning
that the N70 phone is accessible/supported thru wammu.
The wammu software detects the device but is unable to extract the data from
it. If anybody has experience with the software or something similar in
ubunntu, pls let me know. xGnokii, gmobilemedia and kmobiletools have been
unable to access the phone even. only wammu has been able to access it using
connection=at115200 and port=/dev/ttyACM0
Nokia pcsuite does not work properly under wine in ubuntu.
Thanks for any help.
Kussh
Hi Team,
I have to recover the data from volume group storage listed in the out put
below
I lost LVM configuration in hard disk crash and
regenerated using following method.
Can someone please suggest any recovery software or any method that can
help?
taz2:/ # pvscan
PV /dev/sdj1 VG Storage2 lvm2 [372.53 GB / 0 free]
PV /dev/sdk1 VG Storage2 lvm2 [372.53 GB / 0 free]
PV /dev/sdl1 VG Storage2 lvm2 [372.53 GB / 0 free]
PV /dev/sdm1 VG Storage2 lvm2 [372.53 GB / 56.51 GB free]
PV /dev/sdb1 VG storage lvm1 [372.52 GB / 372.52 GB free]
PV /dev/sdc1 VG storage lvm1 [372.52 GB / 372.52 GB free]
PV /dev/sdd1 VG storage lvm1 [372.52 GB / 372.52 GB free]
PV /dev/sde1 VG storage lvm1 [372.52 GB / 372.52 GB free]
PV /dev/sdf1 VG storage lvm1 [372.52 GB / 372.52 GB free]
PV /dev/sdg1 VG storage lvm1 [372.52 GB / 372.52 GB free]
PV /dev/sdh1 VG storage lvm1 [372.52 GB / 372.52 GB free]
PV /dev/sdi1 VG storage lvm1 [372.52 GB / 372.52 GB free]
Total: 12 [4.37 TB] / in use: 12 [4.37 TB] / in no VG: 0 [0 ]
taz2:/ # vgscan
Reading all physical volumes. This may take a while...
Found volume group "Storage2" using metadata type lvm2
Found volume group "storage" using metadata type lvm1
taz2:/ # vgchange -a y
1 logical volume(s) in volume group "Storage2" now active
0 logical volume(s) in volume group "storage" now active
taz2:/ # lvdisplay
--- Logical volume ---
LV Name /dev/Storage2/Storage2
VG Name Storage2
LV UUID peh6QD-WDs1-HsgU-Fikw-xveC-7wT2-L2CEp3
LV Write Access read/write
LV Status available
# open 0
LV Size 1.40 TB
Current LE 367002
Segments 4
Allocation inherit
Read ahead sectors 0
Block device 253:0
*storage* is having the data
Thanks
Nilesh
Dear All,
I have downloaded centos CentOS-5.4-i386-LiveCD.iso and burnt to a CD, but when I try to boot from CD it is not booting.
what could be the problem? Pl guide.
thanks,
Raman.
Hi list,
I'm in need of a Ubuntu amd64 9.10 'Karmic Koala' desktop CD to fresh
install from, since the in-place upgrade broke my 'wired' networking.
:s :(
Please contact off-list. Anywhere on Central Line or Harbour Line is ok.
Regards,
Easwar
Registered Linux user #442065
Hi,
This isn't related to linux as such, but since we are all geeks, I
thought people might no the answer.
I'm currently looking for shell accounts and web hosting. I am ready
to pay, but all hosts in Europe/USA accept payment via Bank transfer.
Now from what research I've done it's not worth sending money out of
India due to the bureaucratic hurdles. As for Paypal, that requires a
credit card, but I only have a debit card. Does anyone here use
webhosts outside India, or say VPSes. What do you do then?
Is there any good provider of a shell account/VPS in india which will
allow me to run a SOCKS proxy using SSH? It will be purely for
personal use.
That way I can pay within India.
Nikhil
Hi All,
We are looking for a low cost , no frill Laser printer for debian 5.0.
Any suggestions, advice...
Warm Regards,
Mukund Deshmukh,
Beta Computronics Pvt Ltd,
10/1 IT Park, Parsodi,
Nagpur -440022.