Linuxers November 2004

linuxers@mm.ilug-bom.org.in

96 participants
163 discussions

RE: [ILUG-BOM] [OT] My PC won't start...Please help!
by Sarfaraz Kazi 09 Nov '04

09 Nov '04

> On Sun Nov 7 7:06 , Sarfaraz Kazi <sarzkazi(a)yahoo.com> sent: > > >the motherboard manual says that you have to short the > >solder points in order to clear the cmos before you > >put in the new battery. can anybody please guide as to > >how to locate these solder points and how to short > >them. > > Clearing the CMOS is usually done by shorting two pins on the > motherboard using > a jumper. Details of where these two pins should be found > will/should be in the > motherboard manual. In certain motherboard types the CMOS is > cleared by keeping a > designated key depressed and switching it on. > In case you cannot locate the pins, CMOS can also be cleared > by removing the > CMOS battery. > Vivek IT WORKS....IT WORKS....IT WORKS!!!! Whew!! got the machine to run, at last. the contact between the cpu and the heatsink turned out to be the culprit. just took out the heatsink/fan, re-applied some thermal compound and put it back in. Voila! everything's fine with the world again!! Thanks to all of you for your kind help, advice and suggestions. ilug-bom rocks!!! yooohoooo :-). Sarfaraz. __________________________________ Do you Yahoo!? Check out the new Yahoo! Front Page. www.yahoo.com

2 1

Developing File Systems
by Concepts 09 Nov '04

09 Nov '04

Hello All, Concepts has always been in forefront for providing software professionals with right directions, methodology to ensure that they remain on cutting edge of development and continue to win, with quality training from experienced Industry Experts. We are extremely happy to announce first of its kind special �File System Driver Workshop�. Don�t miss this opportunity to see first-hand how Concepts illustrates File System Fundamentals with a discussion of broader operating systems issues for developers as well as practical issues related to development of FSD and Filter Drivers. Total Duration: 24-30 Hrs (Only on WeekEnds) Cost: Rs. 6000 per participant Venue: Concepts, Kothrud, Pune, India. If you have any queries feel free to call us on 020 56261180 / 09822773721. Or mail us at info(a)conceptssys.com Thanks & Regards, Team, Concepts. --------------------------------- Do you Yahoo!? Check out the new Yahoo! Front Page. www.yahoo.com

1 0

Linux home networking
by Pillai, Gishu R (GE Energy) 09 Nov '04

09 Nov '04

After a rush of blood to the head, I got Steven's network programming book and installed RHL 8 on my old machine.. But predictably enough, I got stuck in no time... after some tinkering with my drives and an accidental partition format, I have RHL8 on dual boot working . But the network doesn't work... So I have a machine running WinXP and lots of crunching power connected to my trusty P2 running Win98 and RHL8. The trouble now is that WinXP and Win98 autodetect network settings and able to communicate with each other. RHL 8 on the other hand is struggling to activate the ethernet card which it has detected. Task 1 : Activate the network card Task 2 : I think Samba is used to share files with Windows. What I need is to be able to browse the files on the Linux box via the Windows explorer and vice versa Any help or pointer to a how-to would be appreciated. Thanks, Gishu Pillai

3 2

[COMMERCIAL] Linux System Administrator Situation Vacant
by Hyper Tech 09 Nov '04

09 Nov '04

[COMMERCIAL] Linux System Administrator Situation Vacant Do you believe that you can make Open Source work for an Enterprise? If you are around 2 years experienced on Linux and have a sound knowledge on whats in Linux, please read on... Required Graduates / Post Graduates / Diploma Holders with 2 Years experience on Linux System Administration for employment in a consulting firm. The person will be deployed full time at a reputed client's Head Office. Totally Blue Collared job. So, Attitude Matters a lot. Knowing Linux well is technically the only requirement along with knowledge of any Programming Language. Knowledge of Perl for System Administration is an added advantage. Please mail in your Resumes with why you feel that _you_ can make OSS work to hypertech2k4(a)yahoo.com immediately. The early bird catches the worm obviously. __________________________________ Do you Yahoo!? Check out the new Yahoo! Front Page. www.yahoo.com

1 0

[Commercial] Job Opening for Project Manager - IT
by OSPOnline 08 Nov '04

08 Nov '04

We have an immedidate opening for Project Manager - IT for an International Company for their Mumbai branch. The candidate should be an MBA with atleast 3 yrs experience. Any exposure to Finance will be be preferred. The salary is between 2.5 - 3.0 lacs p.a. Its a permanent position. Those interested may reply off the list and mail their profiles to info(a)ospians.com at the earliest.

1 0

Re: [ILUG-BOM] [OT] My PC won't start...Please help!
by Vivek J.Patankar 08 Nov '04

08 Nov '04

On Sun Nov 7 7:06 , Sarfaraz Kazi <sarzkazi(a)yahoo.com> sent: >the motherboard manual says that you have to short the >solder points in order to clear the cmos before you >put in the new battery. can anybody please guide as to >how to locate these solder points and how to short >them. Clearing the CMOS is usually done by shorting two pins on the motherboard using a jumper. Details of where these two pins should be found will/should be in the motherboard manual. In certain motherboard types the CMOS is cleared by keeping a designated key depressed and switching it on. In case you cannot locate the pins, CMOS can also be cleared by removing the CMOS battery. Vivek ---- Get Urchin 6 On Demand web analytics. Because you can't wait to be found. http://www.urchin.com/?utm_campaign=U6OD&utm_medium=email&source=spymac.com…

1 0

[Announce] Linux Bangalore delegate registration open
by Philip Tellis 07 Nov '04

07 Nov '04

Linux Bangalore 2004 delegate registration is now open. Visit http://www.linux-bangalore.org/2004/register/ to register. Live registration stats available at http://www.linux-bangalore.org/2004/register/stats.php Philip -- The Shuttle is now going five times the sound of speed. -- Dan Rather, first landing of Columbia

1 0

RE: [ILUG-BOM] [OT] My PC won't start...Please help!
by Sarfaraz Kazi 07 Nov '04

07 Nov '04

> Sarfaraz, Sachin: > I'm facing exactly the same issue since last > two days. Have a feeling its something to do with SMPS. Because > I got it started once or twice randomly by touching the SMPS or > somewhere on the motherboard while powering on. (Earthing > problem?) Sarfaraz, pls keep me posted if you get any clue; > ditto from my side. > Veer. Hi Veer, guess what? i changed the smps and now the system starts up. one problem solved. but i'm into another soup now! as i mentioned in my first post, the system powered off suddenly while i was working on something. well, actually at that time i was trying to re-install windoze xp. i dual-boot with xp & gnu/linux (mandrake 9.1 - kernel 2.4.2<something>) . xp installed on c: and wasn't working. the system went off in the middle of the installation process. now when i start the machine, the fans work, hdd works, cd drive works but i don't get any display and no POST,i.e., i'm not getting the single beep on boot. the hdd activity led stays constantly on. indicates some problem with bios. does it has to do anything with the fact that i changed the cmos battery while the system was down? Sachinji, ramzaam mubarak aapko bhi! can you please help me out with this one? Regards, Sarfaraz. <sig> Danny : "They say I've paid my debt to the society." Tess : "Funny, I didn't receive a check!" - "Ocean's Eleven" </sig> __________________________________ Do you Yahoo!? Check out the new Yahoo! Front Page. www.yahoo.com

5 5

Re: [ILUG-BOM] [OT] My PC won't start...Please help!
by Vivek J.Patankar 07 Nov '04

07 Nov '04

On Sat Nov 6 5:19 , 'Rony Bill' <ronbilly(a)hotpop.com> sent: >> Ever heard about hydro foils? Good for small vessels. Not practical on >> larger ones. >Yes and seen one too in a Bond movie 'Thunderbird'. 'Thunderball' ---- Get Urchin 6 On Demand web analytics. Because you can't wait to be found. http://www.urchin.com/?utm_campaign=U6OD&utm_medium=email&source=spymac.com…

1 0

[ILUG-BOM] Unable to boot from new Image after compilation of kernel
by noel seq 07 Nov '04

07 Nov '04

Hi, I am trying to load scsi drivers on my RHL8.0 kernel 2.4.18-14. As per the driver docs, I need to rebuild the kernel with scsi support and then load the modules. I have run the following; make menuconfig make dep make bzImage The image is created in /usr/src/linux/arch/i386/boot directory and have copied the same to /boot edited /etc/grub.conf and added the new image as initrd /bzImage When I try to boot into linux using this kernel I get the following message. VFS: Cannot open boot device "LABEL=/" please append a correct "root=" boot option kernel panic :VFS: unable to mount root fs on 00:00 Am able to boot using the previously installed kernel. The other lines in grub.conf are copy/pasted and same as previous entries. Where am I going wrong. Do I really need to recompile the kernel or is there some other way to load the scsi drivers. One more info, once I make bzImage, it gives me the following information: Boot sector is 512 bytes setup is 4774 bytes ssytem is 1144 kb kernel is too high for standalone boot from floppy make [1] leaving ....... I tried deselecting some of the options like bluetooth, etc in make menuconfig, but the size of the bzImage does not go below 950Kb. Regards, Noel _________________________________________________________________ The all-new MSN Search. Get fast and precise results. http://search.msn.co.in Try it now!

2 1

← Newer
1
...
9
10
11
12
13
14
15
16
17
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

Linuxers November 2004