Linuxers

linuxers@mm.ilug-bom.org.in

14152 discussions

Re: [ILUG-BOM] howto use tcpdump, was kget can resume downloads, other download managers can't
by shirish 28 Jan '09

28 Jan '09

Reply in-line :- On Tue, Jan 27, 2009 at 02:30, steve <steve(a)lonetwin.net> wrote: <snip> > If you really want to get to the bottom of this, I'd suggest running tcpdump > (normally, i use the options tcpdump -s0 -w <output>.cap host <youripaddress>) > and then reading the capture file using wireshark, both with kget and with wget. <snip> Hi Steve, sorry for jumping on the thread. I am on kernel 2.6.27 and there is a big possibility I haven't really understood your command. You gave tcpdump -s0 -w <output>.cap host <youripaddress> I used :- tcpdump -s0 -w output.cap host 59.95.28.28 (ouput.cap most probably is a file-name and the IP Address is the IP Address being assigned by my provider) but both for this I get tcpdump: no suitable device found Doing a cursory look at dmesg came across this . [37479.042325] tcpdump uses obsolete (PF_INET,SOCK_PACKET) My ifconfig. $ ifconfig eth0 Link encap:Ethernet HWaddr 00:07:95:44:10:db UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:18 Base address:0xc800 eth1 Link encap:Ethernet HWaddr 00:08:a1:92:56:33 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::208:a1ff:fe92:5633/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1990826 errors:0 dropped:0 overruns:0 frame:0 TX packets:2204997 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1271599953 (1.2 GB) TX bytes:537487624 (537.4 MB) Interrupt:22 Base address:0xcc00 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:556 errors:0 dropped:0 overruns:0 frame:0 TX packets:556 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:50924 (50.9 KB) TX bytes:50924 (50.9 KB) As can be seen the active connection here is eth1. The connection is between ethernet card and router. > regards, > - steve -- Regards, Shirish Agarwal My quotes in this email licensed under CC 3.0 http://creativecommons.org/licenses/by-nc/3.0/ http://flossexperiences.wordpress.com 065C 6D79 A68C E7EA 52B3 8D70 950D 53FB 729A 8B17

3 6

[JOBS] Application Engineer at Guruji.com : PHP, Perl & MySQL
by Harish S 27 Jan '09

27 Jan '09

To Apply send a mail with your resume to : *harish AT guruji DOT com* *Application Engineer* Job Responsibilities You will be responsible for developing new features for the core search platform. The job includes writing PHP and Perl scripts to develop auxiliary applications for the search engine. You will have added advantage if you have working knowledge in MySQL database. You will be working in a fast paced environment in which you will be expected to have a quick grasp of new problems. Candidate's Profile You should have 1 to 5 years of experience developing web applications using PHP and Perl. You should have Bachelors degree in Engineering (Computer Science graduates are preferred) with good programming skills. You have to take initiative to identify bottlenecks and come up with solutions. You should have passion to learn and apply the new technologies on the job. Required Technical Skills Expertise in PHP, and Perl. Working knowledge of HTML, Linux, MySQL. Desired Skills: Javascript, CSS, AJAX, Flash, GIMP, Working knowledge of Web Servers (Apache,lighty..) Additional Skills: Python, XSLT Desired Experience * About 2 to 3 years in a systems, search or networking company. * Experience with distributed systems. * Research experience in advanced computing especially networking, data mining, and information retrieval. * Experience of working in Linux OS. To Apply send a mail with your resume to : *harish AT guruji DOT com* Regards Harish -- Computers are like air conditioners - They can't do their job properly if you open windows

1 0

[Announce] GNUnify 2009 13th-14th Feb
by Devendra Laulkar 27 Jan '09

27 Jan '09

Hi all, GNUnify is an annual conference on FOSS organised by Symbiosis Institute of Computer Studies and Research (SICSR) in association with the Pune GNU/Linux Users Group (PLUG). We have techie talks, workshops, Q&A sessions and installfests. We have a special focus on FOSS in academia this year. You can find more details of the same at http://gnunify.in/ On behalf of all pluggies and organisers I would like to invite you to this event. There are no fees required for participating in the event, however registration is required beforehand. Delegate registrations are open at http://gnunify.in/ -Devendra Laulkar. -- www.laulkar.com

1 0

http1.1 in squid3.0
by sameer shinde 27 Jan '09

27 Jan '09

Hi All, Is squid3.0 HTTP/1.1 compliant? We've some websites to access which are on http1.1 The vendor says, as squid is not http1.1 compliant, the site may not work properly. If this is true, can anyone suggest me some work arround for it? ~~~~~~~~~~~~~~ Sameer Shinde. M:- +91 98204 61580 Millions saw the apple fall, but Newton was the one who asked why.

1 0

kget can resume downloads, other download managers can't
by Nikhil Marathe 27 Jan '09

27 Jan '09

Hi all, I've been having the annoying problem for quite a few days. kget is able to resume interrupted file transfers effortlessly. However wget, curl, axel, lftp when trying to resume, send the appropriate Range Header in HTTP/1.1 but fail to get a reply back. They wait for a long long time, still nothing. What is it that causes this, and is their a solution, so that I can use wget/curl for the downloads. Thanks, Nikhil

6 10

Choice of PDA
by Dr. Sharukh K. R. Pavri. 25 Jan '09

25 Jan '09

Hi, I am in the market for a new PDA. I've been using a Handspring Visor for the last several years but it's now really falling apart :(. Initially I used to sync it to linux using coldsync + conduits but later found jpilot and things were really cool. Two way sync was a dream. I presently also have a Sharp Zaurus 5500 but with openzaurus gone and angstrom developers not really interested in developing for the 5500, I have been looking at stuff on the net and can't really make up my mind. I need the following: Sync - both ways with a _linux desktop_ natively. This is essential. I'm willing to bust my chops setting it up the first time but I'd love to have a scenario where I just plug it in (or use wifi/bt) and it syncs. Calender - with reminder Contacts - with categories (this seems to nix the Nokia E51) Password wallet - again essential, preferably something I can read on my desktop too. At present I am using gnukeyring, which is perfect for the job. Ability to install other software - I have some medical books, and OTP generator amongst other things. Think kismet/wellenreiter. Cross platform - I'd love to be able to have the ability to sync my _next_ pda/smartphone with this desktop software and not have to manually copy over all my stuff. wifi/bt - either but both would be super. I have looked at the Nokia E51, and seen openmoko on the net. Any other choces ? any gotchas ? I have looked at opensync but it does not seem to be ready yet. I've looked at online sync services but I don't want to trust a 3rd party. I am using kubuntu at present. regards, Sharukh. -- Dr. Sharukh K R Pavri. Homoeopath, Linuxer. Anything is possible, unless it's not.

5 10

Wilson Kuriakose wants to chat
by Wilson Kuriakose 25 Jan '09

25 Jan '09

----------------------------------------------------------------------- Wilson Kuriakose wants to stay in better touch using some of Google's coolest new products. If you already have Gmail or Google Talk, visit: http://mail.google.com/mail/b-d42a67eb0-25eeca15a0-dfdadaca99bb5ab2 You'll need to click this link to be able to chat with Wilson Kuriakose. To get Gmail - a free email account from Google with over 2,800 megabytes of storage - and chat with Wilson Kuriakose, visit: http://mail.google.com/mail/a-d42a67eb0-25eeca15a0-98cd687078 Gmail offers: - Instant messaging right inside Gmail - Powerful spam protection - Built-in search for finding your messages and a helpful way of organizing emails into "conversations" - No pop-up ads or untargeted banners - just text ads and related information that are relevant to the content of your messages All this, and its yours for free. But wait, there's more! By opening a Gmail account, you also get access to Google Talk, Google's instant messaging service: http://www.google.com/talk/ Google Talk offers: - Web-based chat that you can use anywhere, without a download - A contact list that's synchronized with your Gmail account - Free, high quality PC-to-PC voice calls when you download the Google Talk client Gmail and Google Talk are still in beta. We're working hard to add new features and make improvements, so we might also ask for your comments and suggestions periodically. We appreciate your help in making our products even better! Thanks, The Google Team To learn more about Gmail and Google Talk, visit: http://mail.google.com/mail/help/about.html http://www.google.com/talk/about.html (If clicking the URLs in this message does not work, copy and paste them into the address bar of your browser).

6 7

Re: [ILUG-BOM] Connecting to net but apt-get does not work : Proxy setting removed, now it works!
by jitendra 25 Jan '09

25 Jan '09

Sorry for the trouble, friends. Problem solved. On Sun, Jan 25, 2009 at 3:00 PM, jitendra <jituviju(a)gmail.com> wrote: > > I get this response on a computer desktop at home. > The machine is connected on the internet thru a wireless router . On the > same router my laptop can access apt-get etc. > On this machine , with 8.10, internet works but not apt-get. > Can anyone help > > > sudo wget > http://wine.budgetdedicated.com/apt/sources.list.d/intrepid.list -O > /etc/apt/sources.list.d/winehq.list > --2009-01-25 14:45:59-- > http://wine.budgetdedicated.com/apt/sources.list.d/intrepid.list > Connecting to 192.168.1.1:8888... failed: Connection refused. > > > Earlier I got this > > : Failed to fetch >> http://archive.ubuntu.com/ubuntu/dists/intrepid/Release.gpg Could not >> connect to 192.168.1.1:8888 (192.168.1.1). - connect (111 Connection >> refused) >> > > > > -- > jitendra > > > > -- > jitendra > -- jitendra

1 0

Connecting to net but apt-get does not work
by jitendra 25 Jan '09

25 Jan '09

I get this response on a computer desktop at home. The machine is connected on the internet thru a wireless router . On the same router my laptop can access apt-get etc. On this machine , with 8.10, internet works but not apt-get. Can anyone help sudo wget http://wine.budgetdedicated.com/apt/sources.list.d/intrepid.list-O /etc/apt/sources.list.d/winehq.list --2009-01-25 14:45:59-- http://wine.budgetdedicated.com/apt/sources.list.d/intrepid.list Connecting to 192.168.1.1:8888... failed: Connection refused. Earlier I got this : Failed to fetch > http://archive.ubuntu.com/ubuntu/dists/intrepid/Release.gpg Could not > connect to 192.168.1.1:8888 (192.168.1.1). - connect (111 Connection > refused) > -- jitendra -- jitendra

1 0

Web cam problem in Debian etch
by Wilson Kuriakose 25 Jan '09

25 Jan '09

I am using Linux (Debian etch)for the last one year.I was very happy about until I purchased a Web cam of HP make. The Web cam is not working in my computer. What to do? Can anybody help me?

7 9

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

Linuxers