22 Sep
2001
22 Sep
'01
9:41 p.m.
Hi friends,
I am not able to load X windows on my node. I have booted the diskless node
under LTSP and I tried to load X windows. The mother board is intel 810e chipset.
I have also tried with Trident SVGA card. I am briefing here under the messages
appeared on the screen using both cards. Also I am attaching the lts.conf file
for reference. Please guide me how to go further to get X loaded in node.
XFS is running on the server when given the command
ps aux | grep xfs, it shown as follows.
xfs 1331 0.0 1.6 5312 4144 ? S Sep22 0:00 xfs -port -1
-dae
vinod 1805 0.0 0.2 1636 612 pts/1 S 00:34 0:00 grep xfs
--------------------------------------------------------------------------------------------
WHEN USED ON BOARD SVGA i810e
--------------------------------------------------------------------------------------------
(--) SVGA: Intel i810e
(--) SVGA: i810e MMID registers at ....
(--) SVGA: I810e : Linear framebuffer at ....
(--) SVGA: i810e: Using hardware cursor
(--) SVGA: Setting dot clock to 75.0 mMhz [0x17 0x6 0x20 ] [25 8 2 ]
(--) SVGA: choose watermark 0x2210a000: (tab.freq 75.0)
(--) SVGA: Using XAA (Xfree86 acceleration architecture)
(--) SVGA: XAA: solid filled rectangles
(--) SVGA: XAA: Screen-to-screen copy
(--) SVGA: XAA: 8x8 color expand pattern fill
(--) SVGA: XAA: Indirect CPU to screen color expansion (image text, polytext)
(--) SVGA: XAA: Using 8 128 x 128 areas for pixmap caching
(--) SVGA: XAA: catching tiles and stipples
(--) SVGA: XAA: Horizondal and vertical lines and segments
_FontTransSocketINETConnect: can't connect: errno=111
Failed to set default font path "tcp/192.168.0.254:7100
Fatel sever error:
Could not open default font 'Fixed'
When reporting a problem related to a server crash,
please send the full server output, not just the last message
INIT: ID "5" respawning too fast; disabled for 5 minuits
INIT: No more process left in this run level
--------------------------------------------------------------------------
When used Trident Card
--------------------------------------------------------------------------
(**) Mouse; buttons; 3
(**) SVGA; graphics device ID; "My video card"
(**) SVGS; Monitor ID: "My monitor"
(**) Font path set to "tcp/192.168.0.254:7100"
(--) SVGS; PCI; Trident tgui 9440 rev 227, memory @ 0xd5000000,0x5200000
(--) Trident chipset version; 0xee(TGUI9440AGi)
(--) SVGA; Revision 4.
(--) SVGA using Trident programable clocks
(--) SVGA chipset,(tgui9440agi)
(--) SVGA; Video ram 1024K
(**) SVGA; using 16 btp, Depth 16, Color weight :565
(--) SVGA; Maximum allowed dot-clock;45.000MHz
(--) SVGA; Clock for mode "1024x760" it is too high for the configurel
hardware.
Limit is 45,000 MHz
No valid mods found
When reporting a problem related to a server crash,
please send the full server output, not just the last message
INIT: ID "5" respawning too fast; disabled for 5 minuits
INIT: No more process left in this run level
#
# Config file for the Linux Terminal Server Project (www.ltsp.org)
#
[default]
#[ws001]
SERVER = 192.168.0.254
XSERVER = XF86_SVGA
XDM_SERVER = 192.168.0.254
X_MOUSE_PROTOCOL = "PS/2"
X_MOUSE_DEVICE = "/dev/psaux"
X_MOUSE_RESOLUTION = 400
X_MOUSE_BUTTONS = 3
USE_XFS = Y
LOCAL_APPS = N
LOCAL_WM = Y
UI_MODE = GUI
#------------------------------------------------------------------------------
#
# Example of specifying X settings for a workstation
#
[default]
X_RES_1 = 1024x768
X_HORZSYNC = 31-62
X_VERTREFRESH = 55-90
X_MODE_1024x768 = 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
MODULE_01 = agpgart.o
MODULE_02 = uart401.o
MODULE_03 = sb.o io=0x220 irq=5 dma 1
MODULE_04 = opl3.o
RUNLEVEL = 5
#
#------------------------------------------------------------------------------
#
# Example of a workstation configured to load some modules
#
#[default]
# MODULE_01 = agpgart.o # This is for i810 video
# MODULE_02 = uart401.o
# MODULE_03 = sb.o io=0x220 irq=5 dma=1
# MODULE_04 = opl3.o
#------------------------------------------------------------------------------
#
# Example of ws001 configured for local apps
#
#[ws001]
[default]
LOCAL_APPS = N
LOCAL_WM = Y
NIS_DOMAIN = ltsp
NIS_SERVER = 192.168.0.254
#------------------------------------------------------------------------------
#
# Example of a serial printer attached to /dev/ttyS1 on workstation ws001
#
[ws001]
PRINTER_0_DEVICE = /dev/ttyS1
PRINTER_0_TYPE = S # P-Parallel, S-Serial
PRINTER_0_PORT = 9100 # tcp/ip port: defaults to 9100
PRINTER_0_SPEED = 9600 # baud rate: defaults to 9600
PRINTER_0_FLOWCTRL = S # Flow control: S-Software (XON/XOFF),
# # H-Hardware (CTS/RTS)
PRINTER_0_PARITY = N # Parity: N-None, E-Even, O-Odd
# # (defaults to 'N')
PRINTER_0_DATABITS = 8 # Databits: 5,6,7,8 (defaults to 8)
#------------------------------------------------------------------------------
#
# Example of setting the ramdisk size to something other than the
# default of 1024k ( 1mb ). Make sure you also tag your kernel with
# and specify the new ramdisk size.
#
[ws001]
RAMDISK_SIZE = 8192
#