- Linuxers - lists.fsci.in

clustering
by abhijeet 31 Dec '01

31 Dec '01

hi I have been hunting for a problem definition for my b.e. project. Well, the search has been narrowed down to Web Server Clustering. I've seen the stuff at www.linuxvirtualserver.org and at lcic.org, But haven't been able to find a precise problem. Has anybody on the list worked in that area??? If yes could you direct me or suggest a few problem defn.s fit for us at b.e. level?? ciao abhijeet

7 17

Re: [ILUG-BOM] Linux Workshop
by Dinesh Shah 31 Dec '01

31 Dec '01

Hi Trevor, On Sun, 30 Dec 2001, Trevor Warren wrote: > > Hey luggers....... > > Ny1 wants to tag along...Also i need to get CD's ready > before the trip to give the students. Can u post the schedule? I may be able to tag along... > Trevor Warren With regards, -- --Dinesh Shah :-) Shah Micro System dinesh(a)indiamail.com http://dineshah.tripod.com Mobile: 98213-11906

3 3

squid MAC address configuration
by Hiten Desai 31 Dec '01

31 Dec '01

I found out this in man pages but I dont know how to do that anyone please tell me all the related commands and configurations for enabling mac address access control in squid thanks Hiten. To use ARP (MAC) access controls, you first need to compile in the optional code. Do this with the --enable-arp-acl configure option: % ./configure --enable-arp-acl ... % make clean % make If src/acl.c doesn't compile, then ARP ACLs are probably not supported on your system. __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com

1 0

quota problem
by Hiten Desai 31 Dec '01

31 Dec '01

Hi! I have set quotas on our mail server but the problem is there are more than one partition and if I set quota on home directory the mail is delivered in var/spool(another disk) directory please send some turnaround to the above problem Hiten. __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com

4 3

Re: [ILUG-BOM] quota problem
by ramesh.mallya＠ap.abnamro.com 31 Dec '01

31 Dec '01

can anybody tell me how to unsubscribe to this group???? Pablo Ares Gastesi <pablo(a)math.tifr.res.in>@mm.ilug-bom.org.in on 31/12/2001 01:57:57 PM Please respond to linuxers(a)mm.ilug-bom.org.in Sent by: linuxers-admin(a)mm.ilug-bom.org.in To: linuxers(a)mm.ilug-bom.org.in cc: Subject: Re: [ILUG-BOM] quota problem > but the problem is there are more than one partition > and if I set quota on home directory the mail is > delivered in var/spool(another disk) directory If I understand correctly, you want quotas in the mail partition as well. You can either set them up in that partition, or have the local mail delivery program to deliver mail to some file in the users' directories. Pablo. ---------------------------------------------------------------------- Pablo Ares Gastesi. School of Mathematics, TIFR, Mumbai 400 005, INDIA i Phone: 2152971, ext 2666 pablo(a)math.tifr.res.in http://www.math.tifr.res.in/~pablo/ Key fingerprint = 1A 7C 0A 22 5A 75 A4 78 62 6F 64 09 C1 A0 F7 E6 ---------------------------------------------------------------------- _______________________________________________ http://mm.ilug-bom.org.in/mailman/listinfo/linuxers

1 0

Testing Pine plz ignore
by Nikhil Joshi 30 Dec '01

30 Dec '01

1 0

4GB files in /lost+found
by Amish Mehta 29 Dec '01

29 Dec '01

Hi, Yesterday I was forced to hard reboot my Linux and when it passed through e2fsck it showed errors in lots of inodes. After going through fsck(where all I did is choose default answer) when I checked lost+found there were around 1200 files of size 4GB(HD space is 8GB). 'ls -l' doesnt show type of the file(it shows '?' question mark). Now if I try to remove those files it says 'Operation not permitted'. I also tried 'chmod 644' but that too fails. So now what are theses files? How do I remove these files? lost+found also shows several block and character devices, I was unable to remove those too. Is there a separate command say 'rmnod' to remove such files? Also my harddisk is NOW showing 1GB free, as far as I knew it only had 200MB space left, does it mean I have lost the files? Can this happen? I was under impression that any unattached inodes go to lost+found. Also there can't be 800MB of data open at time of reboot that all get corrupted and lost. But suprisingly all daily operations seem to be working fine. So point is where did free space come from? What files were lost? How do I find? I am totally lost :-) Thanks for help. Amish. P.S. Kernel version is 2.2.17 and I am using the machine since 2 yrs and is reasonably stable.

3 2

DOS attack
by Hiten Desai 29 Dec '01

29 Dec '01

I m having dos attack on my apache web server which is also simeltenously having our imap as well as pop3 server have checked with top it some times of the day gives more cpu consumption and by uptime I came to know that there are no. of active users goes up from 3 to 4 (average) to 20 or more after checking httpd logs I came to know that someone is asking for *.exe files from different ips we have a consaltunt but he says he doesnt have any solution for the timebeing he says to stop and restart the httpd service when it happens do u have any comments we are having dedicated connection and around 500+ email users please infrom me if there are any monitoring tools for sendmail /dos attack /apache which can be monitored in real time thanks Hiten. __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com

7 8

Re: Re: [ILUG-BOM] relation of DNS and NFS/NIS
by akshaysalkar 28 Dec '01

28 Dec '01

so it means that depending on the situation or environment....NIS will be installed. linuxers(a)mm.ilug-bom.org.in wrote: On Thu, Dec 27, 2001 at 10:24:16AM +0530, Pankaj Jangid wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > On Thursday 01 January 1970 05:29, akshaysalkar wrote: > > > is it that if DNS is configured NFS/NIS is not at all required?? > > No. > DNS, NFS and NIS all these serves different purposes. > > DNS is used for mapping domain names to IP addresses. We can use that in our > development machines for Caching of these mappings. > > NFS is Networked File System. Using this we can mount some share on some other > networked pc on to some directory in our pc. > > NIS is uses for making a Windows NT like environment. Means a Common NIS > server will be used for authentication and all other machines will serve as > client machines (same as winnt network). Also we can do cascading here; > means there can be more then one NIS server in a network but only one will be > master and others -- slave servers. This funda is now adopted in in window > 2000 advanced server -- they call it Active directory hierarchy or something > like that. NIS (network information system or yellow pages as it was once known) existed when Windows NT was not even conceived. So comparing it with NT gives one the impression that NIS sort of imitates NT. The other way round may be true. Nagarjuna _______________________________________________ http://mm.ilug-bom.org.in/mailman/listinfo/linuxers Get Your Private, Free E-mail from Indiatimes at http://email.indiatimes.com Buy Music, Video, CD-ROM, Audio-Books and Music Accessories from http://www.planetm.co.in

2 1

[OT]indian teenager get CISSP
by Kishor Bhagwat 28 Dec '01

28 Dec '01

hi gys, Indian teenager gets the CISSP(Certified Information Security Systems Professional)...pretty stunning.. http://www.securityfocus.com/news/301 regards, kishor _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

4 4

writing C++ API programs in Linux?
by akshaysalkar 28 Dec '01

28 Dec '01

how to write C++ programs having X Windows API? ie. i wanted to do a project using C++ on Linux platform. but what is the API that should be used ? X-Windows is written in C isnt it? Get Your Private, Free E-mail from Indiatimes at http://email.indiatimes.com Buy Music, Video, CD-ROM, Audio-Books and Music Accessories from http://www.planetm.co.in

3 2

Re: [ILUG-BOM] Proposal for a Meet on 6th Jan
by Sameer D. Sahasrabuddhe 28 Dec '01

28 Dec '01

I can make arrangements for the meet in one of the KReSIT classrooms ... I have already taken permission from our acting Head for that. The classroom is equipped with networked PC and LCD projector. Can someone please make a listing of the agenda for the meet? SameerDS. -- MTech Student, Reconfigurable Computing Lab, KReSIT, IIT-Bombay _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

6 8

relation of DNS and NFS/NIS
by akshaysalkar 27 Dec '01

27 Dec '01

is it that if DNS is configured NFS/NIS is not at all required?? Get Your Private, Free E-mail from Indiatimes at http://email.indiatimes.com Buy Music, Video, CD-ROM, Audio-Books and Music Accessories from http://www.planetm.co.in

3 2

error message
by Raju Bathija 26 Dec '01

26 Dec '01

Hi, After installing RH 7.1 on a new hard disk, the following error message is displayed when the machine is booted: ++++++++++++++++++++++++++++++++++++ VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 236k freed hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC } hdb: DMA disabled ide0: reset: success Adding Swap: 530104k swap-space (priority -1) +++++++++++++++++++++++++++++++++++++++++ Is the message about BadCRC harmless or serious? -- -------------------------------------------------------------------------- Raju Bathija | bathija(a)tifr.res.in | http://theory.tifr.res.in/~bathija -------------------------------------------------------------------------- Linux, the choice | On Monday mornings I am dedicated to the of a GNU generation -o) | proposition that all men are created jerks. Kernel 2.4.2-2 /\ | -- H. Allen Smith, "Let the Crabgrass Grow" on a i686 _\_v | |

2 1

(no subject)
by Hiten Desai 26 Dec '01

26 Dec '01

Hi!can anyone tell me which would be the most stable version of sendmail and if someone has already written script for transferring mail from /var/spool/mail to /home/(user)/inbox i.e. overwriting it and zeroing the file which is at /var/spool/mail/(user) if anyone has a script please send me a link thanks Hiten. __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com

3 2

ILUG Meet
by Kunal Gangakhedkar 26 Dec '01

26 Dec '01

Hi There, I'll also like to join as a newbie, if allowed obviously. But not this time, 'coz my MCA - I sem exams are starting from 12th Jan. Maybe, I can participate in the next meet. I'd love to join. Is there any prerequisite for the meeting??? If yes, pls. let me know. Thanks, Kunal ------------------ In most countries selling harmful things like drugs is punishable. Then howcome people can sell Microsoft software and go unpunished? (By hasku(a)rost.abo.fi, Hasse Skrifvars) _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

2 1

Storing binary data in PostgreSQL
by Rahul Torvi 25 Dec '01

25 Dec '01

Hi All, I 've been using mysql but now I have transfered mysql database to PostgreSQL database. But while dumping the data, the binary records Could not be transferred. how can I store binary data in PostgreSQL database ??? Can u please help me out! Rahul T

1 0

Thinkpython.com
by Nagarjuna G. 25 Dec '01

25 Dec '01

I request all of you to read the preface of the book, if you haven't read it already: `How to Think Like a Computer Scientist: Learning with Python, by Allen Downey, Jeffrey Elkner and Chris Meyers. Link: http://www.ibiblio.org/obp/thinkCSpy/preface.htm After that you should also read the book. Nagarjuna

1 0

Re: [ILUG-BOM] XF86Config Modelines
by Vijay Joaquim Stevens 25 Dec '01

25 Dec '01

I have worked out an XF86Config file for ver 4.x. for sis6326 cards with accel options on- it gives excellent results >Subject: [ILUG-BOM] XF86Config Modelines > From: "J. T. D'souza" <jtdesouza(a)yahoo.com> > Date: Mon, 24 Dec 2001 07:52:52 +0530 > To: <linuxers(a)mm.ilug-bom.org.in> > >where have the modelines for X4.02 been relocated to. The >/etc/X11/XF86Config-4 does not have mode lines. > >jtdesouza(a)yahoo.com > > >_________________________________________________________ >Do You Yahoo!? >Get your free @yahoo.com address at http://mail.yahoo.com > >_______________________________________________ >http://mm.ilug-bom.org.in/mailman/listinfo/linuxers

3 2

Re: [ILUG-BOM] XF86Config Modelines
by Vijay Joaquim Stevens 25 Dec '01

25 Dec '01

I think I will because I have downloaded the technical papers from SIS, and I have a good idea of how the card works So how do I go about writing a howto - ie is there a specific format? > >Subject: Re: [ILUG-BOM] XF86Config Modelines > From: Philip S Tellis <philip.tellis(a)iname.com> > >Maybe you'd like to write this as a mini-Howto. I know that there are >many people who've had similar problems with 6326. Also, 6215 is still >unsupported in X4.1.0, so if anyone knows of any way to use it in 4, >that would be good, or someone could look at writing the driver. > >Philip > >-- >"Language shapes the way we think, and determines what we can think about." >-- B. L. Whorf > > >Visit my webpage at http://www.ncst.ernet.in/~philip/ >Read my writings at http://www.ncst.ernet.in/~philip/writings/ > > MSN philiptellis Yahoo! philiptellis > AIM philiptellis ICQ 129711328 > >_______________________________________________ >http://mm.ilug-bom.org.in/mailman/listinfo/linuxers

5 4

Re: [ILUG-BOM] XF86Config Modelines
by Vijay Joaquim Stevens 24 Dec '01

24 Dec '01

I'm sorry but my information was incorrect, I have checked and it is possible to specify modelines in the XF86Config BTW. A merry Christmas and a happy New year to one and all >AFAIK It is disallowed >First enable XAA, specify that you have only 4MB on your videocard >Turn on turboqueue and fast_vram and force the dacspeed to 175 you should see >a marked improvement in the cards performance. >If you are still having problems use XAAnopixmapcache option >it worked for me. >I will mail you the XF86Config file >>With X3.3.6 after tweaking modelines, I had a res of 1280x1024 24bpp with >>SIS6326 and samtel monitor. X4 gives a resolution of 1024 x 768 with bad >>displacements and "aspect ratio". >>So how do I specify the modeline or is it disallowed. >> >> >> >>_________________________________________________________ >>Do You Yahoo!? >>Get your free @yahoo.com address at http://mail.yahoo.com >> >>_______________________________________________ >>http://mm.ilug-bom.org.in/mailman/listinfo/linuxers > >_______________________________________________ >http://mm.ilug-bom.org.in/mailman/listinfo/linuxers

1 0

sendmail on 7.2.
by acharya＠dacafe.com 24 Dec '01

24 Dec '01

Hi I am faceing 2 problems in red hat 7.2. 1) I cannot access the port 25 from other systems. From local its ok. No firewall is set. Can access other ports like 110, 143 ..... 2) Smart host also do not work. 3) any good site from where i can get help. (Some simple ones). Thanks. _____________________________________________________________

7 7

Configuration Prob. in DHCP
by Desai Ashish 24 Dec '01

24 Dec '01

Dear Luggers, Hi...2 all..... I m facing a problem for configuring 2 NIC for sharing my Internet Connection. Plz. find the complete problembelow. I m having 2 Machines. On one I m having Direct Cable Internet Connection...i.e. on Ethernet Technology. And that machine is having Linux 7.1 with Squid configured properly. I want to share that on 2-3 machines. All other machines having Win98. I want to set up its TCP/IP Configuration as Using DHCP Server and I want to make my first PC as DHCP Server for my Internal Network. For that matter I edited the file /etc/dhcpd.conf Its contents is as follows in /etc/dhcpd.conf subnet 192.168.0.0 netmask 255.255.255.0 { range 192.168.0.2 192.168.0.10; option subnet-mask 255.255.255.0; option broadcast-address 192.168.0.255; option routers 192.168.0.1; } subnet 202.131.99.81 netmask 255.255.255.0 { option broadcast-address 202.131.99.255; option routers 202.131.99.81; } And then I restart DHCP Service using "dhcpd -f" command. Then it has given me error as follows. Listening on Socket /etc/192.168.0.0 Sending on Socket /etc/192.168.0.0 No subnet declaration for eth0 (202.131.99.81) Please write a subnet declaration in your dhcpd.conf file for the network segment to which interface eth0 is attched. exiting. My Internet Service Provider has provided us some fixed IPs...I would like to mentioned that I already started Squid for Netsharing. After that I've provided all the machines IP address manually. And I can be able to browse the websites. But I want to make my Linux machine as DHCP server for my Internetwork. So, in above situation where the defect amy be left by me...???? Plz. suggese me some solution for that. Regards, [Ashish Desai] __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com

2 1

Re: [ILUG-BOM] XF86Config Modelines
by Vijay Joaquim Stevens 24 Dec '01

24 Dec '01

> AFAIK It is disallowed First enable XAA, specify that you have only 4MB on your videocard Turn on turboqueue and fast_vram and force the dacspeed to 175 you should see a marked improvement in the cards performance. If you are still having problems use XAAnopixmapcache option it worked for me. I will mail you the XF86Config file >With X3.3.6 after tweaking modelines, I had a res of 1280x1024 24bpp with >SIS6326 and samtel monitor. X4 gives a resolution of 1024 x 768 with bad >displacements and "aspect ratio". >So how do I specify the modeline or is it disallowed. > > > >_________________________________________________________ >Do You Yahoo!? >Get your free @yahoo.com address at http://mail.yahoo.com > >_______________________________________________ >http://mm.ilug-bom.org.in/mailman/listinfo/linuxers

3 2

Wine
by Vijay Joaquim Stevens 24 Dec '01

24 Dec '01

http://www.lindows.com/ Is wine stable enough yet?

1 0

Bad major or minor number
by J. T. D'souza 24 Dec '01

24 Dec '01

Distro RH6.2 (zoot i think) Mount -t vfat /dev/hda1 /win results in unable to mount /dev/hda1 bad major or minor number ls -l /dev/hda shows major as 3 and minor as 0 (3, 1 in case of hda1) which afaik is correct. This is a 17gb disk on a machine with bios which can read only 8 gb. Exceept for the above problem linux occupying the upper 8gb works happily. I wanted to move some stuff from the ext3 partitions on to the vfat partitions before installing woody. jtdesouza(a)yahoo.com _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

2 1

XF86Config Modelines
by J. T. D'souza 24 Dec '01

24 Dec '01

where have the modelines for X4.02 been relocated to. The /etc/X11/XF86Config-4 does not have mode lines. jtdesouza(a)yahoo.com _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

2 1

Wanted Linux professionals
by Anand Iyer 24 Dec '01

24 Dec '01

A company in Thane requires people with Linux expertise: Skills required: Linux installation, package selection, kernel config (added advantage), networking. Loading new hardware in real time system. Loading device drivers (provided by card vendor). Troubleshooting and ability to fix bugs. C/C++ programming on Linux platform for real time applications. Other skills added advantage. Contact along with this mail: prolific(a)bom3.vsnl.net.in <mailto:prolific@bom3.vsnl.net.in> Anand

2 1

squid
by acharya＠dacafe.com 22 Dec '01

22 Dec '01

Hi all 1) Can squid direct all the http request to another proxy. If yes how. 2) Can I block certain sites. Deny user from browsing some site. 3) Can blocking be user based. like some to denyed and other allowed. Hopeing for positive anws.... Thanks priyadarshi _____________________________________________________________

2 1

Ext3
by J. T. D'souza 22 Dec '01

22 Dec '01

Seems that the VM change in 2.4.10 and later is the cause of problems related to ext3. Read on. http://linuxjournal.com/article.php?sid=5676 jtdesouza(a)yahoo.com _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

1 0

needed debian CDs
by Dr . Sharukh K . R . Pavri . 22 Dec '01

22 Dec '01

I need the debian woody Cds. Where can I get a set ? Seascope folks only seem to have potato. regards, Sharukh. btw I am in south Mumbai. -- Dr. Sharukh K. R. Pavri. Mumbai, India.

3 2

Windows/Linux IP forwarding?
by Satya 22 Dec '01

22 Dec '01

Here's the situation: Net DSL Windowsbox LAN(dhcp) Linuxbox The LAN, naturally, has a 192.168.0.0 range of IPs (I think it's a class C). The DSL modem is connected to the Winbox on USB and the LAN is a 5-port hub supporting a windows network, with my Linux box (say hello to gort, folks) creeping in using dhcpd. The Linux box, and any box on the LAN, can access everything. I think the Net cannot access anything but the Windows box on the DSL modem (see <http://gort.cjb.net/>. That's the Winbox.). Now I need POP3 (and HTTP et al, if possible) access to the Linux box from the outside world. IP forwarding is enabled on the Winbox. What do I do now? PS: Can I get a static IP on the internal network with minimal changes to the other boxen? -- Satya. <URL:http://satya.virtualave.net/> US-bound grad students! For pre-apps, see <URL:http://quickapps.cjb.net/>

4 8

Ext3 - lots more to improve
by Bhushan Tiwari 22 Dec '01

22 Dec '01

File System | Max. file system size | Block sizes | Max. file size __________________________________________________________________________________________________________________ XFS | 18 thousand petabytes | 512 bytes to 64KB | 9 thousand petabytes __________________________________________________________________________________________________________________ JFS | 512 bytes blocks | 512, 1024, 2048, | 512 Tb with 512 bytes blocks | 4 petabytes | 4096 bytes | 4KB blocks / 32 petabytes | | | 4 petabytes with 4KB blocks __________________________________________________________________________________________________________________ ReiserFS | 4GB of blocks, 16 Tb | Up to 64KB | Currently fixed 4KB | | | 4GB, 2^10 petabytes in ReiserFS (3.6.xx) __________________________________________________________________________________________________________________ Ext3FS | 4Tb | 1KB-4KB | 2GB __________________________________________________________________________________________________________________ Note : 1024Gb = 1Tb, 1024Tb = 1Eb, 1024Eb = 1Pb -- ßhushån Tïwårï

2 1

RE: ipsec
by Vikram Rangnekar 21 Dec '01

21 Dec '01

Message: 6 From: "Kishor Bhagwat" <aaaaarrrgghhh(a)yahoo.com </ym/Compose?To=aaaaarrrgghhh(a)yahoo.com&YY=56596&order=down&sort=date&pos=0>> To: <linuxers(a)mm.ilug-bom.org.in </ym/Compose?To=linuxers(a)mm.ilug-bom.org.in&YY=56596&order=down&sort=date&pos=0>> Subject: Re: [ILUG-BOM] SecNet Date: Mon, 17 Dec 2001 09:07:18 +0530 Reply-To: linuxers(a)mm.ilug-bom.org.in </ym/Compose?To=linuxers(a)mm.ilug-bom.org.in&YY=56596&order=down&sort=date&pos=0> ----- Original Message ----- From: Vikram Rangnekar <vicky(a)wiw.org </ym/Compose?To=vicky(a)wiw.org&YY=56596&order=down&sort=date&pos=0>> To: <philip.tellis(a)iname.com </ym/Compose?To=philip.tellis(a)iname.com&YY=56596&order=down&sort=date&pos=0>> Sent: Monday, January 14, 2002 9:04 AM Subject: [ILUG-BOM] SecNet > Hi philip, > Feeling slightly disappointed that I didnt know about SecNet in time > I would have loved to talk on the IPsec implementation I'm working on How about enlightening us at the next LUG meet?Would love to hear abt it! Sure ! Thanks for the invitation I'll be there :) regards, kishor

3 3

Re: [ILUG-BOM] [OT] cyberoam client logon algorithm
by Amish Mehta 21 Dec '01

21 Dec '01

Kishor Bhagwat wrote: > >>From the readings i took, I can only see the timestamp(millis since Jan '70) >and no key, just my adapter address always. Are you sure that is ur adaptor address? Do winipcfg and tell me. Is it 52:54:05:FE:D7:24? >My password is just one character...not sure which 3 digits I shld be >looking at! In ur example 1008824941242 is encrypted pwd 1008824941 242 ^^^^^^^^^^ ^^^ Timestamp 3 digit no representing ur passwd probably based on time, IP and h/w address Pls see attached txt file in my earlier mail Amish.

2 1

Re: Opening in HP Bangalore (fwd)
by N.a.v.i.n..D.h.a.n.u.k.a. 20 Dec '01

20 Dec '01

Ya!! : ) Its prernaarun(a)yahoo.com -- "If you're smart, you'll be humble. There always is somebody who hasn't read a book and knows twice as much as you do." -- David Duchovny in Readers' Digest ----- Original Message ----- From: <ranjeet(a)nttindia.com> To: <navin(a)linuxcampus.net> Sent: Thursday, December 20, 2001 6:16 PM Subject: Opening in HP Bangalore (fwd) > yep .. navin writing u offlist... > > > i'm interested ... but u have forgotten to give the contact email id ... > > ranjeet _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

2 1

Re: Opening in HP Bangalore
by N.a.v.i.n..D.h.a.n.u.k.a. 20 Dec '01

20 Dec '01

----- Original Message ----- From: Prerna To: navin_dhanuka(a)yahoo.com Sent: Thursday, December 20, 2001 3:37 PM Subject: Opening in HP Bangalore Hi This mail comes to you from a well known recruitment company in Bangalore. We got your reference from a friend saying that you work on Unix / Linux. Actually we are looking for Unix and Linux professionals for HP in Bangalore. Ideal candidate will be one who has worked on Unix or Linux Internals and has good knowledge of C and has worked on development and testing .One will need to work on features such as sceurity, managability and availability on Unix or Linux. The projects are on latest area such as CIM and WBem. Please let us know if you will be interested in this opening also do send us your CV and please do not forget to mention your date of birth. Please feel free to get back to us for any clarifications. Hope to hear from you soon..... Thanks & Regards Prerna. _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

1 0

Re: [ILUG-BOM] [OT] cyberoam client logon algorithm
by Amish Mehta 20 Dec '01

20 Dec '01

Hi, Probably I shouldnt post this here but this looks to be best source for good crackers. :-). Just last sunday i was trying to figure out how cyberoam client encrypts password, but I failed :-). Here is sample file attached, u can open in Excel as tab sepatated file and 'text' formatting of all fields instead of general formatting. Basically first field is timestamp and then each of passwords character is replaced by 3 digit number based on some algorithm. There is one more key probably used and I dont know if it is related to adaptor address. In my case its 00:50:BA:8D:42:F4. This exists in all authentication requests.(see sample) The 3 digit number seems to change with time as its the only thing changing, rest known keys remaining the same. If somebody wants to reverse engineer the client I can send them the exe(setup too) if its legal to do so(is it?). Once algorithm is known, I will try to come up with Linux client as early as possible. Thanks. Amish. l o f e r 1008393054 245 078 003 203 195 q w e r t y 1008393043 014 205 213 164 121 254 1008393166 251 198 207 201 151 176 1008393170 011 016 123 052 245 179 1008393174 237 125 105 007 247 160 1008393573 162 122 154 189 007 140 a b c d x y z 1000095839 009 242 068 010 084 145 255 1000095787 229 043 090 137 000 135 147 1008392304 104 214 145 142 233 039 066 1008392340 086 130 243 248 236 047 229 1008393178 244 123 000 160 107 030 112 1008393576 006 069 117 070 173 068 201 e f g h i j k l 1008392325 066 201 111 194 167 115 189 011 00:50:BA:8D:42:F4 This key may have been used in algorithm. 00-40-F4-27-24-12 This is my Adapter address, dont know if it is used in algorithm or is related to above key. 172.16.161.2 This is my IP address, which may also have been used. This is the sample request sent. 172.16.161.2.1157 > 172.16.1.1.6060: udp 112 0x0000 4500 008c 3f05 0000 4011 4138 ac10 a102 E...?...@.A8.... 0x0010 ac10 0101 0485 17ac 0078 101b 2131 3132 .........x..!112 0x0020 0061 6d69 7368 0000 0000 0000 0000 0000 .amish.......... 0x0030 0000 0000 0000 0000 0000 0000 0000 0031 ...............1 0x0040 3030 3030 3935 3831 3630 3937 3132 3431 0000958160971241 0x0050 3237 0000 0000 0000 0000 0000 0000 0000 27.............. 0x0060 0000 0000 0000 0000 0000 0000 0000 0000 ................ 0x0070 0000 0000 0000 0000 0000 0030 303a 3530 ...........00:50 0x0080 3a42 413a 3844 3a34 323a 4634 :BA:8D:42:F4

2 1

Distro Mania
by J. T. D'souza 20 Dec '01

20 Dec '01

Redhat is suing those who copy and sell RH distro's as RH. So watch out all u "el cheapos". However imho RH is entitled to protect it's brand name and must take to court those who distribute RH copies as RH in an attempt to hijack it's brand equity. But that would ironically make distros like AL legitimate and reduce RH's brand exposure (so generously being pushed by the guys who distribute copies). Besides the Pandora's box of trademarked Logos, screens, manuals etc. Haaappy Litigation :-)). http://www.newsforge.com/article.pl?sid=01/12/18/1741238&mode=nocomment AAAHHHA Debian. _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

2 2

cyberoam client logon capture
by Kishor Bhagwat 20 Dec '01

20 Dec '01

hi, I'm attaching a captured logon session of the new cyberoam client.Its in tcpdump format, should open in ethereal. Amish,Krishnan...requested to have a look please! regards, kishor

1 0

COMMERCIAL: Vacancy for Linux SysAdmin
by Ninad Gupte 19 Dec '01

19 Dec '01

Hello Linux Masters, We have a requirement for Linux System Administrator. The key responsibilities and hence the skill sets matching them are as follows: 1. Setting up Linux servers for Intranet and Internet environments 2. Good understanding of Linux filesystems and networking 3. Comfort in using command-line interfaces, and all commonly used commands with options 4. Apache, Sendmail/Qmail, Samba, DNS, Tomcat Hands-on expertise 5. Shell scripting, Perl, MySQL, PHP, C, HTML proficiency 6. Good Communication Skills while interacting with Clients 7. Flair to pickup newer technologies and quick understanding 8. Willingness to work for long hours if the situation warrants There will be ample work available to the selected person. It will only be dependant on how much the person can grasp and get a grip on. When the System Administration tasks are finished, the person will be occupied with the development on GUI interfaces for end-users, and automation of various tasks by way of scripting. The candidate may not necessarily have work experience, but must have been using Linux comfortably for atleast a year. About the company: Interpole Solutions is a Inter-networking solutions company, having a presence in India for over 4 years, with its office in Mumbai. The company has been hosting websites on its servers across 6 datacenters in India and USA on Linux and Windows 2000 platforms, providing specialised solutions for some clientele. The company also undertakes turnkey web development projects on a wide array of technologies for its clients in India and UK. Almost round-the-clock and efficient support have been some of the key factors of the company. Candidates interested for the above position may submit their resume to hr(a)interpole.net Regards, Ninad Gupte Interpole Solutions

1 0

Re: [ILUG-BOM] LUG MEET ?
by Sudhakar Dayal 19 Dec '01

19 Dec '01

By the way when is the next meet. Where are last meetings MOM ? i.e Minutes Of Meeting DAYAL >From: "Nagarjuna G." <nagarjun(a)hbcse.tifr.res.in> >Reply-To: linuxers(a)mm.ilug-bom.org.in >To: linuxers(a)mm.ilug-bom.org.in >Subject: Re: [ILUG-BOM] LUG MEET ? >Date: Thu, 13 Dec 2001 13:47:43 +0530 > >On Fri, Dec 14, 2001 at 04:46:36PM +0530, Bhushan Tiwari wrote: > > > > is there a meet this sunday ? > > > >Very unlikely, I am anyway going to Hyd tomorrow. > >Nagarjuna >_______________________________________________ >http://mm.ilug-bom.org.in/mailman/listinfo/linuxers > _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com

2 1

ccicmumbai.com||CyberCrime Investigation Cell uses Windows Logo on the Web-Site
by N.a.v.i.n..D.h.a.n.u.k.a. 19 Dec '01

19 Dec '01

Hi, Whats the Windows Logo doing on the Home Page & Template of all the pages of the site. >I guess they are only capable of cracking crimes against M$FT !! Anyone >smart enough to hack into a *nix machine must be way out of their league!! >;-) >But seriously it's pretty dumb of them to use that .. it's a standard FP >template by looks of the meta tag. ><META content="Microsoft FrontPage 4.0" name=GENERATOR> ><META content=FrontPage.Editor.Document name=ProgId> ><META content=none name="Microsoft Theme"> >I wonder if they actually paid for it!! ;-) Maybe we should report them to >the BSA ! The ::::Our Team:::: Section I wonder how the Webmaster "Mr. Shaileshkumar C. Zarkar, (Chief Executive Officer, SK InfoTech Pvt.Ltd. Shiv Krupa, Gr. Flr., Near Gaundevi Mandir,Station Road, Vidyavihar (W), Mumbai-86") got the design & layout approved from an Advisory Committee which contains names like: 1. SELF-PROCLAIMED Internet Guru of India - Shri. Vijay Mukhi, Computer Institute, Everest Bldg., 3rd Floor, Near Air Condition Market, Tardeo, Mumbai. >>Hehehe... 2. Shri. Harish Mehta, Managing Director, NASSCOM, c/o. 62, ^^^^^^^^^^^^^^^^^^^^^^^^^ MIDC,13thStreet, Andheri (East), Mumbai_93. >>Why am I not very surprised? 3. Shri. Deepak Pathak, Director, Kenwal Rekhi Institute of Information, Technology, I.I.T., Pawai, Mumbai >>At least an address - and an outfit - with crediblity 4. Shri. Atul Nisar, Managing Director, "APTECH", MIDC, Marol, Andheri (East), Mumbai. >>Well, that counterbalances things ... Aptech, that hive and breeding ground >>of the clueless 5. Shri. D. Dutta, Chief General Manager (vig), Videsh Sanchar Bhavan, M.G.Road, Mumbai-1. 6. Shri. Vijay Chugh, Dy. General Manager (vig), Department of Banking Supervision, 2nd Floor, Centre-I, Reserve Bank of India, World Trade Centre, Cuffe Parade, Mumbai. 7. Shri. Amal Ganguli, Price Water House, Copper India, Sandoz House, 3rd Floor, Dr. Annie Beseant Road, Worli, Mumbai-400 018. 8. Shri. K.R.Ganpathy, Chief General Manager, Department of Information Technology, Centre Office Building, 14th Flr. S.B.Road, Colaba, Mumbai. 9. Shri. Ramnish, Dy. Supdt. of Police, Cyber Crime Investigation Cell, Criminal Bureau of Investigation, 5th Floor, Block-3, C.G.O. Complex, Lodhi Road, New Delhi-110003. 10. Shri. K.C. Choudhary, CEO, Indian Bank Association, 6th Floor, World Trade Centre No.1, Cuffe Parade, Mumbai-5 11. Shri. Amitab Kumar, Director Operations, Videsh Sanchar Nigam Ltd., M.G.Road, Fort,Mumbai. 12. Shri. Rajiv Vaishnav, Director, The Indus Enterpreneurs, Samruddhi Venture Park, C/o. Tufan Infotech India Pvt. Ltd. 4th Floor, Central MIDC Road, Andheri (E), Mumbai-400 093. 13. Shri. V.L. Mehata, Director Info-tech, MIEL e-Security Pvt. Ltd., Mukund Iron & Steel, LBS Road, Kamani, Kurla (East), Mumbai. >>e-security? 14. Shri. Nanoo Pampnani, CEO, Citibank, 5th Flr, Plot No. C-61, Bandra Kurla Complex, G-Block, Bandra (East), Mumbai-51. 15. Shri. Tushar Gandhi, Internet Users Club of India, Vijay Mukhis Computer Classes. Everest Building, 3rd Floor, Near Air Condition Market, Tardeo, Mumbai 16. Shri. Zahir J. Cama, CEO, India, HSBC, India Area Management Office, 52/60, M.G.Road, Fort, Mumbai. Also check www.netsol.com/cgi-bin/whois/whois?STRING=ccicmumbai.com&SearchType=do >>Why http when every *nix box around most likely has whois? :) >>"crofard market?" where the hell is that? Yep, there _is_ a Crawford Market >>somewhere around ... >>What a bunch of [umm... words fail me]... >>Having the whois info in the web design company's name, including all whois >>contacts is like "buying" a car but having it registered in the name of your >>car dealer. >>$ whois ccicmumbai.com >>ccic >> crofard market >> mumbai, MA 400001 >> IN >> Domain Name: CCICMUMBAI.COM >> Administrative Contact: >> manoj lohiya websol(a)sk4india.com >> ccic >> crofard market >> mumbai, MA 400001 >> IN >> Phone- IN >> Fax- >> Technical Contact: >> manoj lohiya websol(a)sk4india.com >> ccic >> crofard market >> mumbai, MA 400001 >> IN >> Phone- IN >> Fax- >> >> Record updated on 2001-05-10 02:00:28. >> Record created on 2001-05-10. >> Record expires on 2002-05-10. >> Database last updated on 2001-12-18 17:44:16 EST. >> Domain servers in listed order: >> DNS1.SK4INDIA.COM 202.71.136.148 >> NS3.NET4INDIA.COM 202.71.136.67 Navin, Kingsly & Suresh Ramasubramanian _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

2 1

Woody
by J. T. D'souza 19 Dec '01

19 Dec '01

Could somone lend / burn me Debian Woody and KDE debs. It's urgent - notice my mail client :-( My earlier installation was potato. Since I have to do a reinstall I might as well do it with woody and save the hassle of upgrading to 2.4xx. Pls phone me on 5770864, 5796698, 7693276. jtdesouza(a)yahoo.com _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

2 2

Fw: [LIG] [OT] eeek..somebody has gone crazy
by N.a.v.i.n..D.h.a.n.u.k.a. 19 Dec '01

19 Dec '01

----- Original Message ----- From: "Sayamindu Dasgupta" <unmadindu(a)Softhome.net> To: <linux-india-general(a)lists.sourceforge.net> Sent: Wednesday, December 19, 2001 1:23 AM Subject: [LIG] [OT] eeek..somebody has gone crazy > > guys, check out this piece of news > > http://www.newsbytes.com/news/01/173039.html > this one really crosses the limits > cheers > Sayamindu > > > _______________________________________________ > Linux-india-general mailing list > Linux-india-general(a)lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/linux-india-general _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

2 1

[linux-india-general-request@lists.sourceforge.net: Linux-india-general digest, Vol 1 #308 - 15 msgs]
by Nagarjuna G. 19 Dec '01

19 Dec '01

Maharashtra tops the list at linux counter: ----- Forwarded message from linux-india-general-request(a)lists.sourceforge.net ----- Dear LIG friends: Apparently only a small percentage of India Linux users have registered at http://counter.li.org/ But we could do with more. Please register yourself if you haven't done so already. Frederick You used to be registered with the Linux Counter at http://counter.li.org/ Where Linux users in India live The table is sorted by number of users divided by population No ID Place Pers P/Mpop People 1 IN:HP Himachal Pradesh 3 0.00 Unknown 2 IN:DL Delhi 164 0.00 Unknown 3 IN:AP Andhra Pradesh 115 0.00 Unknown 4 IN:GJ Gujarat 63 0.00 Unknown 5 IN:RJ Rajasthan 10 0.00 Unknown 6 IN:WB West Bengal 53 0.00 Unknown 7 IN:MH Maharashtra 478 0.00 Unknown 8 IN:MP Madhya Pradesh 22 0.00 Unknown 9 IN:KA Karnataka 286 0.00 Unknown 10 IN:TN Tamil Nadu 274 0.00 Unknown 11 IN:KL Kerala 84 0.00 Unknown 12 IN:UP Uttar Pradesh 84 0.00 Unknown 13 IN::Chandigarh Chandigarh 13 0.00 Unknown 14 IN:HR Haryana 18 0.00 Unknown 15 IN:PY Pondicherry 2 0.00 Unknown 16 IN:GA Goa 35 0.00 Unknown 17 IN:AS Assam 7 0.00 Unknown 18 IN:OR Orissa 17 0.00 Unknown 19 IN:BR Bihar 4 0.00 Unknown 20 IN:MZ Mizoram 1 0.00 Unknown 21 IN:CT Chattisgarh 1 0.00 Unknown 22 IN:JH Jharkhand 5 0.00 Unknown 23 IN:UA Uttaranchal 5 0.00 Unknown 24 IN:PB Punjab 12 0.00 Unknown -- ------------------------------------------------------------------------ nagarjun(a)hbcse.tifr.res.in www.hbcse.tifr.res.in/gn/ Key fingerprint = C1E2 1B8C 8E98 A697 68B7 ADAC E956 6D4B DE90 BF01

2 1

Chandra Narayanaswami's Lecture
by Vikram Rangnekar 18 Dec '01

18 Dec '01

I has gone to Candra Narayanaswami's lecture at TIFR today. He's the researcher from IBM wearable computing division who built the Linux powered watch. The talk was really good he explained stuff in good detail and showed a movie about the linux watch. He even passed a linux watch and the circuit inside the watch for everyone to see. The watch uses the Strong ARM processor by Cirus Logic it has 8 MB flash memory runs the 2.2 kernel with X11 R6 has a touch screen IRDA and RF interfaces for communication. the battery has hold up to 60 hours the coolest part of the watch was the 700 dpi Organic Light Emitting Display which is supposed to be the resolution of a laser printer the display is crytal clear and also saves power. Over all great lecture. Check out this guys site for more info on the watch http://www.research.ibm.com/people/c/chandras/ regards Vicky

1 0

Re: [ILUG-BOM] SecNet
by Mahesh Gharat 18 Dec '01

18 Dec '01

On Mon, 14 Jan 2002 Vikram Rangnekar wrote : > Hi philip, > Feeling slightly disappointed that I didnt know > about SecNet in time > I would have loved to talk on the IPsec implementation > I'm working on > unlike FreeSwan I'm writing it on top of the new > netfilter architecture > ( > 2.4) so no recompiles of the kernel the entire > IPSEC (ESP & AH) > handling will be a single module and the ISAKMP daemon > will be a > userspace program. Hello Vicky, Can you tell us more about your new IPSEC implementation? It will be a great topic to have a debate on. - Mahesh Gharat

1 0

nmap messages
by kishor bhagwat 17 Dec '01

17 Dec '01

hi, whenever i try the OS detection option of nmap, i get this message : sendto in send_tcp_raw: sendto(3, packet, 60, 0, ipaddr, 16) => Operation not permitted (where "ipaddr" is the target's ip address). The message repeats three times. naturally, nmap isnt detecting any OSes as of now. any ideas what the problem is?This happend on RH7.1... regards, kishor __________________________________________________ Do You Yahoo!? Check out Yahoo! Shopping and Yahoo! Auctions for all of your unique holiday gifts! Buy at http://shopping.yahoo.com or bid at http://auctions.yahoo.com

3 2

[OT] Secnet and Vijay Mukhi
by Aarjav Trivedi 17 Dec '01

17 Dec '01

Philip Thanks for the info on Secnet, it would be great if u could send me (or the list) a mail when its happening the next time. As far as Vijay Mukhi is concerned, in todays Bombay Times someone asked him, "Why is it not possible to install two Operating Systems on the same hard disk ?" To which he replied "Because those who make the OS dont want you to do so." Someone please teach him about Partitioning the hard disk. His column is sometimes more hilarious than Cyrus Broacha's. Maybe they are intentionally placed on the same page. :) Bye Aarjav __________________________________________________ Do You Yahoo!? Check out Yahoo! Shopping and Yahoo! Auctions for all of your unique holiday gifts! Buy at http://shopping.yahoo.com or bid at http://auctions.yahoo.com

2 1

SecNet
by Vikram Rangnekar 17 Dec '01

17 Dec '01

Hi philip, Feeling slightly disappointed that I didnt know about SecNet in time I would have loved to talk on the IPsec implementation I'm working on unlike FreeSwan I'm writing it on top of the new netfilter architecture ( > 2.4) so no recompiles of the kernel the entire IPSEC (ESP & AH) handling will be a single module and the ISAKMP daemon will be a userspace program. The only thing that really cheered me up was the Flynn Baba bashing :) I work with him on the Cyber Crime Cell as an advisor and I was pretty sick of him calling himself a network security specialist (I was suprised that he knew how to clear the IE cache ). Also I'm waiting around for my IBM linux programming contest results. Is there ANYONE ELSE ON THIS LIST who has taken part in the contest. (Known when the results r comming out ??) regards Vicky

5 6

Tiff image support in QT
by Rahul Torvi 17 Dec '01

17 Dec '01

Hi all, I am loading an image using QPixmap and successfully displaying the image in the client area of the application. But when I am working with TIF image, it is unable to load it in the QPixmap, TIFF format is not in the supported format list of QT, So when I searched, I got the following TWO options to support TIFF format in QT. First is QImageFormat's decoding procedure to install the new format. where you have to override DecoderFor, FormatName and Decode. Which I was unable to do, So any help in this case would be really appreciated. Secondly, I got the following code for defining the new format support. Which is crashing after the last line of the code. My code goes this way QImageIO::defineIOHandler( "TIF", // format name "\\x49\\x49\\x2A\\x01", // header-regexp 0, // binary format,text:"T" read_tif_image, // read-routine write_tif_image ); // write-routine QImageIO *myImageIO; myImageIO = new QImageIO( strFileName,"TIFF"/"TIF"); //tried with TIFF and TIF QIODevice *d = myImageIO->ioDevice(); QDataStream s( d ); const buflen = 24; char buf[buflen]; d->readBlock( buf, 4 ); // read signature Waiting for an early reply... Best Regards Rahul T.

1 0

Journal File systems
by Bhushan Tiwari 17 Dec '01

17 Dec '01

Very comprehensive explanation on JFSs http://www.linuxgazette.com/issue55/florido.html -- ßhushån Tïwårï

1 0

Linux LFS
by Bhushan Tiwari 17 Dec '01

17 Dec '01

Hi all, thought this would be helpful..... http://www.suse.de/~aj/linux_lfs.html -- ßhushån Tïwårï

1 0

: Re: [ILUG-BOM] [OT] Preliminary report on SecNet 2001
by girish h 17 Dec '01

17 Dec '01

You can try Astaro Firewal it includes Ipsec VPN & Pptp Vpn on Linux 2.4 Kernal. Its a German Product. For more details u can go on www.astaro.com Rgds Girish On Sat, 15 Dec 2001 Philip S Tellis wrote : > > Mr. Ambrish Kumar took the next lecture on IPSec, > touching on > implementations in windows and linux. There were some > doubts as to > whether the linux kernel has built in IPSec > compatibility or if it > requires a recompile. Maybe someone on the list can > shed some light on > this. No.Current Linux kernel does not have built in IPSec compatibility,because of the US regulation(NSA can decrypt upto only 64-bit encryption).IPSec allows much better and easy encryption than anybody can decrypt. Some Distrubutions made outside the US like Polish distribution does provide inbuilt IPSec. I have recompiled the Linux(2.4.12) with Freeswan-IPSec(1.91) and currently using it with 2048-bit RSA encryption for my VPN network.It gives me descent(and the most secure) performance over the cable connection. See follwing site for more info. http://www.freeswan.org/

1 0

Problem with 2 NIC
by Desai Ashish 16 Dec '01

16 Dec '01

Dear Luggers, Hi...2 all..... I m facing a problem for configuring 2 NIC for sharing my Internet Connection. Plz. find the complete problembelow. I m having 2 Machines. On one I m having Direct Cable Internet Connection...i.e. on Ethernet Technology. And that machine is having Linux 7.1 with Squid configured properly. I want to share that on 2-3 machines. All other machines having Win98. I want to set up its TCP/IP Configuration as Using DHCP Server and I want to make my first PC as DHCP Server for my Internal Network. For that matter I edited the file /etc/dhcpd.conf Its contents is as follows in /etc/dhcpd.conf subnet 192.168.0.0 netmask 255.255.255.0 { range 192.168.0.2 192.168.0.10; option subnet-mask 255.255.255.0; option broadcast-address 192.168.0.255; option routers 192.168.0.1; } subnet 202.131.99.81 netmask 255.255.255.0 { option broadcast-address 202.131.99.255; option routers 202.131.99.81; } And then I restart DHCP Service using "dhcpd -f" command. Then it has given me error as follows. Listening on Socket /etc/192.168.0.0 Sending on Socket /etc/192.168.0.0 No subnet declaration for eth0 (202.131.99.81) Please write a subnet declaration in your dhcpd.conf file for the network segment to which interface eth0 is attched. exiting. My Internet Service Provider has provided us some fixed IPs...I would like to mentioned that I already started Squid for Netsharing. After that I've provided all the machines IP address manually. And I can be able to browse the websites. But I want to make my Linux machine as DHCP server for my Internetwork. So, in above situation where the defect amy be left by me...???? Plz. suggese me some solution for that. Regards, [Ashish Desai] __________________________________________________ Do You Yahoo!? Check out Yahoo! Shopping and Yahoo! Auctions for all of your unique holiday gifts! Buy at http://shopping.yahoo.com or bid at http://auctions.yahoo.com

1 0

RE: [ILUG-BOM] mozilla problem
by Amarendra Godbole (Intl Vendor) 16 Dec '01

16 Dec '01

> /usr/X11R6/bin/mozilla: error while loading shared libraries: > > libgtk-1.2.so.0: cannot open shared object file: Input/output error > > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > What could the error message mean? A `shared object' file, as the name itself implies is the object file that is shareb by many programs. You have a bunch of them put up in /usr/lib. It is a DLL (dynamic linked library), which is linked at runtime. Your error suggests that GTK is not installed properly, try reinstalling it. Uninstall can be done with rpm -e <pkg name>. Then again install the GTK rpm, and yes, take care of the dependencies while install/uninstall process. Also, on a second thought, try replacing libgtk. HTH --amar -- Amarendra A. Godbole / Spare time LINUX Hacker / Microsoft ``Services For UNIX'' / These opinions are _MINE_.

5 4

Re: [ILUG-BOM] [OT] Preliminary report on SecNet 2001
by Mahesh Gharat 16 Dec '01

16 Dec '01

On Sat, 15 Dec 2001 Philip S Tellis wrote : > > Mr. Ambrish Kumar took the next lecture on IPSec, > touching on > implementations in windows and linux. There were some > doubts as to > whether the linux kernel has built in IPSec > compatibility or if it > requires a recompile. Maybe someone on the list can > shed some light on > this. No.Current Linux kernel does not have built in IPSec compatibility,because of the US regulation(NSA can decrypt upto only 64-bit encryption).IPSec allows much better and easy encryption than anybody can decrypt. Some Distrubutions made outside the US like Polish distribution does provide inbuilt IPSec. I have recompiled the Linux(2.4.12) with Freeswan-IPSec(1.91) and currently using it with 2048-bit RSA encryption for my VPN network.It gives me descent(and the most secure) performance over the cable connection. See follwing site for more info. http://www.freeswan.org/ -Mahesh Gharat

3 2

Need Help on Apache Virtual Host Config
by Kunal Gangakhedkar 15 Dec '01

15 Dec '01

Hi there, Could someone tell me how to configure virtual Hosts on Apache on localhost??? My main server is running as localhost, but I want to create a new site, mysite,say. I want to access both the sites. How do I do that??? Could someone mail me part of working httpd.conf as a solution for the above problem??? Thanks, Kunal _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

5 5

Re: [OT] Secnet 2001
by Aarjav Trivedi 15 Dec '01

15 Dec '01

Is Secnet an annual event at IITB ? Is it open for all ? (As in can an interested non-IITian engg student get in without getting bankrupt ? ;) ) Are the lectures basic, intermediate or advanced ? Thanks Aarjav __________________________________________________ Do You Yahoo!? Check out Yahoo! Shopping and Yahoo! Auctions for all of your unique holiday gifts! Buy at http://shopping.yahoo.com or bid at http://auctions.yahoo.com

3 2

Mounting of Novell 3.12 on linux6.2
by Girish Hanchate 15 Dec '01

15 Dec '01

Hi, Can any body help me in mounting netware server 3.12 on Redhat Linux 6.2. I know the command on Redhat linux 5.2 but if i try with same command on linux 6.2 it is not geeting mount. Rgds Girish __________________________________________________ Do You Yahoo!? Check out Yahoo! Shopping and Yahoo! Auctions for all of your unique holiday gifts! Buy at http://shopping.yahoo.com or bid at http://auctions.yahoo.com

2 1

[Seminar] Wearable Linux
by Nagarjuna G. 15 Dec '01

15 Dec '01

SCHOOL OF TECHNOLOGY AND COMPUTER SCIENCE TATA INSTITUTE OF FUNDAMENTAL RESEARCH RUNNING LINUX ON A WRISTWATCH PROTOTYPE Chandra Narayanaswami Chandra received his B.Tech. in Electrical Engineering from the Indian Institute of Technology, Bombay, and his M.S. and Ph.D. degrees in Computer and Systems Engineering from Rensselaer Polytechnic Institute. He currently manages a group on Wearable Computing that is investigating challenging issues in form factors, input devices, navigation, applications, user interfaces, and power management for wearable computing.

6 13

[OT] Preliminary report on SecNet 2001
by Philip S Tellis 15 Dec '01

15 Dec '01

I've been participating in the security and networking workshop at IITB for the last three days, and here's a little report on what's been happening there. There were lectures by our own Jaju. He spoke about different security attacks including IP spoofing, DoS, DNS spoofing, sniffing, session hijacking, etc. and demonstrated tools like nmap for port scanning. On the second day, Anil Gracias demonstrated how to analyse log files for patterns of probing and possible break ins. He demonstrated tools like snort, tripwire, and netsaint. Flynn Remedios - the advisor for the Mumbai police cyber crime cell - also spoke. He basically explained how to delete the history from Internet Explorer and how to give incorrect information when signing up for a yahoo account, and how he threatened yahoo.com with his influence with the Mumbai Police. He also told us a lot about his personal life and why he doesn't use Linux/Unix. Apparently, in 1991, when he was studying C/C++ under Vijay Mukhi, Mukhi said that Unix is for Eunuchs, and so from that day on he has been afraid to touch unix, possibly because he thinks it will make him one. My advice to anyone/any company who wants to hire him as a consultant. Just make sure you only consult him on how to walk around with one foot in your mouth. The third day was taken by Dr. Leena Chandran-Wadia, on SSL and the different kinds of message encryption/signing. Leena has an excellent command over the subject, and seemed to have done her homework not just on the subject, but also on the audience. In all, this was the best lecture of all. Mr. Ambrish Kumar took the next lecture on IPSec, touching on implementations in windows and linux. There were some doubts as to whether the linux kernel has built in IPSec compatibility or if it requires a recompile. Maybe someone on the list can shed some light on this. IPSec seems a very interesting topic, and those who have the opportunity should try it out. There's one more day to go for the workshop, I'll keep you'll posted. Philip -- Sometimes a feeling is all we humans have to go on. -- Kirk, "A Taste of Armageddon", stardate 3193.9 Visit my webpage at http://www.ncst.ernet.in/~philip/ Read my writings at http://www.ncst.ernet.in/~philip/writings/ MSN philiptellis Yahoo! philiptellis AIM philiptellis ICQ 129711328

1 0

OT- Win NT security evaluation
by Kishor Bhagwat 14 Dec '01

14 Dec '01

I've been studying aspects of Windows NT security, and I came across an interesting bit of information which i thought of sharing... There is a body called National Computer Security Center in the US Dept of Defense.They guys basically evaluate the security of computer systems and certify a _particular_configuration at a certain level from A to D, where A is the highest level of security. It seems that Windows NT was certified at C2 level on a Compaq ProLiant 2000, running Version 3.51 of NT, as per the Orange Book Now, surprise surprise, the Orange Book is for standalone systems only! Windows NT was never evaluated on the Red Book,which provides an interpretation of the security criteria for networked systems!!! There, now u guys know why its the favorite target.... kishor ps:of course, linux flavours are the second-most favourite...;-) (ducks for cover...) _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

2 3

mozilla problem
by Raju Bathija 14 Dec '01

14 Dec '01

Hello, Recently I installed rpm of mozilla in one of the machines. I get the following error message: +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ /usr/X11R6/bin/mozilla: error while loading shared libraries: > libgtk-1.2.so.0: cannot open shared object file: Input/output error ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ What could the error message mean? Bye. -- -------------------------------------------------------------------------- Raju Bathija | bathija(a)tifr.res.in | http://theory.tifr.res.in/~bathija -------------------------------------------------------------------------- Linux, the choice | Walk softly and carry a big stick. -- of a GNU generation -o) | Theodore Roosevelt Kernel 2.4.2-2 /\ | on a i686 _\_v | |

2 1

Re: [ILUG-BOM] HELP!: unusual filesystem crash
by Nikhil Karkera 14 Dec '01

14 Dec '01

On Wed, 12 Dec 2001 Mayuresh Bakshi wrote : > I was working on PCQ 7.1 (2.4 kernel) sometime back... What is "PCQ 7.1"? Is it a new distro? I have come accross this on the list a couple of times before too. I used to assume that maybe one accidentally might have been refering to "RH 7.1" as "PCQ 7.1", because maybe it was shipped with the PC Quest magazine. (??) Regards, Nikhil.

3 2

Longest Uptime
by Bhushan Tiwari 14 Dec '01

14 Dec '01

below is a link to the top 50 servers having longest uptime... Its very suprising that not a single Linux server is in the list !!!!! http://uptime.netcraft.com/up/today/top.avg.html -- ßhushån Tïwårï

5 4

Just test for my subscription
by Dinesh Shah 13 Dec '01

13 Dec '01

Hi, Pls ignore... This is a test msg to check my subscription to the lists... Sorry for the incovenience... With regards, -- --Dinesh Shah :-) Shah Micro System dinesh(a)indiamail.com http://dineshah.tripod.com Mobile: 98213-11906

1 0

error 17
by Abraham Mathew 13 Dec '01

13 Dec '01

Hi, I found your msg while surfing. Why dont you try setting Stupid mode = 1 (the default value is 0) in your /etc/wvdial.conf file for the isp that is troubling you with error 17 Regards Abraham Mathew LInux LOver wrote on Monday, October 22, 2001 > The serial loopback error occurs when the pppd program tries to execute > before a connection to the remote server is completed. In order to elimiate > this problem be sure to place the following in your chat script. > > > CONNECT 'CONNECT' \ I don't use chat scripts. I use wvdial or kppp. I'm not aware of how to use chat scripts. What do I do? > regards > lilo Thanks a lot. Regards, Kinjal Sonpal

1 0

Re: [ILUG-BOM] [OT] Hello !
by Vijay Joaquim Stevens 13 Dec '01

13 Dec '01

>> Returning back to the list after a long time. Greetings to all. > ^^^^^^^^^^^^^^ > >Kind of redundant that isn't it? `Return' implies back. > Actually if you check the latest additions to colloquialisms you will find that "returning back" is perfectly correct. However you are right in pointing out the redundancy of the word back

1 0

LUG MEET ?
by Bhushan Tiwari 13 Dec '01

13 Dec '01

is there a meet this sunday ? -- ßhushån Tïwårï

2 1

[OT] Hello !
by Amarendra GODBOLE 13 Dec '01

13 Dec '01

Hello All, Returning back to the list after a long time. Greetings to all. Cheers, --amar

3 2

Samba help....
by Rahul Torvi 12 Dec '01

12 Dec '01

Hi All, I had set up a samba server with users having certain permission, Now what I want to do is to a group of users i need to give access to create file but they should not be allowed to delete the file. Is this possible....HOW???? Thanks in advance Best Regards Rahul T.

2 1

*nix Comparison
by Bhushan Tiwari 12 Dec '01

12 Dec '01

http://unix-guide.addr.com/unixguide.shtml -- ßhushån Tïwåri

1 0

NT vs Linux security model
by Kishor Bhagwat 12 Dec '01

12 Dec '01

hi guys, anyone know of an article comparing Windows NT's security model with that of Linux/unix systems? its kinda urgent.... regards, kishor "If at first you don't succeed, then skydiving is not for you.." _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

2 1

Red Hat Certification exam
by Shankar I. 12 Dec '01

12 Dec '01

Hi, The Red Hat Certification exams are being held at various 5 locations currently, at Mumbai, Delhi, Bangalore, Chennai and Hyderabad. The venue is at STG international training centre, who is also the Red Hat Training partner for the RHCE courses. You can visit our website www.in.redhat.com for more details on the examination schedule and also information on the RHCE certification process. You can also reach me at the following address : Red Hat India, 133, Mittal Towers, B Wing, 13th floor, Nariman point, Mumbai - 400 021 Phone : 91 22 2853452 91 22 2856182 Thanks, Regards, Shankar Iyer Manager Training. ----- Original Message ----- > From: "Un|tZ" <licicon(a)yahoo.com> > To: <linuxers(a)mm.ilug-bom.org.in> > Sent: Tuesday, December 11, 2001 2:38 PM > Subject: [ILUG-BOM] rhce exam in bombay ? > > > > hello friends, > > > > i am hoping that any of you would know the address of the RedHat office in > > Bombay - India. It seems that NIIT has stopped conductng RHCE exams. And > > they say that the exams are being conducted by the RedHat office in > Bombay. > > Any contact details of the office in Bombay.? Please do share it with me. > > > > Thanking you > > > > Dharmesh > >

1 0

samba help
by Rahul Torvi 12 Dec '01

12 Dec '01

Hi All, I had set up a samba server with users having certain permission, Now what I want to do is to a group of users i need to give access to create file but they should not be allowed to delete the file. Is this possible....HOW???? Thanks in advance Best Regards Rahul T.

1 0

mail prob
by Satpal Ramgadia 12 Dec '01

12 Dec '01

hiee previously i was able to get mails to root when every any process copmpletes or server start or shutdown but after i clean reinstalled server with minimum options i m able to send mail thru mail command but unable to get messages in root mail box of system processes i installed sendmail also but this is the prob before i was able to get mails in root mail box i use to type "mail -f /var/spool/mail/root" to read mails right now i m getting mails but not of server process only thru users i need to get mails of server process also in root mail box like before what could be the solution? Thanx Satpal ___________________________________________________________________________ Visit http://www.visto.com. Find out how companies are linking mobile users to the enterprise with Visto.

1 0

[OT] [Vim] cindent from command line
by Manish Jethani 11 Dec '01

11 Dec '01

Any idea how I can auto indent (using cindent) from the command line? I'm writing a shell script to indent all my source files. This is the core of it: for f in $@; do vim -f $f +"set tw:80" +"set ts:4" +"set sw:4" \ +"set cindent" \ # ... now what? +"wq" done Now I want to add the command for indenting. The problem is that '=' won't work here (there's nothing like ':,%='). I can specify a range, but what command to apply to the range? One thing is this - ':,% !indent' - will indent a C file, but I really need this for Java (and the vim built-in indent, the = command, works perfectly for Java). Any ideas? How do people auto indent their Java/Perl files _from the command line_ (without manually doing gg=G in Vim for each file)? Manish

1 0

Any problems in delivery?
by Nagarjuna G. 10 Dec '01

10 Dec '01

If any of you experienced any problems in delivery of the mails of the list, do let me know off list. Nagarjuna

1 0

Re: [ILUG-BOM] Nautilus and gnome-vfs
by Sameer D. Sahasrabuddhe 10 Dec '01

10 Dec '01

Philip wrote: >It works correctly in the ximian packages. Hmmmm ... gotta check out how well ximian and apt-get get along ... SameerDS. _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

3 2

[announce] Sendmail howto - v1.1
by Philip S Tellis 10 Dec '01

10 Dec '01

Just announcing that the new version of my sendmail header/envelope rewriting howto is out, available at db.ilug-bom/lug-authors/philip/docs/ Includes a patch for the m4 macros, so you don't need to edit sendmail.cf anymore. Philip -- "The great Morpheus. We meet at last." "And you are." "A Smith. Agent Smith." "You all look the same to me." -- Agent Smith and Morpheus, "The Matrix" Visit my webpage at http://www.ncst.ernet.in/~philip/ Read my writings at http://www.ncst.ernet.in/~philip/writings/ MSN philiptellis Yahoo! philiptellis AIM philiptellis ICQ 129711328

1 0

Nautilus and gnome-vfs
by Sameer D. Sahasrabuddhe 07 Dec '01

07 Dec '01

I recently installed Nautilus on my Debian woody system ... but it seems to be missing a few pieces. It cannot render html pages on its own. Clicking on Help->User Manual, the html source of the page gets displayed instead of being renderred correctly. Here are the error messages that Nautilus keeps throwing up: ** WARNING **: Can't find description even for "x-directory/normal". This probably means that your gnome-vfs.keys file is in the wrong place or isn't being found for some other reason. ** WARNING **: No description found for mime type "text/html" (file is "/"), please tell the gnome-vfs mailing list. And similar warnings for other mime types ... I checked for /usr/share/mime-info/gnome-vfs.keys and it is in the right place. Since I am using Debian, I am pretty sure that apt has taken care of all dependencies ... What could have gone wrong??? SameerDS. ===== -- MTech Student Reconfigurable Computing Lab KReSIT, IIT-Bombay __________________________________________________ Do You Yahoo!? Yahoo! GeoCities - quick and easy web site hosting, just $8.95/month. http://geocities.yahoo.com/ps/info1

4 6

[OT] Pipes & redirection doubt
by Kinjal Sonpal 07 Dec '01

07 Dec '01

Dear friends, While going thru' the chapter of Pipes & Redirection from the *The Unix Programming Environment* (the famous yellow book by Kerninghan, et al) I read that when we use redirection, the system uses some temporary files to accomplish the task. Whereas by using pipes, the overhead of temp. files can be avoided. Can someone throw some more light on it? Like, why shud there be requirement of temporary files, where are those temp. file stored? I tried to find some more details on it in the docs as well as on the net, but the search wasn't very much fruitful. Thanks in advance. Warm Regards, $ sonpal -kj _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

3 2

unsubscribe
by Veena Gudi 06 Dec '01

06 Dec '01

-----Original Message----- From: Sachin Dabir [mailto:sachin@redhat.com] Sent: Wednesday, December 05, 2001 2:35 PM To: linuxers(a)mm.ilug-bom.org.in Subject: Re: [ILUG-BOM] [OT-News] Keral State GOV. Policy We are doing our best to get ONGC adopt Linux..!! Cheers...!! Ravindra Jaju wrote: > On Wed, Dec 05, 2001 at 01:41:23PM +0530, Parag Mehta wrote: > > HI All, > > > > worth meniotning to read the kerala state governemtn policy which can > > be found at > > http://www.keralagov.com/ITpolicy.htm > > > > read the 15th point which describes the ope/free software and simputer. > > Hi. > > I'm a bit confused about the [OT] posts in the past few days. Is the above > considered [OT]? > > I'd also like to point to a news piece in today's TOI (Mumbai) which says > that OIL will spend close to 800 crores for IT infrastructure. > > I hope our money doesn't end up in the coffers of the rich M$ already, and > keep OIL ever-dependent on M$, in turn, increasing the prices of our fuel .. > etc. ;-) > > So, can we do something to contact them and inform them about GNU/Linux and > stuff? Does anyone know? > > Cheers! > > -- > jaju > _______________________________________________ > http://mm.ilug-bom.org.in/mailman/listinfo/linuxers -- Sachin Dabir Head - Enterprise Sales Redhat India Pvt. Ltd. Ph. +91- 22- 285 3452 / 6182 mobile : +91 98213 26144 www.in.redhat.com ------------------------------------------- Providing solutions for Linux based systems -------------------------------------------- _______________________________________________ http://mm.ilug-bom.org.in/mailman/listinfo/linuxers

1 0

[OT-News] Keral State GOV. Policy
by Parag Mehta 06 Dec '01

06 Dec '01

HI All, worth meniotning to read the kerala state governemtn policy which can be found at http://www.keralagov.com/ITpolicy.htm read the 15th point which describes the ope/free software and simputer. best regards, parag mehta ilug-bom list admin linux india webmaster

5 4

Everybuddy users
by Philip S Tellis 06 Dec '01

06 Dec '01

If anyone is using everybuddy, then I have a patch that fixes a few bugs in the yahoo code, and also adds a login invisible option in preferences for yahoo. This patch is against the current CVS. http://db.ilug-bom.org.in/lug-authors/philip/bin/ Philip -- UNIX was not designed to stop you from doing stupid things, because that would also stop you from doing clever things. -- Doug Gwyn Visit my webpage at http://www.ncst.ernet.in/~philip/ Read my writings at http://www.ncst.ernet.in/~philip/writings/ MSN philiptellis Yahoo! philiptellis AIM philiptellis ICQ 129711328

1 0

Latest Cyberoam Client for linux
by Vishwanath V 05 Dec '01

05 Dec '01

Hi, Is anybody using the latest cyberoam client for linux ? The one in surceforge doesnt seem to work because probalby the version is different........ Does any body know hot to patch it up for usage with latest cyberoam software....... Plzz reply........ i dont wana use my windows system to get online u c ;-) ________________________________________________________________________ For Stock Quotes, Finance News, Insurance, Tax Planners, Mutual Funds... Visit http://in.finance.yahoo.com/

1 0

[Fowrarded] [Fsf-india] IT Policy Govt of Kerala
by Nagarjuna G. 05 Dec '01

05 Dec '01

----- Forwarded message from Arun M <arun(a)freedevelopers.net> ----- http://www.keralagov.com/ITpolicy.htm 15. Role of Open or Free Software The Government wishes to encourage the judicious use of open source/free software that complements/supplements proprietary software, to reduce the total cost of ownership of IT applications/solutions without compromising on the immediate and medium term value provided by the application. The Government welcomes research into the use of open/free software in the context of education, governance, and for general use at home, to make IT truly a part of the daily lives of the people of the State. The Government also encourages projects such as the Simputer that is low cost, based on open software, and attuned to the needs of the common man. What about other states ? _______________________________________________ Fsf-india mailing list Fsf-india(a)mm.gnu.org.in http://mm.gnu.org.in/mailman/listinfo/fsf-india ----- End forwarded message -----

1 0

[Commercial] New Versions Available
by mlist＠seascope.co.in 05 Dec '01

05 Dec '01

Our New Offers : Hi All, The following are the new versions avaiable with us : 1) Slackware 8.0 2cd set - Rs. 198/- 2) Slackware 8.0 Source CD - Rs. 99/- 3) Debian Potato 2.2 rev4 - 3cd binary set - Rs. 297/- 4) Mandrake 8.1 3cd set - Rs. 297/- 5) Redhat 7.2 Updates 1 cd set - Rs. 99/- 6) Suse Linux 7.3 Updates with kde2.2.2 1 cd set - Rs. 99/- 7) Suse Linux 7.2 Updates with kde2.2.1,gnome 1.4, ximian 1 cd set - Rs. 99/- 8) OpenBSD 3.0 2cd set - Rs. 198/- 9) Corel Linux 1.2 1cd set - Rs. 99/- shipping and handling charges will be extra. mail your orders to sales(a)seascope.co.in best regards, Sarin. Seacsope Infotech PVt. Ltd. http://www.seacope.co.in sales(a)seascope.co.in

1 0

(no subject)
by Sagar Sule 05 Dec '01

05 Dec '01

hi all again, so how does this reiserfs work? do i have to do anything special after my normal installation to enable reiserfs? i mean do i have to install any other package? please let me know. regards sagar ===== When you have hit rock bottom, The only way you can go is UP! __________________________________________________ Do You Yahoo!? Buy the perfect holiday gifts at Yahoo! Shopping. http://shopping.yahoo.com

1 0

- [ l i n k ] - Linux Applications and Utilities Page
by Navin Dhanuka 05 Dec '01

05 Dec '01

http://home.xnet.com/~blatura/linapps.shtml The Linux Applications and Utilities Page is a listing of Linux open source, commercial, shareware and freeware applications, utility programs, development tools and servers having their own web pages. All of the programs listed here have either a Linux native binary available, or source code available which has been successfully compiled to run under Linux. These programs are all currently available for use, though some may still be beta, or even alpha, releases Navin Dhanuka _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

1 0

looking for reiser fs
by Sagar Sule 04 Dec '01

04 Dec '01

hi all, i am looking for reiser fs. i am made to believe that suse distro supports reiser fs. does anyone has the lates suse distro? can he lend me the cd's for a couple of hrs. or if he has a cd writer can he make copies of it? i will get the blank cd's. also i would like some pointers as to how to install reiser fs. is it different from other installations? thanx in advance regards sagar ===== When you have hit rock bottom, The only way you can go is UP! __________________________________________________ Do You Yahoo!? Buy the perfect holiday gifts at Yahoo! Shopping. http://shopping.yahoo.com

2 1

kernel.org says "patch-2.4.11-dontuse.tar.bz2",
by Rahul Saxena 04 Dec '01

04 Dec '01

hello there, i am in the process of patching my kernel. however the patch for 2.4.11 at kernel.org has dont-use appended to its name, y is that?? can i just patch 2.4.11 and then patch with 12 and so on and get away with it ? BTW all this while i wasnt able ot patch any thing because i realised recently, that i didnt have "patch" installed! duhh.. :-) -rahul __________________________________________________ Do You Yahoo!? Buy the perfect holiday gifts at Yahoo! Shopping. http://shopping.yahoo.com

3 2

Linux v/s FreeBSD
by Bhushan Tiwari 04 Dec '01

04 Dec '01

http://www.byte.com/documents/s=1794/byt20011107s0001/1112_moshe.html -- ßhushån Tïwårï

6 9

Reposting the Welcome Message!
by Nagarjuna G. 03 Dec '01

03 Dec '01

Reposting the Welcome message that contains posting guidelines. ------------------------------------------------------------------------ Welcome to the GNU/Linux User Group of Bombay (ilug-bom)! Now that you are a member you can read and post mails to the group. The messages have to be related to propogating, using, trouble-shooting, bug-fixing, of GNU/Linux operating system. Feature comparision of other operating systems and distributions is allowed, but restrain from BASHING. GNU/Linux is possibly the most friendly operating system, and hence as users of the OS let us all maintain a FRIENDLY tone to our conversations on the list. YOU are the best judge to determine the relevance or irrelevance of your post to GNU/Linux, and therefore you are responsible for your postings. Since this is not a moderated list, please read the guidelines before posting mails to the list. The sole functioning of this list is based on the self disciplinary nature of its users. ILUG-Bom Mailing List participation Guidelines ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 1. Keep paragraphs and messages short and to the point. See that what you are writing is useful to the mailing list. If not, send it as a private message to the person. (Note that by default the mails go to the LIST) Please change the sender address appropriately before sending a personal mail. 2. When quoting another person, edit out whatever isn't directly applicable to your reply. Don't let your mailing software automatically quote the entire body of messages you are replying to when it's not necessary. Take the time to edit any quotations down to the minimum necessary to provide context for your reply. Nobody likes reading a long message in quotes for the third or fourth time, only to be followed by a one line response: "Yeah, me too." Messages larger than 10k will not be posted immediately. Such messages will need the list admins approval. 3. Focus on one subject per message and always include a pertinent subject title for the message, that way the user can locate the message quickly. Also please include a suitable header in case of Commercial / Offtopic mails. 4. Capitalize words only to highlight an important point or to distinguish a title or heading. Capitalizing whole words that are not titles is generally termed as SHOUTING! *Asterisks* surrounding a word can be used to make a stronger point. Use the underscore symbol before and after the title of a book, i.e. _Linux Configuration And Installation_ 5. Limit line length to approximately 65-70 characters and avoid control characters. 6. NEVER send chain letters to the mailing list. A mail simultaneously sent to more than 10 users will not reach the list. This is to eliminate possible spammers/bulk mailers to reach the list. 7. Be careful when using sarcasm and humor. Without face to face communications your joke may be viewed as criticism. When being humorous, use emoticons (smiley's) to express humor. (tilt your head to the left to see the emoticon smile) :-) = happy face for humor. 8. If a mail has offended you personally, please send a private message to the person expressing how you feel, instead of sending it to the mailing list. 9. Please remember that we have both male and female members. No gender abuse is allowed on the list, and do not include any gender specific slang in your posts. 10. Acronyms can be used to abbreviate when possible, however messages that are filled with acronyms can be confusing and annoying to the reader. Examples: IMHO = in my humble/honest opinion FYI = for your information BTW = by the way Flame = antagonistic criticism. http://www.jargon.org for more such acronymns. 11. Please provide URL's to articles wherever possible. Avoid cutting and pasting whole articles especially considering the fact that all may not be interested. In any case your posting maynot be more than 10k. Occassionally if you may have to send such a mail, post it, it will reach the members after the list admin approves it. 12. When using the mailing list for commercial purpose, please prefix the subject line with "COMMERCIAL". 13. Please *read all your mails before replying* to a mail. Probably someone has already answered to the mail. 14. Remember that most of the people are paying by the minute for their internet access. Hence please do not waste bandwidth. 15. Any violation to the above will be given a warning. 5 such warnings and the subscriber will be suspended from the mailing list for 15 days. Compiled by - (G.Sagar. with a few additions by Nagarjuna G. and Sandesh Rao)

1 0

(no subject)
by subhash nair 03 Dec '01

03 Dec '01

_________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp

2 1

Blocking telnet on a specified condition
by Manish Jethani 03 Dec '01

03 Dec '01

I want to know how I can block telnet access to my machine _when_a_specified_condition_is_true_. I have a lot of people telnetting to my m/c (in office) and then they run some heavy processes. As per the rules and requirements of the project, I'm not supposed to block telnet access completely. But under certain circumstances, I can block telnet access. The "certain circumstances" can be a set of rules. For example, if load average (w|head -1|cut -f3 -d,) is greater than some limit, or if the amount of free memory (free|tail -1|tr -s ' '|cut -f4 -d' ') falls below some limit, or something like that. I'm clueless, so... please help. Manish -- Abandon the search for Truth; settle for a good fantasy.

2 2

OT - Microsoft's excellent support !!!
by Kishor Bhagwat 02 Dec '01

02 Dec '01

I;ve been having problems writing cds on win98, so i was searching the support pages... I thought i had seen the pits, but this one takes the cake... there are two recommendations that MS makes to solve cd burning problems...and guess what they are? a) Use the original disc b) make another copy!!! i've been rofl for the past five minutes, after which i could sit up and write this mail to u guys..... for those who want to see for themselves, chk the page http://support.microsoft.com/default.aspx?scid=kb;EN-US;q186297 enjoy! kishor _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

2 1

kppp user access problems...
by Rohit 02 Dec '01

02 Dec '01

I have Red Hat 7.1 installed on my system. I use a Motorola SM56 internal modem. I have been trying to configure kppp for use by users other than the root on my system for the last few days. I can use the rp3 dialer as a normal user, but not kppp. The problem is : when I use kppp as a user, it is not able to open the modem. The error message on quering the modem being "sorry, can't open modem". the device i use is /dev/modem, which points to /dev/sm56. i have configured kppp for allowing users to dial out ( by creating kppp.allow in /etc ). When this didn't work, I tried setting the UID bit in pppd, but this did not solve my problem either. I am able to use kppp when logged in as root - i.e, the modem responds to the query modem command, and I can connect. Another thing though is that when logged in as root and while using kppp, the modem responds only to the /dev/modem device, it gives the error " modem is busy " when device is set as /dev/ttyS3. ( The modem is connected at COM4 ) As far as the permissions are concerned, all users have read and write access to the modem driver file. how do I get kppp to work when logged in as a user ? Rohit.

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

Linuxers