Hi all,
In the installation of the RHL7.1, I found that it does not allow me to install Workstation mode in a dual bootable system with a lilo prompt. So I decided to give cusom setup. But I still stucked up at the disk partitioning part. So can somebody tell me how should I partition the disk & mount it to the different mount points. My present disk partitions are:
The Disk Druid shows the following chart -------------------------------------------------------------------- Partitions Mount Point Device Requested Actual Type <not set> hda1 3898M 3898M win95 FAT32 <not set> hda5 3859M 3859M win95 FAT32 <not set> hda6 3859M 3859M win95 FAT32 <not set> hda7 3961M 3961M win95 FAT32
Add Edit Delete Reset Make RAID device (BTW wht is RAID) ---------------------------------------------------------------------- Drive Summery Device Geom [c/h/s] Total(M) Free(M) Used(M) used (%) hda [2481/255/63] 19461M 3883M 15578M 80 %
---------------------------------------------------------------------- So I have around 3.8GB for linux.
How much minimum space should I assign to these mount points:
/ /boot /usr /home /var /opt /tmp /usr/local
Do I need to assign any FAT partition to any mount point I tried this & found that only /home & /opt are allowed in the FAT partitons. Will it be OK if I assign them to FAT partition
Thanks & Regards, SAMEER :))
~~~~ Try Try till you get succeed
My Messanger IDs MSN : s2sameer Yahoo! : s9sameer RediffBol : s2sameer Indiatimes: s2sameer AIM : s2sameer